Search results for "Destructive testing"
showing 10 items of 88 documents
Autonomous Robotic Sensing for Simultaneous Geometric and Volumetric Inspection of Free-Form Parts
2022
Robotic sensing is used in many sectors to improve the inspection of large and/or complex parts, enhancing data acquisition speed, part coverage and inspection reliability. Several automated or semi-automated solutions have been proposed to enable the automated deployment of specific types of sensors. The trajectory to be followed by a robotic manipulator is typically obtained through the offline programmed tool paths for the inspection of a part. This method is acceptable for a part with known geometry in a well-structured and controlled environment. The part undergoing assessment needs to be precisely registered with respect to the robot reference system. It implies the need for a setup p…
Experimental and numerical method for nondestructive ultrasonic defect detection
2010
Ultrasonic methods are well known as powerful and reliable tool for defect detection. Conventional ultrasonic techniques rely generally on piezoelectric transducers where transmission of energy to the material is achieved with contact. In the last decades focus and interest have been directed to non-contact sensors and methods, showing many advantages over contact techniques where inspection depends on contact conditions (pressure, coupling medium, contact area). The growing interest is also due to the further development of air-coupled probes, thanks to new materials for acoustic devices and manufacturing technologies. The use of laser as tool for ultrasonic defect detection is also an eme…
Lock-In Signal Post-Processing Techniques in Infra-Red Thermography for Materials Structural Evaluation
2013
This paper describes the potential of off-line thermographic signal processing by means of Lock-In Correlation algorithms, in order to implement structural health monitoring and stress analysis techniques. Thermal datasets acquired by infrared thermocameras are locked-in and correlated numerically with opportune reference signals, and amplitude and phase values of various harmonics retrieved by means of a Fast Fourier Transform and time averaging based filtering. This information is then processed for NDT defect probing and for evaluating the Thermoelastic Effect induced temperature changes. Two case studies in particular are discussed, implementing the proposed signal lock-in processing: a…
Prediction of Airport Pavement Moduli by Machine Learning Methodology Using Non-destructive Field Testing Data Augmentation
2022
For the purpose of the Airport Pavement Management System (APMS), in order to optimize the maintenance strategies, it is fundamental monitoring the pavement conditions’ deterioration with time. In this way, the most damaged areas can be detected and intervention can be prioritized. The conventional approach consists in performing non-destructive tests by means of a Heavy Weight Deflectometer (HWD). This equipment allows the measurement of the pavement deflections induced by a defined impact load. This is a quite expensive and time-consuming procedure, therefore, the points to be investigated are usually limited to the center points of a very large mesh grid. Starting from the measured defle…
ARCHITECTURAL SURVEY TECHNIQUES FOR DEGRADATION DIAGNOSTICS. AN APPLICATION FOR THE CULTURAL HERITAGE
2021
Abstract. The great technological development in recent years in the field of architectural survey has made possible increasingly expeditious and less invasive investigations with the aim of acquiring a series of data related to the asset and fundamental for the protection of cultural heritage. In addition, the synergy between the various techniques represents an added value able, not only, to fill possible gaps and lacks arising from application limits of the instruments, but also to enhance the peculiarities of the same. This paper presents an integrated survey activity (range-based, image-based and IR thermography techniques) aimed at applying the combination and collaboration of multipl…
The infrared thermography control of the laser welding of amorphous polymers
2008
In laser welding technique, a real-time control of temperature distribution inside the irradiated materials is essential when attempting to optimize the process. For all laser welding methods that operate by the transmission principle, the difficulty of recording the developed temperature at the interface derives from the fact that materials to be welded are in contact throughout the entire process. In the present study, in order to overcome this issue, a contact-free method such the infrared thermography is used for surface temperature measurement. Corroborating this data with a numerical simulation of the temperature field evolution inside the components, an assessment of optimal process …
Model-assisted ultrasonic calibration using intentionally embedded defects for in-process weld inspection
2021
Abstract Automated in-process Non-Destructive Testing (NDT) systems are rapidly gaining traction within the manufacturing industry as they reduce manufacturing time and costs. When considering calibration and verification of such systems, creating defects of known geometry and nature during the deposition of a weld can: (I) help examine the capability of the automated system to detect and characterise defects, (II) be used to form a database of signals associated with different defect types to train intelligent defect classification algorithms, and (III) act as a basis for in-process gain calibration during weld inspection at high temperatures, where the ultrasound beam can be skewed as a r…
Adhesive debonding detection of FRP reinforcement by the ultrasonic non-destructive technique
2015
Fiber reinforced polymer (FRP) composite systems are extensively used for repairing and reinforc- ing structurally inefficient concrete structures. The performance of an FRP rehabilitation system is highly influenced by its integrity. In particular, the presence of defects, e.g. voids, inclusions, debonds, improper cure and delaminations, caused by an inaccurately manufacture and installation, may affect the capability of the rehabilitated structure. For this reason, non-destructive (ND) meth- ods could be used to assess the quality of the reinforcement [1,2]. In this work an ultrasonic ND technique for detecting delamination defects in FRP reinforcement is presented. The technique couples …
Simulation of laser generated ultrasound with application to defect detection
2008
Laser generated ultrasound holds substantial promise for use as a tool for defect detection in remote inspection thanks to its ability to produce frequencies in the MHz range, enabling fine spatial resolution of defects. Despite the potential impact of laser generated ultrasound in many areas of science and industry, robust tools for studying the phenomenon are lacking and thus limit the design and optimization of non-destructive testing and evaluation techniques. The laser generated ultrasound propagation in complex structures is an intricate phenomenon and is extremely hard to analyze. Only simple geometries can be studied analytically. Numerical techniques found in the literature have pr…
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
2017
Abstract The present work investigates the features of an active Infrared-NDT Thermography technique derived from a Flying Laser Spot set-up for the analysis of interlaminar disbonds in layered structures in general and Fibre Metal Laminates in particular. The presented technique uses a laser-spot heat source, which moves at a constant speed, raster scanning the object surface. Interlaminar defects parallel to the surfaces act as barriers towards through-the-thickness heat diffusion. This produces some modifications over the surface thermal field which are well identified in the Standard Deviation calculated over a Reference Area following the heat source. The mechanisms leading to such def…