Search results for "EPOXY"
showing 10 items of 384 documents
Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage
2011
International audience; It is shown that an analogy can be made between the failure of unidirectional carbon fibre reinforced epoxy plates and filament wound carbon fibre composite pressure vessels and that their strengths and failure probabilities can be determined. Fibres in filament wound composite structures are placed on geodesic paths around the mandrel, which becomes the liner; so that when the structure is pressurised the fibres are only subjected to tensile forces, as in a unidirectional composite. Multiscale modelling reveals that composite failure is controlled by fibre breakage and that clustering of fibre breaks determines ultimate reliability of the structure. Time dependent r…
Prediction of crack onset strain in composite laminates at mixed mode cracking
2009
Failure process of continuous fiber reinforced composite laminates in tension usually starts with appearance of intralaminar cracks. In composite laminates with complex lay-ups and/or under combined loading, intralaminar cracks may develop in plies with different reinforcement directions. A necessary part of mixed mode cracking models is the criterion of failure. For propagation-controlled fracture it is usually formulated in terms of energy release rates and their critical values of the particular composite material. Intralaminar fracture toughness of unidirectionally reinforced glass/epoxy composite was experimentally determined at several mode I and mode II ratios. It is found that the c…
Vinylphenylglycidyl ether-based colloidal architectures: high-functionality crosslinking reagents, hybrid raspberry-type particles and smart hydropho…
2014
An efficient synthetic strategy for the preparation of monodisperse colloidal core/shell architectures with reactive epoxy functionalities is reported, based on the bifunctional vinylphenylglycidyl ether monomer. Accessibility of the reactive immobilized epoxy moieties was quantified by UV/vis spectroscopy in an isorefractive medium. Inorganic–organic hybrid raspberry-type architectures revealed a tremendous inpact on the surface wettability of water.
Use of kinetic DTA and TG methods for compatibility tests on 2,4,6--trinitrotoluene
1986
We have investigated the suitability of thermoanalytical methods for compatibility tests on explosives and contact materials. DTA and TG curves of various materials were evaluated using two DTA and four TG methods and one DSC method. TNT was used as model substance. The contact materials were paraffin, polyethylene, an epoxy resin paint and an epoxy glue. In earlier tests the first two were found compatible and the latter two incompatible with TNT. None of the methods provides an absolute value for the activation energy. However, in compatibility tests only the relative change in the activation energy is of interest and, for this, three of the methods proved informative.
The effect of a liquid CTBN rubber modifier on the thermo-kinetic parameters of an epoxy resin during a pultrusion process
2003
Abstract Rheo-kinetic behaviour of an epoxy resin, coupled with an anhydride hardener, with different CTBN liquid rubber concentration (0–15 phr), used in fibre reinforced plastics, was analysed comparing experimental data with theoretical models. The modelling of technological pultrusion process for thermoset matrix composites, developed through a numerical code realised with MATLAB, is reported, too. The model includes conduction and cure heat, degree of cure and viscosity evolution during the curing within the die. Considerable differences in process condition, using different rubber amount, are obtained. The numerical modelling of process conditions shows that the CTBN rubber presence i…
Epoxy composites filled with high surface area-carbon fillers
2013
Citation: J. Appl. Phys. 114, 164304 (2013); doi: 10.1063/1.4826529 (Received 24 July 2013; accepted 6 October 2013; published online 22 October 2013) A comprehensive analysis of electrical, electromagnetic (EM), mechanical, and thermal properties of epoxy resin composites filled with 0.25–2.0 wt. % of carbon additives characterized by high surface area, both nano-sized, like carbon nanotubes (CNTs) and carbon black (CBH), and micro-sized exfoliated graphite (EG), was performed. We found that the physical properties of both CNTs- and CBH-based epoxy resin composites increased all together with filler content and even more clearly for CBH than for CNTs. In the case of EG-based composites, go…
Discontinuous FRP-Confinement of Masonry Columns
2020
Recent seismic events, all over the world, demonstrated that masonry constructions are prone to brittle collapses when shear or compression capacity is reached. It is clear that, in many real cases, masonry columns need to be strengthened for enhancing their load-carrying capacity and to develop a more ductile response. The Fiber Reinforced Polymers (FRPs) confinement of masonry columns is a well-known technique that may produce these advantages. Unfortunately, full-wrapping insulates the column from the environment; so interstitial humidity can easily occur and cause the acceleration of the masonry's decay. In order to prevent it, partial-confinement is commonly assessed instead of total-j…
Experimental analysis and micromechanical models of high performance renewable agave reinforced biocomposites
2017
Abstract The present work deals with the experimental study of high performance biocomposites reinforced with optimized agave fibers, as well as the successive implementation of reliable micromechanical models that can be used at the design stage. In detail, systematical experimental analyses performed on biocomposites with epoxy or PLA matrix, have permitted to highlight that for short fibers biocomposites the reinforcing leads to a significant improvement of the matrix stiffness, whereas the particular damage mechanism based essentially on the matrix failure with consequent tensile failure of the fibers aligned with the applied load, does not allow to obtain an actual reinforcing of the m…
A simplified predictive approach to assess the mechanical behavior of pinned hybrid composites aged in salt-fog environment
2020
Abstract Aim of this paper is to assess the predictive capabilities of a simplified theoretical approach on the failure load of aged pinned hybrid composites. In particular, the mechanical performances of glass-flax hybrid epoxy laminates exposed to salt spray fog environment, were used as input data in order to address the analytical model. Preliminarily, the relationship among mechanical performances, failure mechanisms, joint geometry and ageing time, was evaluated by double-lap joint tests on pinned samples at varying joint geometry and ageing time. The bearing and shear out limit stress of samples aged for 60 days under the salt-fog environment underwent a reduction of about 20% compar…
Effect of curing time on the performances of hybrid/mixed joints
2013
Abstract The aim of this work is the study of a mixed method used for the joining of aluminum alloys with glass reinforced polymer’s substrates (in the next GFRP). In particular, the technique of self-piercing riveting (in the next SPR) was applied on a co-cured joint in order to evaluate the influence of the time of inserting the rivet on the mechanical behavior of the mixed joints. Three different joints were realized: adhesive by co-curing technique, mechanical by self piercing riveting (in the next SPR) and a mixed one in which the joining techniques (i.e. adhesive and mechanical) were combined. In particular, to determine the optimum time to insert the rivet, three different times from…