Search results for "EPOXY"

showing 10 items of 384 documents

The effect of curing conditions on the electrical properties of an epoxy resin

2016

010302 applied physicsMaterials science0205 materials engineering020502 materialsvisual_art0103 physical sciencesvisual_art.visual_art_medium02 engineering and technologyEpoxyComposite material01 natural sciencesCuring (chemistry)
researchProduct

Quasi-static behaviour and damage assessment of flax/epoxy composites

2015

Experimental investigations were conducted on flax and E-glass fibres reinforced epoxy matrix composites subjected to quasi-static loadings. Flax/epoxy samples having [0]12, [90]12, [0/90]3S and [±45]3S stacking sequences, with a fibre volume fraction of 43% have been tested under tension, compression and in-plane shear loadings. Overall, the compression strength of glass/epoxy was 76% greater than for the flax/epoxy composite. The damage evolution of flax/epoxy of [0/90]3S and [±45]3S samples has been evaluated in terms of transverse crack densities with respect to the load increment. The crack density exhibited a classical “S” shaped pattern for [0/90]3S and linearly for [±45]3S specimens…

010302 applied physicsMatériaux [Sciences de l'ingénieur]Materials sciencePolymer-matrix compositesComposite numberMechanical properties02 engineering and technologyEpoxy matrixEpoxy021001 nanoscience & nanotechnologyE-glass fibres01 natural sciences[SPI]Engineering Sciences [physics]Compressive strengthDamage mechanicsDamage mechanicsvisual_art0103 physical sciencesVolume fractionvisual_art.visual_art_mediumFlax fibresMécanique: Mécanique des matériaux [Sciences de l'ingénieur]Composite material0210 nano-technologyQuasistatic process
researchProduct

Synergistic effect of fiber content and length on mechanical and water absorption behaviors of Phoenix sp. fiber-reinforced epoxy composites

2016

Phoenix sp. fiber-reinforced epoxy composites have been manufactured using compression molding technique. The effect of reinforcement volume content (0%, 10%, 20%, 30%, 40%, and 50%) and size (300 µm particles, 10 mm, 20 mm, and 30 mm fibers) on quasi-static and dynamic mechanical properties was investigated. Moreover, the water absorption properties of composites were analyzed at different environmental conditions (10℃, 30℃, and 60℃). For each reinforcement size, composites loaded with 40% in volume show highest tensile and flexural properties. Furthermore, composites with 300 µm particles present the best impact properties and the lowest water absorption, regardless of the environmental …

010302 applied physicsVolume contentAbsorption of waterMaterials sciencePolymers and PlasticsMaterials Science (miscellaneous)dynamic mechanical propertieCompression molding02 engineering and technologyEpoxy021001 nanoscience & nanotechnology01 natural sciencesIndustrial and Manufacturing Engineeringwater absorptionvolume fractionvisual_art0103 physical sciencesVolume fractionvisual_art.visual_art_mediummechanical propertieChemical Engineering (miscellaneous)FiberComposite materialPhoenix sp. fiber0210 nano-technologyJournal of Industrial Textiles
researchProduct

A delamination test for structural wood adhesives used in thick joints

2001

A test method was developed for the measurement of delamination of structural wood adhesives applied in thick joints. Large differences were observed within a range of 8 commercial epoxy-based products.

010407 polymersMaterials scienceAdhesive bondingJOINT[SDV]Life Sciences [q-bio]DelaminationForestry02 engineering and technologyTest methodEpoxy021001 nanoscience & nanotechnology01 natural sciences0104 chemical sciencesvisual_art[SDV.IDA]Life Sciences [q-bio]/Food engineeringvisual_art.visual_art_mediumGeneral Materials Science[SPI.GPROC]Engineering Sciences [physics]/Chemical and Process EngineeringAdhesiveComposite material0210 nano-technologyComputingMilieux_MISCELLANEOUS
researchProduct

Toxicological implications of enzymatic control of reactive metabolites.

1990

Many foreign compounds are transformed into reactive metabolites, which may produce genotoxic effects by chemically altering critical biomolecules. Reactive metabolites are under the control of activating, inactivating and precursor sequestering enzymes. Such enzymes are under the long-term control of induction and repression, as well as the short-term control of post-translational modification and low molecular weight activators or inhibitors. In addition, the efficiency of these enzyme systems in preventing reactive metabolite-mediated toxicity is directed by their subcellular compartmentalization and isoenzymic multiplicity. Extrapolation from toxicological test systems to the human req…

0301 basic medicineHealth Toxicology and MutagenesisMetaboliteMolecular Sequence DataMutagenBiologyToxicologymedicine.disease_causeGene Expression Regulation Enzymologic03 medical and health scienceschemistry.chemical_compound0302 clinical medicineCytosolEthers CyclicMicrosomesmedicineHumansPsychological repressionCarcinogenGlutathione Transferasechemistry.chemical_classificationEpoxide Hydrolases030102 biochemistry & molecular biologyBase SequenceBiomoleculeGeneral MedicineIsoenzymesEnzymeBiochemistrychemistry030220 oncology & carcinogenesisToxicityEpoxy CompoundsXenobioticHumanexperimental toxicology
researchProduct

Re-definition and supporting evidence toward Fanconi Anemia as a mitochondrial disease: Prospects for new design in clinical management

