Search results for "Dynamic mechanical analysi"
showing 10 items of 82 documents
1989
A series of combined main-chain side-group liquid-crystalline polymers was synthesized by melt polycondensation from trans-1,4-cyclohexanedicarboxylic acid, chloro-1,4-phenylene diacetate and 6-(4-methoxy-4′-biphenylyloxy)hexyl-1,4-phenylene diacetate. These polyesters combine the features of rigid-rod main-chain LC-polymers and of side-group LC-polymers. Polymers with small fractions of mesogenic side-groups (5 and 10 mol-%) have lower melting points than the parent polymer poly(chloro-1,4-phenylene 1,4-cyclohexanedicarboxylate) but are still liquid crystalline up to their decomposition at T ≥ 400°C. In polymers with larger fractions of mesogenic side-groups (50 and 100 mol-%) partial isom…
Studies of network organization and dynamics of e-beam crosslinked PVPs: From macro to nano
2012
Abstract In this work the influence of poly(N-vinyl pyrrolidone) (PVP) concentration in water on the organization and dynamics of the corresponding macro-/nanogel networks has been systematically investigated. Irradiation has been performed at the same irradiation dose (within the sterilization dose range) and dose rate. In the selected irradiation conditions, the transition between macroscopic gelation and micro-/nanogels formation is observed just below the critical overlap concentration (∼1 wt%), whereas the net prevalence of intra-molecular over inter-molecular crosslinking occurs at a lower polymer concentration (below 0.25 wt%). Dynamic–mechanical spectroscopy has been applied as a cl…
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA
2012
Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…
Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins
2004
A vinylester – urethane hybrid resin (VEUH) was toughened by adding various vinyl-functionalized branched polyethers in 10 and 20 wt%. Two sets of hyperbranched polymers (HBPs) with different branching density were compared with a set of six-arm star polymers. Besides the architecture, the polymers also varied in their characteristics (molecular mass and mass distribution, vinyl/hydroxy ratio). The morphology of the modified VEUH was studied by dynamic-mechanical thermal analysis (DMTA), transmission (TEM) and scanning electron microscopy (SEM). The toughness was characterized by the fracture energy ðGcÞ determined on compact tension specimens at room temperature. It was established that th…
Mode I fracture toughness behavior of hydro-thermally aged carbon fibre reinforced DGEBA-HHPA-PES systems
2012
In this work the Mode I fracture toughness behavior of unidirectional CFRP laminates is investigated by means of Double Cantilever Beam (DCB) tests. The composite samples were manufactured by thermal curing after impregnation of a Carbon fabric with a DGEBA epoxy and anhydride HHPA curing agent. One resin batch was also mixed with a PES thermoplastic monomer to enhance the matrix toughness. Two lots of samples, toughened and un-toughened, were then left to soak in hot water to achieve various degrees of aging. The influence of matrix toughening and hydrothermal aging on the delamination behavior of the composite have then been assessed and correlated with characterization data from Dynamic …
1986
A procedure is described for the preparation of a block copolymer with A-B-A sequences in which ω-ω′-dihydroxy-poly-(ethylene glycol) is inserted between two polymeric monoacidic chains of polycaproamide and bonded to them by means of ester links. The resulting material was characterized. The copolymer is isomorphous with the polycaproamide. Thermal treatments induce a crystalline transition γ α as in polycaproamide. The influence of the moisture content on the glass transition temperature and on the storage modulus is discussed. Ein Verfahren zur Herstellung eines Blockcopolymers mit A-B-A-Sequenzen wird beschrieben. In dem Copolymer ist ω-ω′-Dihydroxy-polyethylenglycol uber Esterbindungen…
Macro-micro relationship in nanostructured functional composites
2012
This paper examines the results of the characterization of two functional composites: Poly(methyl methacrylate) (PMMA)-Ce:YAG (yttrium aluminium garnet doped with cerium) and PMMA-cobalt hexacyanoferrate (CoHCF). The composites were prepared as possible emitters in the fields of lighting thermal sensors. The prepared composites were char- acterized using transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) spectroscopy, thermogravi- metric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) analyses to study the correlation between micro and macro characteristics. We found that the molecular interactions of the two different fill…
Linear ViscoElastic (LVE) Behaviour of Pure Bitumen via Fractional Model
2012
AbstractBy fitting experimental data from static creep/recovery carried out on pure bitumen, it is shown that the fractional model proposed enables the description of both creep and recovery behaviour with fewer parameters than those needed by other models in the literature. In particular, the model is fitted to experimental data of complex modulus |G*| and phase angle δ° obtained from Dynamic Mechanical Analysis. Lastly, it is demonstrated that when the fractional model is used, complex modulus isotherms for a range of frequencies can be created simply starting from isochronals at f = 1Hz.
Thermal and Mechanical Characterization of Yarn Samples from Flemish Tapestry of the Sixteenth Century
2022
We propose a physico-chemical approach for theharacterization of the conservation condition of yarns from a Flemish tapestry of the sixteenth century. The aging effect on the yarns’ performance was evaluated by comparison with commercial materials. Water uptake experiments highlighted the aptitude of yarns toward water sorption and their increased hydrophilicity upon aging. Thermogravimetric analysis can be considered a fast approach for the fiber identification and assessment on the material life-time. The dynamic mechanical analysis provided direct evidence on the yarns, conservation state and their performance under different mechanical stresses. The proposed characterization path can be…