Search results for "Electrode"

Electrochemical properties of graphite/nylon electrodes additively manufactured by laser powder bed fusion

2023

Nowadays, additive manufacturing, known as 3D printing, is vigorously employed at various enterprises due to the ability of industrial series production and customization in conjunction with geometry freedom. While, material design and fabrication of composite materials, meeting the desired architecture and properties, is another promising application of additive manufacturing. For instance, additive manufacturing of the material exhibiting electrochemical properties is beneficial for the development of freestanding electrodes that might be used in electrochemical energy storage systems. Herein, the graphite/nylon composite with a high carbon ratio of 30 wt% was produced by laser powder bed…

Nickel-Indium Sulphide Core-Shell Nanostructures Obtained by Spray-ILGAR Deposition

2013

Ni nanowires (NWs) of different lengths were fabricated by pulsed potentiostatic deposition within pores of polycarbonate membranes. After template dissolution, substrates underwent sequential Spray-ILGAR (R) depositions of thin indium sulphide films. The effect of deposition temperature was also investigated. For low number of deposition cycles, results showed complete and uniform covering of metal over the entire length of NWs, with formation of Ni - In2S3 core-shell structures. However, with increasing number of deposition cycles films became uneven and crusty, especially at higher temperatures, owing to the simultaneous formation of nickel sulfide. This drawback was almost eliminated do…

Nanostructured Pb electrode for innovative lead-acid battery

2017

Lead-acid batteries are widely used for energy storage, due to a well-established and reliable technology. Over the years, various studies for improving the performance of this battery have been performed. The main goal is to replace conventional plates with innovative electrodes having good stability, high capacity and high surface area. In particular, it is necessary to improve the kinetics of electrochemical conversion reactions at the electrode-solution interface, and to guarantee good electrical continuity during repeated charge/discharge cycles. To achieve these goals, the attention was focused on nanostructured electrodes. Up-to-date, two principal approaches have been followed. In t…

Electrodeposition and characterization of Mo oxide nanostructures

2015

Template electrodeposition has been used to grow uniform arrays of molybdenum oxide nanostructures in polycarbonate membrane. Several parameters have been investigated, like electrodeposition, time and solution pH. These parameters do not influence the nature of the deposit that always consists of mixed valence molybdenum oxides, whereas the nanostructure morphology changes with pH. In particular, at low pH (2.7), nanotubes are formed, whilst arrays of nanowires are obtained above pH 5.5. This change of morphology is likely due to H2 bubbles evolution during the electrochemical deposition, particularly occurring at low pH. It was found that fast removal of H2 bubbles through vigorous stirri…

Fabrication and characterization of nanostructured Ni and Pd electrodes for hydrogen evolution reaction (HER) in water-alkaline electrolyzer

2017

In the field of water-alkaline electrolyzer, the development of nanoporous low cost nickel electrodes is one of the potential approaches to increase electrocatalytic activity. Template electrodeposition is a facile and cheap technique for obtaining Ni nanowires (NWs) with high surface area. These nanostructures were fabricated by a two-step procedure. In the first step, a Ni compact layer was deposited on one side of the template where a gold film was previously sputtered, while, in the second-step, an ordered array of Ni-NWs was obtained by electrodeposition inside the template channels. The NWs were firmly connected to the underlying Ni layer, acting as a current collector. In order to en…

Direct electricity production from coconut oil - the electrooxidation of coconut oil in an acid electrolyte

2018

Supplying more and more energy is an essential task of today's energy industry. In the last few decades, in addition to traditional methods of energy production, alternative energy sources have been developing at a fast rate. One of the devices that can use these sources is the fuel cell (FC). FCs can be a power source of the future mainly due to their high efficiency, their low impact on the environment and the possibility of powering with different fuels. Most often, FCs are powered by hydrogen. However, issues with its cheap production and storage are the reasons for seeking new fuels for FCs. Yet it must be a fuel that will provide a zero or low emission level. One of these fuels can be…

Application of Ge Nanowire for Two-Input Bistable Nanoelectromechanical Switch

2013

Recently, several research groups presented bistable two-terminal nanoelectromechanical switches based on individual single-clamped active element. All presented devices had one input electrode. Similar devices having two or more input electrodes have not been yet investigated. In this work we present the two-input bistable controlled nanoelectromechanical switch based on an individual single-clamped Ge nanowire. The switch is realised using in-situ SEM technique and operating due to balancing of electrostatic, adhesion and elastic forces. The operation conditions of the device are investigated and presented. The advantages and drawbacks of the device are discussed. DOI: http://dx.doi.org/1…

Growth and Electrochemical Performance of Lead and Lead Oxide Nanowire Arrays as Electrodes for Lead-Acid Batteries

2013

n this work, we present the growth and electrochemical performance of nanostructured lead and lead oxide electrodes for lead-acid batteries. The electrodes were obtained by template electrodeposition in polycarbonate membranes, acting as template. Electrochemical tests were conducted at constant current in 5M aqueous solution of sulphuric acid, after assembling nanostructured lead and lead oxide electrodes in a zero-gap configuration using a commercially available separator. The main advantages of these electrodes are the high specific energy and power density, and the wide surface area, about 70 times higher than the geometrical one. These features allowed high discharge rates, up to 20C. …

Sn-Co Nanowires: High-Performing Electrodes as Anodes for Lithium-ion Batteries

2012

Chiral Magneto-Electrochemistry

2018

Magneto-electrochemistry (MEC) is a unique paradigm in science, where electrochemical experiments are carried out as a function of an applied magnetic field, creating a new horizon of potential scientific interest and technological applications. Over time, detailed understanding of this research domain was developed to identify and rationalize the possible effects exerted by a magnetic field on the various microscopic processes occurring in an electrochemical system. Notably, until a few years ago, the role of spin was not taken into account in the field of magneto-electrochemistry. Remarkably, recent experimental studies reveal that electron transmission through chiral molecules is spin se…