Search results for "ELECTRONICS"
showing 10 items of 4340 documents
Luminescence of the surface nonbridging oxygen hole center in silica: Spectral and decay properties
2008
We investigated the red luminescence in a porous film of silica nanoparticles, originating from surface nonbridging oxygen hole centers. The excitation spectrum was measured from 1.8 to 8.0 eV by a tunable laser system and a synchrotron radiation source; this spectrum evidences a peak at 2.0 eV, nearly overlapping with the emission, and an ultraviolet broadband with peaks at 4.8 and 6.0 eV. The emission is characterized by a spectrum with two subbands split by 0.07 eV, its decay occurs with lifetime longer than 30 microsec and undergoes a thermal quenching by a factor aboout 2 with increasing temperature from 10 to 290 K. The optical characteristics of surface and bulk centers are discussed…
Quantitative description of C-60 diffusion on an insulating surface
2010
The diffusion of ${\text{C}}_{60}$ molecules on large, atomically flat terraces of the ${\text{CaF}}_{2}(111)$ surface is studied under ultrahigh vacuum conditions at various substrate temperatures below room temperature. The weak molecule-substrate interaction on this insulating surface makes a direct observation of hopping events difficult. Therefore, to determine a quantitative value of the diffusion barrier, we employ the so-called onset method. This method is based on the analysis of spatial properties of islands created by nucleation of diffusing ${\text{C}}_{60}$ molecules, as measured by noncontact atomic force microscopy. We first determine the critical cluster size to be ${i}^{\en…
Global Synchronization via Homogeneous Nucleation in Oscillating Surface Reactions
1999
The mechanism leading to globally synchronized oscillations in the $\mathrm{CO}+{\mathrm{O}}_{2}/\mathrm{Pt}\left(110\right)$ reaction system is investigated by means of Monte Carlo simulations. The model considers the reconstruction of the surface via phase border propagation and spontaneous phase nucleation. The reason for global oscillations turns out to be the spontaneous phase nucleation. This nucleation, which is modeled as a weak noise process, results in a random creation of dynamic defects and leads to global synchronization via stochastic resonance. The mechanism of global coupling via the gas phase, as it is proposed to date, does not occur.
Dynamic carrier distribution in quantum wells modulated by surface acoustic waves
2001
We have investigated the dynamics of photogenerated carriers under surface acoustic wave (SAW) fields in GaAs quantum wells using spatially and time-resolved photoluminescence (PL). The frequency and phase of the PL oscillations under a SAW yield information about the carrier distribution and the band-gap modulation induced by the SAW. We directly prove that the transport properties of the carriers ultimately control their distribution, storage and, subsequent recombination in the modulated potential.
Light source inner surface changes depending on treatment
2008
Our work is connected with the preparation of different type of electrodeless discharge lamps. In this work we investigate the influence of the SiO2 glass wall treatment procedures on the inner surface of the electrodeless lamps. Three different treatment procedures were applied: vacuum cleaning, vacuum-thermal cleaning and training in the high frequency discharge. The surface modification has been investigated by means of atomic force microscopy. Substantial changes of the SiO2 glass surface have been observed. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Investigation on the influence of the surface resin rich layer on the thermoelastic signal from different composite laminate lay-ups
2006
This work presents a set of experimental results based on the measured thermoelastic signal from GRP composite coupons adopting different lay-ups. A comparison is made with the thermoelastic signal predicted by two different analytical models: one based on the classical law of the thermoelastic effect for orthotropic materials, and the other based on a novel theory accounting for the presence of a resin layer on the external surface of the composite structure. The composite coupons were designed such to determine a significant difference in the predictions made by the two theoretical models. Experimental results have shown a far better match with the predictions based on the novel theory ac…
Surface Reflectance: An Optical Method for Multiscale Curvature Characterization of Wear on Ceramic–Metal Composites
2020
Surface gradient characterization by light reflectance (SGCLR) is used for the first time for multiscale curvature calculations and discrimination of worn surfaces on six damaged ceramic&ndash
AES and CEMS analysis of the formation of layers on Si steel under thermal treatment in a flux of H2/water vapour
1991
The near surface diffusion and reaction processes in iron-silicon steel (3.1 wt.%Si) during 10 min decarburization in water vapour/hydrogen have been studied. The decarburization temperature has been varied between 506 and 714°C for the fixed partial pressure ratio pH2O/pH2=0.017. An outer layer of SiO2 forms on the surface with its thickness increasing with temperature. From 600°C upwards, the decarburization process is hindered and a cementite layer is formed below the SiO2 layer. The formation of fayalite at the surface has been studied at a fixed decarburization temperature with pH2O/pH2 ranging from 0.017 to 0.49. The scale thickness reduces abruptly just before the ratio pH2O/pH2 nece…
Competition between surface reaction and diffusion of gold deposited onto ZrTe3
2003
Abstract Surface reaction and diffusion of gold, deposited onto the (0 0 1) ZrTe 3 van der Waals (vdW) surface, is studied by transmission electron and scanning tunneling microscopy. It is shown that both processes compete at temperatures as low as room temperature. In case of diffusion the deposited gold mostly disappears from the surface and intercalates into the vdW gaps of the substrate. Residual unreacted gold agglomerates are rather mobile and are often displaced by the scanning tip along the [1 0 0] direction of the substrate. In case of reaction, which usually takes place at somewhat higher substrate temperatures, grains of Zr 3 Te 2 , AuTe 2 and/or Au 2 Te 3 are formed. Contrary to…
Modeling and simulation of a digital control design approach for power supply systems
2006
Electronic designers need to model and simulate system features as close as possible to its effective behaviour. Moreover, today, electronics systems are often composed of mixed analog and digital components. The increasing complexity has led to the use of different simulation softwares, each one specific for a particular level of abstraction: mathematical, circuital, behavioural, etc. In order to simulate the entire system these softwares should work together: co-simulation is necessary for digitally controlled power electronics systems. In this paper, the modeling of a digitally controlled switching power supply system using MATLAB/Simulink, ALDEC Active-HDL and Powersys PSIM is presented…