Search results for "Emitter"

Noise and gain performance of PSA transistor series for personal communication systems vs. emitter number and operating conditions

1995

The booming market of communication system applications in the low microwave range put greater demands on the component performance at lower supply voltages and limited current consumption, as well as on production cost and integration level. In this work, we present the results of an extensive characterization activity carried out on several advanced polysilicon bipolar transistors as requested by the manufacturer. The devices were grouped according to their emitter finger number and were characterized over the 2-6 GHz frequency range in terms of noise, gain and scatterino parameters at different bias conditions. A comparative analysis has been performed to explore how the transistor perfo…

Assessing a Local Losses Evaluation Procedure for Low-Pressure Lay-Flat Drip Laterals

2014

In the past, several research experiments have focused on the hydraulic characterization of traditional drip irrigation systems, and different design methodologies have been proposed with the aim of achieving very high emitter discharge uniformity (EU). The increasing use of low-pressure lay-flat drip laterals, characterized by a thin-walled polyethylene pipe, makes necessary a specific determination of their hydraulic properties, aimed to a correct design of such systems. Here, the validity of an empirical local losses estimation model was assessed for five different commercial lay-flat drip tapes. Moreover, the errors in the maximum lateral lengths obtained for a fixed emitter uniformity,…

Location Optimisation in the Process of Designing Infrastructure of Point Pollutant Emitters to Meet Specific Environmental Protection Standards

2022

This article addresses the challenge of searching for the optimal location for a newly designed pollutant emitter (new factory or other facility) in relation to the requirements imposed by environmental protection regulations on the concentrations of selected pollutants in a given area, taking into account the currently existing levels of analysed substances. The paper presents the key issues of the dispersion of pollutants in atmospheric air and pollutant dispersion models. The Gaussian model of a plume, based on the Pasquill diffusion equation, is chosen to simulate the dispersion of pollutants in atmospheric air. The key issue within the paper constitutes the research section responsible…

Obstructing propagation of interfering modes improves detection of guided waves in coated bone models

2014

Interference due to wave propagation in soft tissue that covers the bone is a major challenge to in vivo assessment of the fundamental flexural guided wave (FFGW) in bone. To improve signal-to-interference ratio (SIR) we propose to obstruct the propagation of interfering modes by locally deforming the coating by external mechanical compression. This approach was modeled by 2D finite-element transient domain (FEMTD) simulations in a fluid-coated (7 mm) solid plate (3 mm). The fluid layer mimics the soft tissue that covers the bone. A single emitter or a 6-element phased array excited ultrasound pulses at 50 kHz on the surface of the coating, and a receiver array was placed on the surface, 20…

QEC value of the superallowed β emitter 42Sc

2017

The QEC value of the superallowed β+ emitter Sc42 has been measured with the JYFLTRAP Penning-trap mass spectrometer at the University of Jyväskylä to be 6426.350(53) keV. This result is at least a factor of four more precise than all previous measurements, which were also inconsistent with one another. As a byproduct we determine the excitation energy of the 7+ isomeric state in Sc42 to be 616.762(46) keV, which deviates by 8σ from the previous measurement. peerReviewed

Experimental Investigation for Local Tank Inflow Model

2014

In the present paper the effect of private roof tanks and of the float valve characteristics on apparent losses due to water meter errors was investigated via an experimental study. The tests were carried out at the Environmental Hydraulic Laboratory of the University of Enna (Italy), on a high-density polyethylene (HDPE 100 PN16) looped distribution network. The experimental results showed that network pressure plays an important role in the characterisation of the floating ball valve emitter law, but the tank operating condition is the most relevant aspect to be considered mainly for water meter error evaluation. (C) 2014 The Authors. Published by Elsevier Ltd.

Production and Radiochemical Separation of the Auger Electron Emitter140Nd

2000

Among the Auger electron emitters, the radiolanthanide 140Nd has some unique nuclear properties with potential for endoradiotherapeutic applications. In the present study, 140Nd was produced via the 140Ce(3He,3n) nuclear process at the FZ Julich CV28 cyclotron, irradiating CeO2 with 3He particles of 36 MeV primary energy. Yields of about 5 MBq 140Nd per microAh were experimentally obtained. Batch yields of > 100 MBq 140Nd were reached. 140Nd was separated in 75 +/- 5% radiochemical yield using a two-step process, first by extracting the bulk of the target material according to a Ce(IV)/Nd(III) separation, then by final ion exchange purification.

68Ga-BPAMD: PET-imaging of bone metastases with a generator based positron emitter

2012

Abstract Purpose Bone metastases are a serious aggravation for patients suffering from cancer. Therefore, early recognition of bone metastases is of great interest for further treatment of patients. Bisphosphonates are widely used for scintigraphy of bone lesions with 99m Tc. Using the 68 Ge/ 68 Ga generator together with a macroyclic bisphosphonate a comparable PET-tracer comes into focus. Procedures The bisphosphonate DOTA-conjugated ligand BPAMD was labelled with 68 Ga. [ 68 Ga]BPAMD was evaluated in vitro concerning binding to hydroxyapatite and stability. The tracer's in vivo accumulation was determined on healthy rats and bone metastases bearing animals by μ-PET. Results BPAMD was lab…

Modulating the polarization of broadband terahertz pulses from a spintronic emitter at rates up to 10 kHz

2021

Reliable modulation of terahertz electromagnetic waveforms is important for many applications. Here, we rapidly modulate the direction of the electric field of linearly polarized terahertz electromagnetic pulses with 1–30 THz bandwidth by applying time-dependent magnetic fields to a spintronic terahertz emitter. Polarity modulation of the terahertz field with more than 99% contrast at a rate of 10 kHz is achieved using a harmonic magnetic field. By adding a static magnetic field, we modulate the direction of the terahertz field between angles of, for instance, −53° and 53° at kilohertz rates. We believe our approach makes spintronic terahertz emitters a promising source for low-noise modula…

2016

Two light-emitting polyphenylene dendrimers with both hole and electron transporting moieties were synthesized and characterized. Both molecules exhibited pure blue emission solely from the pyrene core and efficient surface-to-core energy transfers when characterized in a nonpolar environment. In particular, the carbazole- and oxadiazole-functionalized dendrimer (D1) manifested a pure blue emission from the pyrene core without showing intramolecular charge transfer (ICT) in environments with increasing polarity. On the other hand, the triphenylamine- and oxadiazole-functionalized one (D2) displayed notable ICT with dual emission from both the core and an ICT state in highly polar solvents. …