Search results for "Electrical impedance"
showing 10 items of 183 documents
Magnetic Tunnel Junction (MTJ) Sensors for Integrated Circuits (IC) Electric Current Measurement
2013
We report on MgO Magnetic Tunnel Junction (MTJ) devices focusing on their potential application in the measurement of electrical current at the integrated circuit level. Single devices and full bridges have been specifically developed for this purpose. A sort of different designs regarding their geometry arrangement as well as the number of constitutive elements have been tested. Experimental characterization has been performed and results including impedance and sensitivity measurements are given.
A new backward/forward method for solving radial distribution networks with PV nodes
2008
Abstract In this paper, a new backward/forward (b/f) methodology for the analysis of distribution systems with constant power loads is presented. In the proposed method, at each iteration, the loads are considered as constant impedances; in the backward sweep all the network variables (bus voltages and branch currents) are evaluated considering a scaling factor which is determined at the end of the backward phase. Indeed the forward sweep is eliminated and the node voltages calculation does not demand the sequentiality needed in the b/f methodology. The developed method, although deriving conceptually from the b/f methodology, presents only the backward phase in which all the network variab…
Full-wave FDTD design and analysis of wideband microstrip-to-waveguide transitions
2003
Wideband transitions are designed and analysed by using two different approaches of the finite-difference time-domain (FDTD) method, in combination with the theory of nonuniform transmission lines. These transitions consist of a ridged waveguide-based taper between a shielded microstrip and a standard X-band rectangular waveguide. In the first step, a full-wave 2D-FDTD scheme is used to calculate the dispersion characteristics, as well as the geometry dependence of the impedance in the double ridged waveguide. Once these design curves have been obtained, the stepped transmission line transformer theory is used to design the tapers. In a former step, the nonuniform 3D-FDTD technique is appli…
A capacitor selector tool for on-board PDN designs in multigigabit applications
2011
This paper presents a capacitor selector software tool for a proper on-board Power Distribution Network (PDN) design in those high-speed applications which have strict requirements on voltage noise up to the first hundreds of megahertz. Current commercial tools for PDN design only offer a manual choice of the capacitor value and their number simulating the board impedance profile. This manual resolution becomes very hard when the design has high power consumption and noise requirements are very strict. The aim of this software is to solve a basic on-board PDN design minimizing the number of "change simulate-analyze" iterations that have to be carried out in the manual PDN design. This softw…
Impedance estimation of FEA's grid in fiji islands by V-I measurement by using the synchronous reference frame-PLL
2017
In recent years there has been a significant increase in distributed renewable energy generation feeding into the grid, with resulting detriment of the stability of the network, since present networks have not been designed for this purpose. To feed-in these renewable energy sources with minimum impact, it is essential to know a few grid parameters (voltage, current, grid impedance) at the point in which power supply is convenient. For this purpose in this paper an algorithm is proposed to obtain the estimated network impedance. This algorithm operates in time domain by a synchronous reference coordinate transformation, it requires only the measurement of the phase voltage with no-load and …
Control of solid-state fault current limiter for DG-integrated distribution systems
2017
Fault current limier (FCL) is a device that limits the system current under fault conditions without disconnecting the system and affecting the power system protection components such as circuit breakers. Many types of FCLs have been proposed to limit the magnitude of the fault current. Solid-state fault current limiters (SSFCLs) can limit the peak value of the fault current by applying several methods, such as controlling the system impedance or controlling the voltage that appears across the fault. In this paper, a new control scheme for the SSFCL circuit is presented. The control method is based on controlling the duty cycle of solid state switches to control the rms value of the system …
Design and Characterization of a New MV PLC Coupler for Smart Electric Energy Systems
2018
This paper deals with the design, modeling and characterization of a new coupling system for medium voltage (MV) narrow band power line communications (NB-PLC). It exploits the capacitive divider of voltage detecting systems (VDSs) normally used to reveal the mains voltage presence, thus avoiding the use of dedicated MV couplers. The proposed coupling system was patented by the authors. In this paper, the modeling of the VDS capacitive divider is presented, using a proper characterization method. Moreover, the interface card design is described, based on simulation of the whole PLC transmission channel. Laboratory tests are also presented and discussed. More in detail, a frequency response …
A method for the investigation of high-order two-frequency asynchronous oscillators
1992
A general method for analysing asynchronous high-order two-frequency oscillators is presented. the oscillator model is made up of a GC non-linear parallel group embedded in a linear lumped time-invariant network of any order. the approach devised rests on the identification of a pair of narrow-band impedance operators which permit one to derive first-approximation steady state and dynamic equations in the phasor domain—as well as stability criteria—in a simple and expressive manner. Previous results from averaging and perturbation treatments on fourth-order asynchronous oscillators are shown to be obtainable from this theory as particular cases. the sixth-order oscillator chosen as an appli…
Neighborhood built environment and socio-economic status in relation to multiple health outcomes in adolescents.
2017
Abstract The study aim was to examine associations of neighborhood built environment and neighborhood socio-economic status (SES) with multiple physical activity (PA) behaviors, sedentary time, and obesity indicators among adolescents. Cross-sectional study of 325 adolescents aged 14–18 years recruited from schools in Valencia, Spain. Participants' home neighborhoods were classified according to walkability and SES levels. Walkability was defined as an index of three built environment characteristics (i.e., residential density, land use mix, and street connectivity) based on geographic information system data. Moderate-vigorous PA (MVPA) and sedentary time were assessed using accelerometers…
Relation of body mass index and body fat mass for Spanish university students, taking into account leisure-time physical activity.
2009
The objective of this cross-sectional study was to analyze the relation of Body Mass Index with body fat mass while taking into account the amount of leisure-time physical activity for 299 male university students. Body fat mass was measured by bioelectrical impedance analysis. An estimation of energy expenditure in leisure-time physical activity in metabolic equivalents (METs) was obtained so participants were divided into six activity groups by percentile: no physical activity by the first group and participants physically active were divided into five groups by percentiles: <25%, 26–50%, 51–75%, 76–90%, and 91–100%. Correlations of Body Mass Index with body fat mass were strong in di…