Search results for "Durability."
showing 10 items of 105 documents
Salt-fog spray aging of jute-basalt reinforced hybrid structures. Flexural and low velocity impact response
2017
Abstract In this work, a study on the aging resistance of jute and jute-basalt interply hybrid laminates exposed to salt-fog is presented with the aim to investigate the possibility to enhance the durability of natural fiber reinforced composites for marine application by a ply-substitution approach. In particular, jute and basalt/jute reinforced composite plates were manufactured by vacuum assisted resin infusion in two different staking sequences (i.e., intercalated and sandwich-like basalt-jute) and aged under salt fog conditions. The effects of the accelerated aging at increasing times on the mechanical response of laminates were assessed in both quasi static (three point bending) and d…
Friction and wear of lubricated M3 Class 2 sintered high speed steel with and without TiC and MnS additives
2005
Abstract M3/2 sintered high speed steel and composite materials processed by initial admixing of 5 wt.% TiC (to decrease wear) and 5 wt.% MnS (to minimise friction) powders, singly and in combination, were assessed in pin-on-disc tribometers specially constructed to simulate use in the automotive valve train. Pins were of the sintered materials and the mating tribological material discs of T1 high speed steel. For comparison with existing conventional materials, identical tests were performed with discs and pins of two types of spheroidal cast iron. Testing at ∼110 °C, employing a few drops of fresh Shell Helix Standard SAE: 15W-40, API: SJ/CF oil, in daily segments of 5000 m of sliding dis…
Durability of biodegradable polymers for the conservation of cultural heritage
2019
The use of polymers for conservation of cultural heritage is related to the possibility to slow down or stop natural deterioration which, in many cases, corresponds to stopping the entrance of liquid water and to favour spontaneous water vapour removal. Unfortunately, hydrophobicity is generally favoured by surface roughness and thus competitive with transparency. It is therefore important to find an optimal balance hydrophobicity, transparency and durability (especially to photooxidation). However, polymers typically used for applications in this field come from non-renewable resources and are not biodegradable. In this work, the mechanical, structural and optical properties of PLA, PBAT a…
Laboratory Tests for Assessing the Reliability and Durability of Innovative Cold-Glued 3D Glass Building Subcomponents
2020
The paper shows the results of analyses of the behavior of an innovative subcomponent made of two glass shells and a plastic thermal belt interfaced with a resin-based adhesive, in order to define the plastic material–adhesive combination able to guarantee compliance with the requirements related to mechanical strength, thermoacoustic insulation, dimensional stability, material compatibility, and durability. Two different types of ultraviolet (UV)-curing adhesive were used to establish the best plastic–adhesive combination. A study of the mechanical behavior and the reliability over time of the bonded assembly was conducted by performing accelerated weathering tests and tensile tests on 30 …
On the hydro-mechanical behaviour of a lime-treated embankment during wetting and drying cycles
2018
Abstract The paper presents some experimental results obtained on samples extracted from a full-scale embankment obtained by compacting a lime-treated clayey soil. A comprehensive test programme was carried out in order to highlight the improvement of mechanical behaviour induced by lime treatment as well as to assess the durability of the improved material, which may be affected by severe seasonal wetting and drying cycles. Direct shear tests, triaxial compression tests, swelling potential measurement and oedometric tests were performed on samples cured in controlled environmental conditions for at least 18 months. Wetting and drying cycles were applied in a very wide range of suction valu…
Influence of oxidation level of graphene oxide on the mechanical performance and photo-oxidation resistance of a polyamide 6
2019
The aim of this work is to study the relationship between the chemical-physical properties of graphene oxide (GO) and the performance of a polyamide 6 (PA6) in terms of mechanical reinforcement and resistance to UV-exposure. For this purpose, two samples of GO possessing different oxidation degrees were added (0.75 wt.%) to PA6 by way of a two-step technique and the materials achieved were carefully analysed from a morphological, chemical-physical, mechanical point of view. Photo-oxidation tests were carried out to assess the performance of this class of nanohybrids after 240 h of UV-exposure. The results reveal that both nanocomposites exhibit enhanced mechanical performance and durability…
Service Life of Cementitious Photocatalytic Paints Newly Formulated
2013
The use of photocatalytic products for surface coating of buildings contributes to the sustainability of building interventions, due to the reduction of some atmospheric pollutants and self-cleaning attitude. The world market produces a wide range of coatings, applied in limited thickness, transparent and opaque, high initial performance, although data on their durability are still missing. The knowledge of the performance over time of such innovative products is necessary according to the new EU Regulation No. 305/2011, which introduced for construction works, the seventh requirement on their sustainability and particularly their durability. The study concerns the evaluation of the durabil…
Experimental evaluation of the durability of innovative cementitious coatings: photocatalytic activity and colour
2012
Today, in a world context characterized by high pollution levels and increasingly limited natural resources, even in the building sector, focusing on environmental issues, through energy saving and a more rational use of these resources, both during construction and management, is fundamental. An important contribution in this direction is given by the knowledge of the durability of products and building components, especially when innovative products are applied and no information are available on the reliability and service life. The research concerns the evaluation of the durability of cement-based photocatalytic coatings ("rasanti" in the Italian diction), containing different types of …
Fe-N/C catalysts for oxygen reduction based on silicon carbide derived carbon
2017
This work was supported by the projects TK141 “Advanced materials and high-technology devices for energy recuperation systems” (2014-2020.4.01.15-0011), NAMUR “Nanomaterials - research and applications” (3.2.0304.12-0397) and by the Estonian Institutional Research Grant No. IUT20-13.
Methods for Enhancing the Thermal Durability of High-Temperature Thermoelectric Materials
2013
Author's version of an article in the journal: Journal of Electronic Materials. Also available from the publisher at: http://dx.doi.org/10.1007/s11664-013-2917-0 Thermoelectric materials, for example skutterudites and magnesium silicides, are being investigated as promising materials for medium-to-high-temperature waste heat recovery in transport and in industry. A crucial aspect of the success of a thermoelectric material is its stability over time when exposed to rapid heating and cooling. In this work different aspects of the degradation of these thermoelectric materials at high temperature were examined. Initial thermal durability was studied, and several candidate coatings were evaluat…