Search results for "Eddy"
showing 10 items of 129 documents
Biotrickling filter modeling for styrene abatement. Part 2: Simulating a two-phase partitioning bioreactor.
2017
Abstract A dynamic model describing styrene abatement was developed for a two-phase partitioning bioreactor operated as a biotrickling filter (TPPB-BTF). The model was built as a coupled set of two different systems of partial differential equations depending on whether an irrigation or a non-irrigation period was simulated. The maximum growth rate was previously calibrated from a conventional BTF treating styrene (Part 1). The model was extended to simulate the TPPB-BTF based on the hypothesis that the main change associated with the non-aqueous phase is the modification of the pollutant properties in the liquid phase. The three phases considered were gas, a water–silicone liquid mixture, …
Modelling bulk surface resistance by MODIS data and assessment of MOD16A2 evapotranspiration product in an irrigation district of Southern Italy
2016
Abstract In this study, accurate estimates of daily actual evapotranspiration, ET a , were obtained based on the direct Penman–Monteith application, in which the bulk surface resistance term was computed by considering, as main input, daily remotely sensed Land Surface Temperature (LST). In particular, Eddy Covariance measurements of ET a , associated to LST obtained by MODIS time series (MOD11A2) characterized by 8-day resolution, allowed to calibrate a simple bulk surface resistance model, based on two-years of data observations collected in a quite homogeneous irrigation district of Sicily, where olive grove is the main crop. The model was then validated by an independent database collec…
The FLUXCOM ensemble of global land-atmosphere energy fluxes
2019
Although a key driver of Earth’s climate system, global land-atmosphere energy fluxes are poorly constrained. Here we use machine learning to merge energy flux measurements from FLUXNET eddy covariance towers with remote sensing and meteorological data to estimate global gridded net radiation, latent and sensible heat and their uncertainties. The resulting FLUXCOM database comprises 147 products in two setups: (1) 0.0833° resolution using MODIS remote sensing data (RS) and (2) 0.5° resolution using remote sensing and meteorological data (RS + METEO). Within each setup we use a full factorial design across machine learning methods, forcing datasets and energy balance closure corrections. For…
Seismically induced, non-stationary hydrodynamic pressure in a dam-reservoir system
2003
Stochastic seismic analysis of hydrodynamic pressure in a dam-reservoir system is presented in this paper. The analysis is conducted assuming infinite reservoir compressible fluid and modeling seismic acceleration as a normal zero-mean stochastic process obtained by Penzien filter. The non-homogeneous boundary conditions associated to the problem have been incorporated into the equation of pressure wave scattering in the form of a forcing function turning the non-homogeneous boundary value problem into an homogeneous one. Solution obtained via modal analysis in time-domain is coupled with the use of classical Ito stochastic differential calculus to characterize the stochastic hydrodynamic p…
Optimal Flight Path Determination in Turbulent Air: A Modified EKF Approach
2017
By using the Extended Kalman Filter an accurate path following in turbulent air is performed. The procedure employs simultaneously two different EKFs: the first one estimates disturbances, the second one affords to determine the necessary controls displacements for rejecting those ones. To tune the EKFs an optimization algorithm has been designed to automatically determine Process Noise Covariance and Measurement Noise Covariance matrices. The first filter, by using instrumental measurements gathered in turbulent air, estimates wind components. The second one obtains command laws able to follow the desired flight path. To perform this task aerodynamic coefficients have been modified. Such a…
An EKF Based Method for Path Following in Turbulent Air
2017
An innovative use of the Extended Kalman Filter (EKF) is proposed to perform both accurate path following and adequate disturbance rejection in turbulent air. The tuned up procedure employs simultaneously two different EKF: the first one estimates gust disturbances, the second one estimates modified aircraft parameters. The first filter, by using measurements gathered in turbulent air, estimates both aircraft states and wind components. The second one, by using the estimated disturbances, obtains command laws that are able to reject disturbances. The predictor of the second EKF uses the estimated wind components to solve motion equations in turbulent air. Besides a set of unknown stability …
Effects of irregular two-dimensional and three-dimensional surface roughness in turbulent channel flows
2012
Abstract Wall-resolved Large Eddy Simulation of fully developed turbulent channel flows over two different rough surfaces is performed to investigate on the effects of irregular 2D and 3D roughness on the turbulence. The two geometries are obtained through the superimposition of sinusoidal functions having random amplitudes and different wave lengths. In the 2D configuration the irregular shape in the longitudinal direction is replicated in the transverse one, while in the 3D case the sinusoidal functions are generated both in streamwise and spanwise directions. Both channel walls are roughened in such a way as to obtain surfaces with statistically equivalent roughness height, but different…
Time-resolved velocity measurements in a magnetic micromixer
2015
Abstract Mixing efficiency is lower in passive micromixers due to viscous forces and substantial research effort is focused on designing high performance micromixers. Active micromixers make use of external forces to enhance mixing efficiency. Among these, magnetic forces are popular because they are non-contact and therefore the micromixer design can be kept simple. Laser-based diagnostic tools have great potential in providing multi-parameter information in microfluidics research on mixing. MicroPIV experiments are performed to investigate the transient flow field in a magnetic micromixer undergoing labyrinthine instability. Velocity and interface front information is extracted from a seq…
Numerical observations of turbulence structure modification in channel flow over 2D and 3D rough walls
2015
Abstract The effects of wall roughness on turbulence structure modifications were explored by numerical experiments, carried out using Large Eddy Simulation techniques. The wall geometry was made using an archetypal artificial method, thus to achieve irregular two- and three-dimensional shapes. The proposed roughness shapes are highly irregular and are characterised by high and small peaks, thus it can be considered a practical realistic roughness. Their effects are analysed comparing the turbulence quantities over smooth, 2D and 3D rough walls of fully developed channel flow at relatively low friction Reynolds number Re τ = 395 . Both transitional and fully rough regimes have been investig…
Eddy current imaging with an atomic radio-frequency magnetometer
2016
We use a radio-frequency $^{85}$Rb alkali-vapor cell magnetometer based on a paraffin-coated cell with long spin-coherence time and a small, low-inductance driving coil to create highly resolved conductivity maps of different objects. We resolve sub-mm features in conductive objects, we characterize the frequency response of our technique, and by operating at frequencies up to 250 kHz we are able to discriminate between differently conductive materials based on the induced response. The method is suited to cover a wide range of driving frequencies and can potentially be used for detecting non-metallic objects with low DC conductivity.