Search results for "Elastic Modulus"
showing 10 items of 189 documents
Ethylene-vinyl Acetate Thermoplastic Copolymers Filled with Multiwall Carbon Nanotubes: Effect of Hydrothermal Ageing on Mechanical, Thermal, and Ele…
2013
A range of properties of two commercial thermoplastic ethylene-vinyl acetate (EVA) copolymers, Elvax 420 and Elvax 450, neat and as melt-mixed composite filled with 15 wt.-% of multi-wall carbon nanotubes (MWCNTs), are studied in the “as produced” state and after hydrothermal ageing. Addition of MWCNTs into the neat copolymers introduces the functionality of electrical conductivity and significantly improves their mechanical properties, while thermal characteristics are slightly affected by the presence of carbon nanotubes. A remarkable increase of the elastic modulus (150%) and stress at failure (50%) in stress–strain experiments as well as creep resistance (40%) of the nanocomposites in c…
Structure and elastic properties of smectic liquid crystalline elastomer films
2001
Mechanical measurements, x-ray investigations, and optical microscopy are employed to characterize the interplay of chemical composition, network topology, and elastic response of smectic liquid crystalline elastomers (LCEs) in various mesophases. Macroscopically ordered elastomer films of submicrometer thicknesses were prepared by cross linking freely suspended smectic polymer films. The cross-linked material preserves the mesomorphism and phase transitions of the precursor polymer. The elastic response of the smectic LCE is entropic, and the corresponding elastic moduli are of the order of MPa. In the tilted ferroelectric smectic-C* phase, the network structure plays an important role. Du…
Characterization and Processability of Blends of Polylactide Acid with a New Biodegradable Medium-Chain-Length Polyhydroxyalkanoate
2015
In this work the processability and the mechanical performance of polylactide acid (PLA) based blends with a sample of a new biodegradable medium-chain-length poly (hydroxyalkanoate) (PHA) were investigated. The two polymers are incompatible with scarce adhesion and with the dispersed PHA particles size increasing with the PHA content. Rheological tests in shear flow indicate that adding PHA improves the processability of the matrix by increasing the content of this second component in the blend, as observed also for the torque curves, due to the very low viscosity of this new sample of PHA. The processability is only slightly worsened in non-isothermal elongational flow as the melt strengt…
Effect of the elongational flow on morphology and properties of polypropylene/graphene nanoplatelets nanocomposites
2018
Abstract In this work the effect of the presence of graphene nanoplatelets (GnP) on the morphology and mechanical properties of polypropylene/GnP nanocomposites has been investigated when these polymer systems are subjected to non-isothermal elongational flow in a melt spinning operation. The presence of the GnP magnifies the effect of the elongational flow. Indeed, the elastic modulus and the tensile strength of nanocomposites increases with the orientation more than that observed for the pure matrix. Moreover, the elongation at break increases at low values of the draw ratio for the nanocomposites, while, the matrix shows the expected decrease in deformability. These effects have been cor…
Mechanical, structural and magnetic properties of polypropylene/iron ferrite magnetic nanocomposites
2012
In this research, composites of polypropylene (PP) and a relatively small concentrations of iron ferrite (Fe3O4) nanopowder equal to 2, 5 and 10 wt.% have been made. An methacrylate monomer 2,2'-bis-(4-(2-methylprop-2-enoyloxy)phenyl)- propane (BAD) was added at a small amount (3 wt.%) to part of the composites during the thermoplastic mixing. The BAD has been used as a compatibilizing agent on the phase interaction between the filler and the matrix of polypropylene. It has been found that composites have adjustable mechanical, structural and magnetic properties dependent on the content of magnetic filler. Increase of concentration of ferrite particles affects a notable increase of elastic …
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer
2009
LDPE/PA-6 blends (75/25 wt/wt) were added with SEBS-g-MA (S) and/or an organoclay (20A) using different compounding sequences and the morphology and the properties of the blends or composites were investigated. An XRD study of the nanocomposites with pure polymers showed that 20A is intercalated by LDPE or PA-6 chains, whereas it is exfoliated by S if the clay concentration does not exceed 10 wt%. The SEM investigation showed that both S and 20A behave as efficient emulsifying agents for the LDPE/PA-6 blends. However, their effect on the mechanical properties was found to be opposite: S enhanced toughness but lowered the stiffness, whereas 20A improved the elastic modulus but impaired the i…
Mechanical properties of injection-molded binary blends of polyethylene with small additions of a liquid-crystalline polymer
2011
The results of the investigation of the mechanical properties of polyethylene (PE) blends with small (<3 wt %) additions of thermotropic liquid-crystalline polymers (LCPs) are reported. PE/LCP compositions with various LCP weight contents were obtained by thermoplastic mixing in a two-stage process. Short-term and long-term mechanical behavior of various PE/LCP compositions were analyzed. Data on the influence of LCP addition on the tensile elastic modulus [or Young's modulus (E)], stress at yield (σY), stress at break (σB), strain at yield, strain at break, and deformation at long-term (1000-h) tensile creep were obtained. The experimental results of the investigation show that even small …
Mechanical properties and XRD of Nafion modified by 2-hydroxyethylammonium ionic liquids
2013
In this work, the Nafion 112 membrane impregnated with 2-hydroxyethylammonium carboxylate ionic liquids have been investigated. The used ionic liquids were 2-hydroxyethylammonium formate [HEA]F, acetate [HEA]A and lactate [HEA]L. Prepared composite membranes Nafion/ionic liquid are characterized by mechanical testing, such as tensile test and creep test. It is found that ionic liquids decrease elastic modulus and creep compliance, but do not have significant effect on the tensile strength. Also, composite membranes were studied by wide angle X-ray diffraction. All ionic liquids shift the peak maximum to the lower angle. In this work, only biodegradable ionic liquids were used for composite …
The importance of fracture-healing on the deformation of fluid-filled layered systems
2014
International audience; Understanding the fracturingehealingerefracturing cycle is a fundamental part of studying the deformation dynamics and the permeability evolution of rock systems. Previous studies, however, have not examined the influence of healing i.e. fracture-closure through vein formation and the mechanical properties of the " healed " fractures (veins) on the rock deformation. We present results from a two-dimensional coupled hydro-mechanical model which simulates large time and spatial scale dynamic fracturing and healing of a porous medium under the influence of gravity, tectonic stretching and elevated fluid pressures. Our results show that healing decreases the local porosi…
Modular Small Diameter Vascular Grafts with Bioactive Functionalities.
2015
We report the fabrication of a novel type of artificial small diameter blood vessels, termed biomimetic tissue-engineered blood vessels (bTEBV), with a modular composition. They are composed of a hydrogel scaffold consisting of two negatively charged natural polymers, alginate and a modified chitosan, N,O-carboxymethyl chitosan (N,O-CMC). Into this biologically inert scaffold two biofunctionally active biopolymers are embedded, inorganic polyphosphate (polyP) and silica, as well as gelatin which exposes the cell recognition signal, Arg-Gly-Asp (RGD). These materials can be hardened by exposure to Ca(2+) through formation of Ca(2+) bridges between the polyanions, alginate, N,O-CMC, and polyP…