Search results for "Electrode"
showing 10 items of 950 documents
Amorphous semiconductor-electrolyte junctions. Photoelectrochemical behaviour of thin Nb2O5anodic films
1987
An approach to the study of the photocharacteristics of amorphous semiconductor/electrolyte junctions is proposed which takes into account the main differences in the electronic structure and the transport properties of the amorphous semiconductors (a-SC) with respect to the crystalline counterparts. The influence of the wavelength of the incident light on the photocurrent vs electrode potential curves is explained on the basis of the geminate recombination theory in a-SC. The implications of the model are shortly discussed.
Photoelectrochemical study of passive films on stainless steel in neutral solutions
1991
Abstract Passive films formed on AISI 304 stainless steel in neutral solutions are studied using photoelectrochemical technique. Photocurrents were investigated as a function of the wavelength of the incident light, the electrode potential and the time. The results of the measurements together with capacity measurements indicate that the passive film on AISI 304 shows characteristics of a highly doped amorphous or highly disordered n-type semiconductor. The potential dependence of the optical gap values and of the photocurrent transients can be interpreted assuming that the passive film is an iron-chromium oxide solid solution.
ChemInform Abstract: Photoelectrochemical Characterization of Thin Anodic Oxide Films on Zirconium Metal.
2010
Abstract The effect of metal surface preparation on the properties of thin oxide films grown on zirconium in different electrolytes was investigated by photocurrent spectroscopy. Both passive layers grown by free corrosion of the samples in a solution and thin oxides grown anodically at a constant rate were investigated. The photoelectrochemical results give a complex picture of the interface, being influenced by the metal surface preparation, the solution pH and the electrode potential. A duplex structure of the films has been suggested on the basis of the photocurrent spectra, with an external hydrous layer (amorphous or strongly defective) having an optical gap ( E g 2 ~ 3 eV) lower resp…
Electro- and photo-electrooxidation of 2,4,5-trichlorophenoxiacetic acid (2,4,5-T) in aqueous media with PbO2, Sb-doped SnO2, BDD and TiO2-NTs anodes…
2020
Abstract In this work, the 2,4,5-T degradation in aqueous media was studied by electro- (EC) and photoelectrochemical (PEC) oxidation methods, which are two of the most important advanced oxidation processes (AOPs) for wastewater treatment. Both EC and PEC experiments were carried out in a single compartment cell under galvanostatic conditions (30 mA cm−2) at 298 K by using 0.05 M Na2SO4 + 200 ppm 2,4,5-T at pH 3 and pH 9, as model solutions. EC oxidation was performed using Sb-doped SnO2, PbO2 and boron doped diamond (BDD) as anodic materials. Besides these anodes, TiO2 in a nanotubular structure (TiO2 NTs) with or without PbO2 dispersed nanoparticles (TiO2::PbO2) were also used for PEC ox…
Electrochemical Growth and Physico-Chemical Characterization in Organic Medium of Nb2O5 Thin Films
2008
Investigations about the energetics and the electrical properties of niobium thin film, electrochemically grown, were performed in an organic solution of acetonitrile and lithium perchlorate. The study of the energetics of the Nb2O5/organic solution interface was performed by means of a non-destructive optical technique, photocurrent spectroscopy. By means of this technique, it was possible estimating the value of the flat band potential and locating conduction and valence band. A more cathodic value of flat band potential in respect with acidic solution was found in organic medium. From impedance spectra, the electrical circuit that gives best fitting values is constituted by two resistanc…
Light-Emitting Electrochemical Cells Using Cyanine Dyes as the Active Components
2013
Light-emitting electrochemical cells (LECs) based on cyanine molecules were prepared. High photoluminescence quantum yields were obtained for host-guest films using two cyanine dyes, reaching 27%. Sandwiching these films in between two electrodes allows for very stable near-infrared emission with a maximum radiant flux of 1.7 W m(-2) at an external quantum efficiency of 0.44%.
Dynamic doping in planar ionic transition metal complex-based light-emitting electrochemical cells
2013
Using a planar electrode geometry, the operational mechanism of iridium(III) ionic transition metal complex (iTMC)-based light-emitting electrochemical cells (LECs) is studied by a combination of fluorescence miscroscopy and scanning Kelvin probe microscopy (SKPM). Applying a bias to the LECs leads to the quenching of the photoluminescence (PL) in between the electrodes and to a sharp drop of the electrostatic potential in the middle of the device, far away from the contacts. The results shed light on the operational mechanism of iTMC-LECs and demonstrate that these devices work essentially the same as LECs based on conjugated polymers do, i.e., according to an electrochemical doping mechan…
Light-emitting diodes based on phenylenevinylene oligomers with defined chain lengths
1997
Abstract We present characteristic electroluminescence data on single-layer devices based on three different oligo phenylenevinylene compounds with defined chain lengths. Light-emitting diodes (LEDs) were prepared by subsequent vacuum evaporation of the oligomer film and the A1 top electrode onto an indium—tin oxide (ITO) substrate. The LEDs show light emission in the spectral range of yellow to orange depending on the conjugation length of the compound used. We report photoluminescence and optical absorption data of the thin sublimed films, together with the wavelength dependence of the electroluminescence and with the current—voltage characteristics of the LED devices. The redox behavior …
Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC
2020
Journal of Instrumentation 15(02), P02005 (2020). doi:10.1088/1748-0221/15/02/P02005
Thermometry by Arrays of Tunnel Junctions
1994
We show that arrays of tunnel junctions between normal metal electrodes exhibit features suitable for primary thermometry in an experimentally adjustable temperature range where thermal and charging effects compete. $I\ensuremath{-}V$ and $\frac{\mathrm{dI}}{\mathrm{dV}}$ vs $V$ have been calculated for two junctions including a universal analytic high temperature result. Experimentally the width of the conductance minimum in this regime scales with $T$ and $N$, the number of junctions, and its value (per junction) agrees with the calculated one to within 3% for large $N$. The height of this feature is inversely proportional to $T$.