Search results for "ELT"
showing 10 items of 2198 documents
Modeling of Melt Flow and Heat Transfer in Stationary Gas Tungsten Arc Welding with Vertical and Tilted Torches
2021
A 3D numerical simulation was conducted to study the transient development of temperature distribution in stationary gas tungsten arc welding with filler wire. Heat transfer to the filler wire and the workpiece was investigated with vertical (90°) and titled (70°) torches. Heat flux, current flux, and gas drag force were calculated from the steady-state simulation of the arc. The temperature in the filler wire was determined at three different time intervals: 0.12 s, 0.24 s, and 0.36 s. The filler wire was assumed not to deform during this short time, and was therefore simulated as solid. The temperature in the workpiece was calculated at the same intervals using heat flux, current flux, ga…
A study of hydrothermal convection in saturated porous media
1993
Abstract Because of its relevance to many geological and technical problems, hydrothermal convection is investigated here mainly with the aid of numerical models by a systematic analysis of the properties of this type of convection for a range of super-critical Rayleigh numbers. Calculations were performed for two-dimensional models with constant properties in a region of aspect ratio 2. The principal results in the case of temperature fixed at the impermeable top and bottom are the following for the Nusselt number Nu, the cell aspect ratio a, and the boundary layer thickness δ: Nu ≈ 1.7 R0.5, a ≈ 1.3 R−0.4, δc ≈ 0.4 R−0.4 for 2.5 R = R f /R f ∗ and Rf and R f ∗ are the ambient and critical…
Influence on the macrosegregation of binary metallic alloys by thermoelectromagnetic convection and electromagnetic stirring combination
2014
International audience; Influence of a slowly rotating 0.5 T transverse magnetic field on the directionally solidified metallic alloy has been experimentally studied in this work. Main idea is to study an influence on the melt flow and material structure caused by the simultaneous electromagnetic stirring and thermoelectromagnetic convection with comparable magnitudes. Electromagnetic stirring and thermoelectromagnetic convection intensities have been estimated analytically to find optimal experimental parameters. It is experimentally demonstrated that with such an interaction it is possible to modify component macrosegregation of Sn-10 wt% Pb alloy. Helical macrosegregation within cylindri…
Breakdown of Burton-Prime-Slichter approach and lateral solute segregation in radially converging flows
2005
A theoretical study is presented of the effect of a radially converging melt flow, which is directed away from the solidification front, on the radial solute segregation in simple solidification models. We show that the classical Burton-Prim-Slichter (BPS) solution describing the effect of a diverging flow on the solute incorporation into the solidifying material breaks down for the flows converging along the solidification front. The breakdown is caused by a divergence of the integral defining the effective boundary layer thickness which is the basic concept of the BPS theory. Although such a divergence can formally be avoided by restricting the axial extension of the melt to a layer of fi…
The New Gnosis and the Denial of Ontological Differences
2021
The current transhumanist or posthumanist movements continue the thesis of the old gnosis devaluing the creation like something imperfect. Its novelty is to believe in the possibility of overcoming the creation thanks to technology (biotechnology and bionics). The ideology of gender partly anticipates this way of thinking by devaluing the somatic difference between male and female. This denial of the differences then applies to those existing between the human and the non-human (on one side the primates, and on the other the computer). Posthumanism and transhumanism believe that technology will not only overcome the ontological differences, which form the human, but also the so-called extre…
Contribution to the study of physico-chemical properties of surfaces modified by last treatment : application to the enhancement of localized corrosi…
2011
Metallic materials are more and more used in severe conditions with particularly strong request for improving their behavior in aggressive environment and especially over long periods. The objective of this PhD work is to estimate the potentiality of a laser surface melting treatment on the improvement of the stainless steel 304L corrosion resistance, surface treatments by laser can be revisited on the basis of a recent change in the laser technology. In the frame of this work, a nano-pulsed laser fiber was chosen : it allows the treated surface to be melted for few microns in depth, followed by an ultra-fast solidification occuring with cooling rates up to 1011 K/s. The combination of thes…
Similarity Solutions and Collapse in the Attractive Gross-Pitaevskii Equation
2000
We analyse a generalised Gross-Pitaevskii equation involving a paraboloidal trap potential in $D$ space dimensions and generalised to a nonlinearity of order $2n+1$. For {\em attractive} coupling constants collapse of the particle density occurs for $Dn\ge 2$ and typically to a $\delta$-function centered at the origin of the trap. By introducing a new dynamical variable for the spherically symmetric solutions we show that all such solutions are self-similar close to the center of the trap. Exact self-similar solutions occur if, and only if, $Dn=2$, and for this case of $Dn=2$ we exhibit an exact but rather special D=1 analytical self-similar solution collapsing to a $\delta$-function which …
Approximate Closed-Form Solutions for the Shift Mechanics of Rubber Belt Variators
2009
The mechanical behavior of V-belt variators during the speed ratio shift is different from the steady operation as a gross radial motion of the belt is superimposed to the circumferential motion. The theoretical analysis involves equilibrium equations similar to the steady case, but requires a re-formulation of the mass conservation condition making use of the Reynolds transport theorem. The mathematical model of the belt-pulley coupling implies the repeated numerical solution of a strongly non-linear differential system. Nevertheless, an attentive observation of the numerical diagrams suggests simple and useful closed-form approximations for the four possible working modes of any pulley, o…
Age and tectonic setting of Late Archean greenstone-gneiss terrain in Henan Province, China, as revealed by single-grain zircon dating
1988
The authors report precise U-Pb zircon ages for single grains of a metarhyodacite from the Late Archean Dengfeng greenstone belt in Henan Province, China, near the southern margin of the North China craton. Most grains belong to an igneous population whose U-Pb isotopic systematics define a straight line intersecting concordia at 2512 +/- 12 Ma, and this is interpreted as the time of crystallization of the original greenstone volcanics. Several grains are distinctly older, between 2576 +/- 9 and 2945 +/- 44 Ma, and the authors interpret the older grains as xenocrysts of pre-greenstone continental crust that provide evidence for crustal derivation or crustal contamination of the original rhy…
Geochemistry of Neoarchean (ca. 2.55-2.50 Ga) volcanic and ophiolitic rocks in the Wutaishan greenstone belt, central orogenic belt, North China crat…
2007
We read with interest the contribution by [Polat et al. (2005)][1] on the origin of Neoarchean volcanic and ophiolitic rocks in the Wutaishan greenstone belt, northern China, and their geo-dynamic setting. We do not dispute the quality of the authors' data and their interpretations, but we disagree