Search results for "EXPA"

Structural behavior of the old masonry bridge in the Gulf of Castellammare

2016

Abstract Masonry arch bridges represent a very significant part of the heritage of road and railway artworks all over the word and especially in the Mediterranean area, both in terms of: numbers; reduced environmental impact; and static efficiency. In these cases, the cost of maintenance is often limited to the content and channeling of surface water and control of vegetation, which can eventually take root on the joints of the masonry at the shoulders. In masonry bridges, there are no expansion joints or hinges with support equipment or trolleys, as in metal bridges and reinforced concrete ones, or paint, or resin surface protection, all items that affect the cost of maintenance. The perma…

Material characteristics in the analysis of heated steel beams

1989

Beam fire tests are expensive and complicated. They may be replaced by calculations of the heated beam deflection by means of the method presented in this paper. The following material characteristics in the analysis of the deflection of beams during fire may be taken as fundamental: the steel creep characteristic at elevated temperatures, the modulus of elasticity and the coefficient of thermal expansion. According to the yield hinge theory, the yield stress is the criterion of failure of steel beams in fire. On the other hand, in the analysis of the deflection of the heated steel beams the influence of the yield stress is very small. The influence of the respective material characteristic…

Bubble formation at variously inclined nozzles

2014

Bubble formation at variously inclined submerged nozzles, fed with a continuous gas flow rate, is investigated. Results confirm previous findings, such as a substantial independence of bubble size of nozzle diameter and its dependence on the cubic root of gas flow rate at sufficiently high values of this parameter. Nozzle inclination in the range between 0 and 135° from the vertical upward orientation is found to have a negligible effect on bubble size. Observed bubble rise velocities lead to an estimation of the average liquid velocity induced by bubbles motion, leading in turn to a very simple correlation for the estimation of the liquid velocities induced by the repeated passage of bubbl…

The use of lightweight expanded clay aggregate (LECA) as sorbent for PAHs removal from water.

2012

Author's version of an article in the journal: Journal of Hazardous Materials. Also available from the publisher at: http://dx.doi.org/10.1016/j.jhazmat.2012.03.038 Lightweight expanded clay aggregate (LECA) has been explored as a sorbent for the removal of PAHs (phenanthrene, fluoranthene and pyrene) from water. The efficacy of LECA as a sorbent for PAHs was assessed using contact time, mass of sorbent and sorption isotherms in a series of batch experiments. Maximum (optimum) sorption was reached at 21 h after which the amount of PAHs sorbed remained almost constant. Batch experiments were conducted by shaking a 100 ml solution mixture of individual PAHs (containing 0.02 mg/L) with LECA. T…

Comparison of thermal expansion of wood and epoxy adhesives

2002

Epoxy-based adhesives are used both in the consolidation of decayed timbers and for new structural joints. Investigating the compatibility of wood and epoxy adhesives provides a better knowledge of the long-term behaviour of wood-epoxy joints. Besides mechanical compatibility, also temperature-related parameters are relevant in this context. The values of the thermal expansion coefficients (TEC) of two wood species (Spruce, Picea abies and Iroko, Clorophora excelsa) and four different epoxy resins have been compared using a modified test method that allows for nearly iso-hygric conditions of the wood specimens. Minor differences in TEC have been observed between wood in the transversal-to-t…

On the equation of state for thermal polymer solutions and melts with attractive interaction

1996

We perform Monte Carlo simulations of a lattice model for polymer melts, i. e., the bond fluctuation model in three dimensions. By using an energy parameter that prefers relatively long bonds, the model exhibits a glass transition at low temperatures, in close qualitative similarity to experiment. We modify this model by adding an attractive interaction of variable strength. We demonstrate that a small interaction strength has only a very small effect on the static properties of the melt. For a fixed strength of the potential, the chemical potential is measured by a modified particle-insertion method over a large range of temperatures and densities. The osmotic pressure is obtained by therm…

Gold nanoparticles/electrochemically expanded graphite composite: A bifunctional platform toward glucose sensing and SERS applications

2019

Abstract An integrated nanogold/expanded graphite based sensor was fabricated by a former electrochemical etching of the pencil lead electrode (PLE) and a later in-situ deposition of gold nanoparticles (AuNPs). The electrochemical pretreatment of PLE (EPLE) created a 3D graphene-like surface, enhanced the electrode surface area and facilitated the electron transfer ability within 5 min without any hazardous chemicals added. The obtained AuNPs/EPLE sensor had an excellent electrochemical response to glucose with a wide linear concentration range, from 0.05 to 38 mM and 38 to 60 mM, and a low detection limit of 5 μM (S/N = 3). Furthermore, the AuNPs/EPLE sensor was successfully employed to de…

An experimental study of dynamic behaviour of graphite polycarbonatediol polyurethane composites for protective coatings

2013

Segmented polycarbonatediol polyurethane (PUPH) has been synthesized and modified with different amounts of graphite conductive filler (from 0 to 50 wt%). Thermal and dynamical thermal analysis of the composites clearly indicates changes in the polyurethane relaxations upon addition of graphite. Broadband dielectric spectroscopy has been used to study the dielectric properties of the (PUPH) and one composite in the frequency range from 10−2 to 107 Hz and in the temperature window of −140 to 170 ◦C. Relaxation processes associated with different molecular motions and conductivity phenomena (Maxwell–Wagner–Sillars and electrode polarization) are discussed and related to the graphite content

Measurements of aerosol size distributions with a pocket counter with variable expansion ratio

2008

Expansion of private secondary education : lessons from recent experience in Tanzania

2000

International audience; The private sector's role in education has been the subject of much analysis and policy debate in recent years. In developing countries, public resources for education are limited and governments have traditionnally relied on private education, particularly at the post-basic levels, to meet the excess demand for education. Even when excess demand is not a major issue, advocates of private education note that private schools can be more efficient than their public sector counterparts, delivering more value in terms of student achievement per investment of resources. In this article we explore Tanzania's experience with private education during the early 1990s, a perio…