Search results for "Elastic"

Characterization of rubberized asphalt for railway sub-ballast. Improvements in the mix-design, performance features and rational methodology of HMA_…

2018

(STR) can be incorporated into asphalt mixtures in two different methods, which are referred to as the wet-dry process. The blending of recycled rubber (CRM) with asphalt has been used for years, and several manufacturing processes have been developed in Europe as well as in the USA. The use of a bituminous sub-ballast layer has been pointed out as an exciting alternative to the granular sub-ballast design traditionally applied in most railroad tracks. Frequently, unbound granular materials are replaced by bituminous sub-ballast that provide additional benefits to the subgrade protection. Much research has been conducted on finding other alternative material to be used as a modifier in asph…

CHARACTERIZATION OF RUBBERIZED ASPHALT FOR RAILWAY SUB-BALLASTS

Tesi di dottorato sotto la supervisione del professore Gaetano di Mino del Dipartimento di Ingegneria Civile di Palermo), come borsista Marie-Curie all'interno del progetto SUPRITN 2013/2017. Il mio lavoro e la linea della ricerca riguarda i conglomerati bituminosi con granulato di gomma per lo strato di sub-ballast nelle linee ferroviarie. L’attività di ricerca comprende il mix-design dell’asfalto con aggiunta di gomma, la caratterizzazione e le prestazioni per la ferrovia in termini di comportamento meccanico e lo smorzamento delle vibrazioni. In particolare con l’avvento dell’alta velocità, diversi studi hanno evidenziato ottime caratteristiche fisico-meccaniche per ciò che riguarda il c…

Definition of diagonal Poisson's ratio and elastic modulus for infill masonry walls

2014

The prediction of the response of infilled frames through the simplified approach of substituting the infill with an equivalent pin-jointed strut is treated. In this framework the results of an experimental study for the mechanical characterization of different types of masonry infills having the aim of estimating strength, Young modulus and Poisson's ratio are presented. Four types of masonry were investigated and subjected to ordinary compressive tests orthogonally to the mortar beds and along the directions of the mortar beds. The experimental campaign confirmed the possibility of using an orthotropic plate model for prediction of the Poisson's ratio and Young modulus along the diagonal …

Physical properties of green composites based on poly-lactic acid or Mater-Bi® filled with Posidonia Oceanica leaves

2018

Abstract This work focuses on the evaluation of Posidonia Oceanica leaves as effective reinforcing agent for ecofriendly, fully biodegradable polymer composites. Posidonia leaves were washed, ground and sieved in order to achieve two different size distributions and aspect ratios. They were then added to either a stiff or a ductile biodegradable polymer matrix, respectively poly-lactic acid (PLA) and MaterBi® (MB), at two different filler contents (10 wt% and 20 wt%). The materials were fully characterized from a spectroscopic, morphological, rheological, and mechanical point of view. In particular, the outcomes of tensile tests were statistically analyzed by using a Full Factorial Design i…

Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites

2019

Abstract The work proposes the combined use of a Modified Transverse Crack Tension (MTCT) test coupon and Infrared Thermography, to evaluate the static and fatigue behaviour of Fibre Reinforced Polymer composites under Mode II delamination. Artificial delaminations starters are added to the TCT coupon, whose effects on the Strain Energy Release Rate are discussed. Infrared Thermography and Thermoelastic Stress Analysis are implemented to investigate stresses and delaminations growths on two FRP materials: a pre-preg IM7/8552 carbon fibre-epoxy and a glass-fibre reinforced epoxy laminates. The thermographic, thermoelastic and second harmonic signals have been obtained and used to monitor the…

Thermoelastic Stress Analysis of modified Transverse Cut Tensile composite specimens under pure Mode II fatigue delamination

2018

The present work investigates the behaviour of a Transvers Crack Tensile (TCT) specimen undergoing fatigue loading, by means of a Thermoelastic Stress Analysis (TSA) experimental setup. The TCT is a tensile composite specimen where a number of internal layers are cut through the beam width. The presence of such transverse notch favours the formation of interlaminar Mode II delaminations, starting from the notch tips and propagating between the cut and continuous plies. In this work, a modification is adopted to the classic TCT specimen, where insert films, mimicking artificial delaminations, are laid across the notch tips. This is done with the purpose to favour a pure Mode II and a symmetr…

Screening Ferroelastic Transitions in Switchable Cyano-Bridged Perovskites: [CH3C(NH2)2]2[KM(CN)6], M = Cr3+, Fe3+, Co3+. Crystal Structure Character…

2019

Here we report the dynamics of organic cations as guest molecules in the novel perovskite host framework. The novel switchable crystals from the coordination family [CH3C(NH2)2]2[KB″(CN)6] were con...

Dynamic Tuning of Viscoelastic Hydrogels with Carbonyl Iron Microparticles Reveals the Rapid Response of Cells to Three-Dimensional Substrate Mechani…

2021

Current methods to dynamically tune three-dimensional hydrogel mechanics require specific chemistries and substrates that make modest, slow, and often irreversible changes to their mechanical properties, exclude the use of protein-based scaffolds, or alter hydrogel microstructure and pore size. Here, we rapidly and reversibly alter the mechanical properties of hydrogels consisting of extracellular matrix proteins and proteoglycans by adding carbonyl iron microparticles (MP) and applying external magnetic fields. This approach drastically alters hydrogel mechanics: rheology reveals that application of a 4,000 Oe magnetic field to a 5 mg/mL collagen hydrogel containing 10 wt% MPs increases th…

A new hyperelastic model for anisotropic hyperelastic materials with one fiber family

2016

International audience; The main goal of this study is to propose a practical application of a new family of transverse anisotropic invariants by designing a strain energy function (SEF) for incompressible fiber-reinforced materials. In order to validate the usability and creativeness of the proposed model, two different fiber-reinforced rubber materials under uniaxial and shear testing are considered. For each kind of material, numerical simulations based on the proposed model are consistent with experimental results and provide information about the effect of the new family of invariants in the construction of the SEF.

The effects of laboratory ageing on rheological and fracture characteristics of different rubberised bitumens

2018

Ageing of bituminous materials can result in loss of the durability of a flexible pavement. Using rubberised bitumens can enhance pavement performance while at the same time it solves a serious waste disposal problem. Combining Warm Mix Asphalt (WMA) additives with rubberised bitumens reduces the difficulties associated with the production of asphalt mixtures using this modified binder. This work was conducted to study the effect of ageing using fundamental parameters based on performance, i.e., CTOD and Glover-Rowe parameters have been related to pavement cracking. Different unmodified bitumens and rubberised bitumens were short-term aged using the Thin Film Oven Test (TFOT) and long- term…