Search results for "Diameter"
showing 10 items of 189 documents
Influence of material and diameter of pre-fabricated posts on maxillary central incisors restored with crown.
2009
Summary Numerous research works have studied the effect of post-design parameters on the mechanical behaviour of restored teeth without reaching any clear conclusions. Previous works by the authors ascertained the effect of material and post-dimensions for non-crowned restored teeth. The aim of this work was to study the effect of post-material and diameter for crowned teeth. First, an experimental fracture strength test was performed on eighteen extracted human maxillary central incisors. Teeth were decoronated, treated endodontically and restored (nine with glass fibre posts and nine with stainless steel posts). Several post-diameters were used. The final crown restoration was carried ou…
Speciation of chromium in natural waters by micropumping multicommutated light emitting diode photometry.
2007
Abstract A simple and sensitive multicommutated flow procedure, implemented by employing a homemade light emitting diode (LED) based photometer, has been developed for the determination of chromium (VI) and total chromium in water. The flow system comprised a set of four solenoid micro-pumps, which were assembled to work as fluid propelling and as commutating devices. The core of the detection unit comprised a green LED source, a photodiode and a homemade flow cell of 100 mm length and 2 mm inner diameter. The photometric procedure for the speciation of chromium in natural waters was based on the reaction of Cr (VI) with 1,5-diphenylcarbazide. Cr (III) was previously oxidized to Cr (VI) and…
Comparison between grain-size analyses using laser diffraction and sedimentation methods
2010
A comparison between laser diffraction method (LDM) and the sieve-hydrometer method (SHM) was carried out for 228 soil samples representing a different texture classification sampled in a Sicilian basin. The analysis demonstrated that the sand content measured by SHM can be assumed equal to that determined by LDM technique, while the clay fraction measured by LDM was lower than that measured by the SHM. A set of equations to transform LDM results to SHM results was proposed. The influence of the LDM measurements of clay on the estimated percentage of silt + very fine sand particles (particle diameter ranging from 0.002 mm to 0.1 mm), which is useful for estimating soil erodibility, was also…
Critical Appraisal of the Pore Structure of MCM-41
2006
Purely siliceous and aluminosilicate types of MCM-41 were synthesized and characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen sorption (NS) and size exclusion chromatography (SEC).
Diode-pumped self-Q-switched erbium-doped all-fibre laser
2004
A diode-pumped self-Q-switched erbium-doped fibre laser is developed and studied. The laser has an all-fibre configuration containing a piece of an active heavily erbium-doped fibre and two fibre Bragg grating mirrors and does not require any additional intracavity elements to obtain short pulses. Analysis of the laser operation suggests that the most probable mechanism of passive Q-switching of the laser cavity is absorption from the excited state of erbium resulting in the thermally induced nonlinear change in the refractive index in the erbium-doped fibre.
Statistical tools and control of internal lubricant content of inhalation grade HPMC capsules during manufacture
2016
The internal lubricant content (ILC) of inhalation grade HPMC capsules is a key factor to ensure good powder release when the patient inhales a medicine from a dry powder inhaler (DPI). Powder release from capsules has been shown to be influenced by the ILC. The characteristics used to measure this are the emitted dose, fine particle fraction and mass median aerodynamic diameter. In addition the ILC level is critical for capsule shell manufacture because it is an essential part of the process that cannot work without it. An experiment has been applied to the manufacture of inhalation capsules with the required ILC. A full factorial model was used to identify the controlling factors and from…
New Computational Fluid Dynamic Procedure to Estimate Friction and Local Losses in Coextruded Drip Laterals
2007
The design of trickle irrigation systems is crucial to optimize profitability and to warrant high values for the emission uniformity (EU) coefficient. EU depends on variation of the pressure head due to head losses along the lines and elevation changes, as well as the water temperature, and other parameters related to the emitters (manufacturer's coefficient of variation, number of emitters per plants, emitter spacing). Trickle irrigation plants are usually designed using small diameter plastic pipes (polyethylene or polyvinyl chloride). The design problem, therefore, needs to consider head losses along the lines as well as emitter discharge variations due to the manufacturer's variability.…
Discussion of “Analysis of Geometrical Relationships and Friction Losses in Small-Diameter Lay-Flat Polyethylene Pipes” by Giuseppe Provenzano, Vince…
2016
For a lay-flat drip line with an inner nominal diameter dn = 16 mm, characterized by three different pipe wall thicknesses, WT, 6, 8 and 10 mil, the Authors of the original paper very accurately investigated the geometrical expansion of the cross-sectional diameter as a function of different pressure head values, ranging in between 0.84-17.55 m. Results obtained by the Authors, for pressure heads not exceeding a threshold pressure value, showed significant d variations, in a very narrow range of pressure heads, which however is seldom considered in practice (less than 3 m). The Authors experimentally evaluated a modified Blasius’ law friction coefficient, c, equal to 0.285, corresponding to…
How to derive the analytical capacity model for not-conventional urban roundabouts
2008
The inapplicability of current methods for analyzing operations of urban not-conventional roundabouts (i.e. not referable to standard schemes) hampers seriously the assessment of their operational performances. Moreover, local constraints and the road network structure have produced lots of geometric layouts that make hard to propose an only framework to explain performances of not-conventional roundabouts. Also for these intersections it is hoped to have scientifically based methods to analyze operations with a proper reliability. Starting from these considerations, the paper shows the conceptual path followed to analyze operations at not-conventional roundabouts along an arterial of Paler…
Barrier properties of anti-gas military garments, considering exposure to gas organic compounds
2020
The problems of determining the protective properties of barrier materials used for the production of body surface protection products of an isolative type are very actual. These garments are expected to have long-term resistance against permeation of toxic substances. The paper deals with the study of the effect of organic solvent vapours on the changes in protective properties of selected anti-gas protective garments commonly used by the North Atlantic Treaty Organization armed forces. Permeation measurements of selected gases with integral permeameter were performed to verify their barrier properties, surface changes after exposure to selected solvents by using a 3D optical profilometer,…