Search results for "Diffuse reflectance infrared fourier transform"
showing 10 items of 54 documents
Photocatalytic activity of non-stoichiometric ZnFe2O4under visible light irradiation
2014
Nanostructured zinc ferrites with different excess iron contents (ZnFe2+zO4, where z = 0.00, 0.05, 0.10 and 0.15) have been synthesized using the sol–gel auto-combustion method. The effect of excess iron on the structural, optical and visible light photocatalytic activity of zinc ferrite samples has been investigated. X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), x-ray magnetic circular dichroism (XMCD), Brunauer–Emmett–Teller theory, scanning electron microscopy (SEM), diffuse reflectance spectroscopy (UV–Vis) and photoluminescence spectroscopy were used to characterize the synthesized non-stoichiometric ZnFe2O4 powders. The XRD patterns demonstrated that the samples con…
Photoactivity under visible light of metal loaded TiO2 catalysts prepared by low frequency ultrasound treatment
2017
Abstract Visible-light responsive bare and metal loaded (Pt, Ag, Rh, Pd) TiO 2 photocatalysts were prepared by using a simple ultrasound treatment. This method induced bulk oxygen deficiency resulting in a narrowing bandgap (from 3.18 to 3.04 eV) and in visible light absorption. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), BET specific surface area (SSA) and pore size distribution (PSD), UV–vis diffuse reflectance spectroscopy (DRS), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the samples was evaluated by using the 4-nitrophenol oxidation reaction and the photocatalytic oxidation of glucose w…
Influence of calcination on the structural properties of earth abundant Cu2ZnSnS4
2021
Abstract In the present work, we report on the synthesis of nano-crystalline kesterite copper zinc tin sulfide (CZTS) in powder form and the post-annealing process at high temperatures (calcination), and study their physical properties. We have successfully synthesized CZTS by direct fusion, and the resulting material was crushed to obtain a fine powder. Then, the resulting powder was calcined at high temperatures: 800–1000 ∘C. The calcined samples have been characterized with a number of different structural: X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and optical techniques: photoluminescence (PL), Raman and diffuse reflectance spectr…
Absolute crystallinity and photocatalytic activity of brookite TiO2 samples
2017
Abstract This study reports a method to determine the absolute crystallinity of partly crystalline brookite TiO2 photocatalysts. A natural, a commercial and various home-prepared brookite powders were characterized by X-ray diffraction analysis, Raman spectroscopy, scanning electron microscopy, UV–vis diffuse reflectance spectroscopy and nitrogen adsorption measurements. The absolute crystallinity was calculated from the ratio between the full width at half maximum intensity of the (121) X-ray diffraction peaks of the brookite samples and the (111) peak of CaF2 as internal standard. The photocatalytic activity of the powders was tested employing the photodegradation of 4-nitrophenol as well…
Photocatalytic degradation enhancement in pickering emulsions stabilized by solid particles of bare TiO 2
2019
Pickering emulsions provide a new way to enhance the efficiency of photocatalytic degradation of water-insoluble pollutants. Indeed, the semiconductor solid particles dually act as the photocatalyst and stabilizer of the emulsion droplets whose size dramatically affects the photocatalytic reaction. The present work aims at the validation of this concept by using bare TiO 2 without any surface modification. Nanostructured TiO 2 has been prepared by a simple sol-gel process and characterized by X-ray diffraction, specific surface area analysis, scanning electron microscopy, and diffuse reflectance spectroscopy. The emulsions were prepared by using 1-methylnaphthalene (1-MN) as a model organic…
Influence of low power CW laser irradiation on skin hemoglobin changes
2012
Influence of low power laser irradiance on healthy skin using diffuse reflectance spectroscopy and multispectral imaging was studied. Changes of diffuse reflectance spectra in spectral range from 500 to 600 nm were observed after 405 nm, 473 nm and 532 nm laser provocation, leading to conclusion that the content of skin hemoglobin has changed. Peaks in spectral absorbance (optical density) curves corresponded to well-known oxy-hemoglobin absorbance peaks at 542 and 577 nm.
Enhanced Solar Light Photocatalytic Activity of Ag Doped TiO2–Ag3PO4 Composites
2020
Composites comprised of Ag3PO4 and bare TiO2 (TiO2@Ag3PO4) or silver doped TiO2 (Ag@TiO2&ndash
N-TiO2 Photocatalysts highly active under visible irradiation for NOX abatement and 2-propanol oxidation
2013
N-doped TiO2 powders were prepared by two different sol-gel methods. Samples were characterised by X-ray diffraction (XRD), BET specific surface area measurements (SSA), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Electron Paramagnetic Resonance (EPR). XPS measurements revealed a signal at 400 eV assignable to nitrogen in the form of Ti-N-O. EPR signals are attributed to molecular NO trapped with cavities/defects possibly interacting with oxygen vacancies. The photocatalytic activity under UV and visible light was determined following the abatement of NOx and the photodegradation of 2-propanol in gas-solid systems. N…
Characterization and photoactivity of coupled ZnO-ZnWO4 catalysts prepared by a sol-gel method
2014
Abstract ZnO–ZnWO4 nanocomposites were synthesized by a novel sol–gel method and characterized through X-ray diffraction, BET specific surface area analysis, UV–Vis diffuse reflectance spectroscopy, scanning electron microscopy and transmission electron microscopy. The photocatalytic activity of the samples was evaluated using the degradation of 4-nitrophenol under UV light as probe reaction. The ZnO/ZnWO4 molar ratio was varied in order to study its influence on the photoefficiency of the mixed samples. The ZnO–ZnWO4 nanocomposites showed higher photoactivity than ZnO and ZnWO4. The high efficiency of the mixed samples was explained by the coupling and the intimate contact of two different…
Influence of platinum on catalytic activity of polycrystalline WO3 employed for phenol photodegradation in aqueous suspension
1998
Abstract A series of polycrystalline WO3 solids loaded with platinum (0.5; 1.0; 2.0 and 3.0 wt%) were prepared and characterised by X-ray diffraction, diffuse reflectance spectroscopy, scanning electron microscopy, specific surface areas determination, X-ray photoelectron spectroscopy. XPS and X-ray results indicate that the samples loaded with Pt up to 1 wt% contained on the surface mainly Pt(2+) species, while those loaded with higher amounts contained Pt(0). Moreover, the samples were employed for a probe reaction, i.e. phenol photooxidation in aqueous suspension, and their photoactivity was compared with that of two TiO2 commercial samples, mainly in the anatase phase. All the Pt–WO3 sa…