Search results for "Dispersion."
showing 10 items of 1094 documents
Resonant Raman characterisation of ultra-thin nano-protective carbon layers for magnetic storage devices
2003
Abstract Carbon thin films are very important as protective coatings for a wide range of applications such as magnetic storage devices. The key parameter of interest is the sp3 fraction, since it controls the mechanical properties of the film. Visible Raman spectroscopy is a very popular technique to determine the carbon bonding. However, the visible Raman spectra mainly depend on the configuration and clustering of the sp2 sites. This can result in the Raman spectra of different samples looking similar albeit having a different structure. Thus, visible Raman alone cannot be used to derive the sp3 content. Here we monitor the carbon bonding by using a combined study of Raman spectra taken a…
Heisenberg Exchange and Dzyaloshinskii–Moriya Interaction in Ultrathin Pt(W)/CoFeB Single and Multilayers
2021
We present results of the analysis of Brillouin light-scattering (BLS) measurements of spin waves performed on ultrathin single and multirepeat CoFeB layers with adjacent heavy metal layers. From a detailed study of the spin-wave dispersion relation, we independently extract the Heisenberg exchange interaction (also referred to as symmetric exchange interaction), the Dzyaloshinskii–Moriya interaction (DMI, also referred to as antisymmetric exchange interaction), and the anisotropy field. We find a large DMI in CoFeB thin films adjacent to a Pt layer and nearly vanishing DMI for CoFeB films adjacent to a W layer. Furthermore, the influence of the dipolar interaction on the dispersion relatio…
Untersuchungen zur Photoleitf�higkeit von alkoxysubstituierten Oligo- und Poly(1,4-phenylenethenylen)en
1994
Investigations on the Photoconductivity of Alkoxy Substituted Oligo- and Poly(1,4-phenyleneethenylene)s The photoreactivity and the photoconductivity of the mono- and dialkoxy substituted oligo- and poly(1,4-phenyleneethenylene)s 1/1′a-n were investigated in order to optimize the photoconducting properties of these materials. Increasing the length of the side chains enhances the average length of the main chain during the polycondensation and decreases the band gap till the limit of convergence is reached. The highest photoconductivity was observed for the 2,5-dipropyloxy system 1/1′j. Longer side chains render the charge transfer from chain to chain more difficult. The measurements were pe…
Bionanocomposite Blown Films: Insights on the Rheological and Mechanical Behavior.
2021
In this work, bionanocomposites based on two different types of biopolymers belonging to the MaterBi® family and containing two kinds of modified nanoclays were compounded in a twin-screw extruder and then subjected to a film blowing process, aiming at obtaining sustainable films potentially suitable for packaging applications. The preliminary characterization of the extruded bionanocomposites allowed establishing some correlations between the obtained morphology and the material rheological and mechanical behavior. More specifically, the morphological analysis showed that, regardless of the type of biopolymeric matrix, a homogeneous nanofiller dispersion was achieved
Improved carbon nanotubes dispersion through polar dispersant agents in polyamide
2016
The potential enhancement of the nanocomposite properties, with respect to the neat matrix, is strictly related to uniform distribution and dispersion of the nanofillers in the host polymer. In this work, two dispersant agents, particularly a polar wax and a silanol polyhedral oligomeric silsesquioxanes POSS, have been used in order to improve the dispersion of bare and functionalized carbon nanotubes in polyamide matrix. To ensure a good compatibility between matrix and nanofillers, the dispersing agents having specific polarity have been chosen, in order to match that of the matrix. Significant alterations of the mechanical and rheological behaviour due to dispersion action of used additi…
Relaxor ferroelectric ceramics of LiTaO3-type
1992
Abstract A ferroelectric relaxation has been identified in Li1-xCax (Ta1-xZrx)O3(x = 0.15 and 0.20) ceramics with LiTaO3-type structure. The relaxation frequency fr is minimum and the dispersion step (ϵ′S - ϵ′∞) is maximum at TC. When x increases, a higher conductivity associated with a lower activation energy and a decrease of the magnitude of fr at Tc are observed, while the unit cell volume becomes larger, TC lower and the transition more diffuse.
Phonon Dispersion of Wurtzite CdSe: The Bond Charge Model
2000
The phonon dispersion of wurtzite CdSe is presented along the main directions of the Brillouin zone. The study has been performed by using a bond charge model for wurtzite-type semiconductors with only six adjustable parameters. The results are compared against neutron scattering data and ab initio calculations. The phonon eigenvectors corresponding to the vibrational modes at the Γ-point are in very good agreement with the ab initio calculations.
Broadband Dielectric Spectroscopy of PSN-Rich PMN-PSN Ceramics
2008
The broadband dielectric permittivity of ordered 0.1PMN-0.9PSN and disordered 0.2PMN-0.8PSN ceramics was investigated. The anomaly of dielectric permittivity is clearly seen in the region of 370 K for 0.1 PMN-0.9 PSN at all frequencies. 0.2 PMN-0.8 PSN shows relaxor behaviour with huge frequency dispersion below 350 K. Calculated distribution of relaxation times shows noticeable influence of polar nano regions to the total dielectric spectrum below 320 K with the longest relaxation times edge diverging according to the Vogel-Fulcher law. In 0.1 PMN-0.9 PSN two a little overlapped peaks present in the distribution of relaxation times, influenced by displacive lead motions at high frequencies…
Description of Relaxor State in Na1/2Bi1/2TiO3-SrTiO3-PbTiO3 System of Solid Solutions
2011
Vogel-Fulcher law, traditionally applied to describe dispersion of dielectric permittivity in relaxor ferroelectrics, requires introduction of two different relaxation mechanisms above and below freezing temperature correspondingly. Extending distribution function of relaxation times, previously known for low-temperature region, allows creating common description of relaxation in all range, where distribution function of relaxation times can be regarded as wide, without freezing at certain temperature.
ELECTRICAL PROPERTIES OF LEAD FERROTANTALATE CERAMICS
2009
ABSTRACT Perovskite structures with high dielectric constants and magnetic properties play an important role in micro- and optoelectronics and have numerous practical applications. Relaxor type ferroelectric ceramics PbFe1/2Ta1/2O3 with perovskite structure was subject of present studies. Pyrochlore free lead ferrotantalate ceramics were produced by solid state technology from oxides. Low- and infra-low frequency studies of dielectric properties of PbFe1/2Ta1/2O3 ceramics have revealed considerable infra-low frequency dispersion at temperatures above the temperature of maximum dielectric permittivity. The observed dispersion described by lemniscates is due to a considerable Maxwell-Wagner r…