2021

Fanconi anemia (FA) has been investigated since early studies based on two definitions, namely defective DNA repair and proinflammatory condition. The former definition has built up the grounds for FA diagnosis as excess sensitivity of patients' cells to xenobiotics as diepoxybutane and mitomycin C, resulting in typical chromosomal abnormalities. Another line of studies has related FA phenotype to a prooxidant state, as detected by both in vitro and ex vivo studies. The discovery that the FA group G (FANCG) protein is found in mitochondria (Mukhopadhyay et al., 2006) has been followed by an extensive line of studies providing evidence for multiple links between other FA gene products and mi…

0301 basic medicineMitochondrial DNAMitochondrial DiseasesMitomycinMitochondrial diseaseClinical BiochemistryDiepoxybutaneReview ArticleMitochondrionBiologyBiochemistry03 medical and health scienceschemistry.chemical_compound0302 clinical medicineFanconi anemiaFANCGmedicineHumansClastogenCarnitinelcsh:QH301-705.5Coenzyme Q10lcsh:R5-920ProteinOrganic ChemistryMitochondrial nutrientProteinsmedicine.diseaseMitochondrial diseaseFanconi AnemiaPhenotypeClastogens030104 developmental biologylcsh:Biology (General)chemistryProoxidant stateCancer researchMitochondrial nutrientsMitochondrial dysfunctionlcsh:Medicine (General)030217 neurology & neurosurgeryHumanmedicine.drugRedox Biology
researchProduct

CCDC 235065: Experimental Crystal Structure Determination

2005

Related Article: G.Stajer, F.Miklos, I.Kanizsai, F.Csende, R.Sillanpaa, P.Sohar|2004|Eur.J.Org.Chem.|2004|3701|doi:10.1002/ejoc.200400247

14-epoxy-6a-p-tolyl-144a6b7891010a12a-decahydro-5H-isoindolo[21-a][31]benzoxazin-11(6aH)-oneSpace GroupCrystallographyCrystal SystemCrystal StructureCell ParametersExperimental 3D Coordinates
researchProduct

CCDC 1575390: Experimental Crystal Structure Determination

2017

Related Article: V. Piccialli, A. Tuzi, R. Centore|2017|Acta Crystallogr.,Sect.E:Cryst.Commun.|73|1603|doi:10.1107/S2056989017013391

9alpha11alpha-epoxy-5alpha-cholest-7-ene-3beta56alpha-triol 36-diacetateSpace GroupCrystallographyCrystal SystemCrystal StructureCell ParametersExperimental 3D Coordinates
researchProduct

Absorption kinetics and swelling stresses in hydrothermally aged epoxies investigated by photoelastic image analysis

2015

Abstract The present work proposes an experimental optical methodology able to measure the transient swelling stresses induced by the water uptake ageing of polymers. In particular, the work describes the implementation of a Photoelastic technique to quantify internal stresses arising during the hydrothermal ageing of cast epoxy samples. The material investigated is a model DGEBA/DDS epoxy system. Curing and post-curing cycles have been optimised in order to obtain a fully cured, high T g , and completely stress free initial condition. Rectangular beam samples were then left in a hydrothermal bath at 90 °C, and regularly monitored by gravimetric and photoelastic analyses. The quantitative e…

Absorption of waterMaterials sciencePhotoelastic stress analysiPolymers and PlasticsThermosetting polymerSwelling stresseSettore ING-IND/14 - Progettazione Meccanica E Costruzione Di MacchineDesorptionMaterials ChemistrymedicineComposite materialSettore ING-IND/15 - Disegno E Metodi Dell'Ingegneria IndustrialeCuring (chemistry)chemistry.chemical_classificationHydrothermal ageingPolymerEpoxyCondensed Matter PhysicschemistryMechanics of Materialsvisual_artThermosetting resinvisual_art.visual_art_mediumGravimetric analysisSettore CHIM/07 - Fondamenti Chimici Delle TecnologieSwellingmedicine.symptom
researchProduct

Basalt Fibre Composite with Carbon Nanomodified Epoxy Matrix under Hydrothermal Ageing

2021

This work aimed to investigate the effect of hybrid carbon nanofillers (e.g., carbon nanotubes/carbon nanofibers in the ratio 1:1 by mass) over the electrical and flexural properties for an epoxy matrix and corresponding basalt fibre reinforcing composite (BFRC) subjected to full-year seasonal water absorption. Hydrothermal ageing was performed by full immersion of the tested materials into distilled water according to the following model conditions (seasons). The mechanical properties were measured in three-point bending mode before environmental ageing and after each season. Upon environmental ageing, the relative change of flexural strength and elastic modulus of the epoxy and NC was wit…

Absorption of waterMaterials sciencePolymers and PlasticsComposite numberchemistry.chemical_elementCarbon nanotubemechanical propertiesArticleepoxylaw.inventionlcsh:QD241-441lcsh:Organic chemistryFlexural strengthlawwater absorptionpolymer compositecarbon nanofillerComposite materialNanocompositeCarbon nanofiberGeneral ChemistryEpoxyhydrothermal ageingchemistryvisual_artelectrical resistancevisual_art.visual_art_mediumCarbonPolymers
researchProduct