Search results for "Energy Storage"
showing 10 items of 235 documents
The quality factor of a superconducting rf resonator in a magnetic field.
2010
The quality factor of a superconducting NbTi resonator at 1.6 MHz in a magnetic field up to 1.2 T as well as its temperature dependence is investigated. A hysteresis effect in the superconducting surface resistance as a function of the magnetic field is observed. An unloaded Q-value of the resonator of 40,500 is achieved at 3.9 K. It is shown that this Q-value is limited by dielectric losses in the FORMVAR insulation of the coils wire. The details of the Q-value optimization are discussed. In the temperature dependence of the Q-value a steep decrease is observed above T approximately = 7.5 K. Finally, the implications of these measurements for real trap experiments are discussed in detail.
New frontiers in sustainable energy production and storage
2015
Evidently, one of the most effective ways to reduce CO2 emissions consists in the deployment of renewable energies, with the advantage of securing and expanding the energy supplies of a given country. The main problem that arises is due to the intermittent temporary character of many renewable resources like solar and wind. For this reason, it has been recently concluded that in case of high integration of renewables into the distribution grid (more than about 30% of the electricity mix), the implementation of energy storage systems together with smart grids is necessary. Therefore, renewable energies for large scale power production in country would usually require the availability of a su…
Energy consumption model of aerial urban logistic infrastructures
2021
In the last decade, logistic systems based on small aerial vehicles (drones) have become attractive for urban delivery operations as a sustainable alternative to ground vehicles because they are not affected by the congestion of the road network, thus allowing for faster and more reliable services. Aerial logistic systems, however, require a substantially different approach to operations management and need specifically designed supportive infrastructures. While the research on urban aerial delivery mostly focuses on the optimization vehicle operations, the appropriate design of supportive infrastructures is seldom considered. This paper focuses on the energy efficiency of aerial logistic s…
Shedding Light on Graphene Quantum Dots: Key Synthetic Strategies, Characterization Tools, and Cutting-Edge Applications
2021
During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the…
Master-Slave Control of Battery/Supercapacitor Based Hybrid Energy Storage System for E-Vehicle Application
2022
In this paper, management and control problem of hybrid energy storage system (HESS) has been solved by master-slave control strategy. Heuristic fuzzy rules based algorithm is developed for optimal power sharing between different power sources. The master control is followed by a slave level controller, designed by using terminal synergetic control method for tracking. Moreover, the stability analysis of closed-loop system has been carried out by using lyapunov theory. Finally, the proposed method has been tested in MATLAB/Simulink environment under Worldwide Harmonised Light Vehicle Test Procedure (WLTP).
Status of EU DEMO heat transport and power conversion systems
2018
Abstract DEMO in Europe is considered to be the nearest-term reactor design to follow ITER and capable of demonstrating production of electricity, operating with a closed fuel-cycle and to be a facilitating machine between ITER and a commercial reactor. The aim of this paper is to show the design progress of the complex system’s “chain” devoted to the extraction of the plasma generated pulsed thermal power and its conversion into electricity delivered to the grid, including the Primary Heat Transport System (PHTS), the Power Conversion System (PCS) and the Intermediate Heat Transport System (IHTS) – provided by an Energy Storage System (ESS) – in between PHTS and PCS, which is introduced fo…
Load Demand Analysis of Nordic Rural Area with Holiday Resorts for Network Capacity Planning
2019
Most of the Nordic holiday resorts are in rural area with low capacity distributed network. The rural area network is weak and needs capacity expansion planning as the load demand of this area are going to increase due to penetration of electric vehicles and heat pumps. Such type of rural network can also be operated as a micro-grid, and therefore load analysis is required for appropriate operation. The load analysis will also be useful for finding proper sizing of distributed energy resources including energy storage. In this work, load demand analysis of a typical Nordic holiday resorts, connected in rural grid, is presented to find out the load variation during the usage periods. The loa…
Wireless Power Transfer for Electric Vehicles: System Design Approach and Energy Storage Characterization
2023
This thesis is the result of the research work carried out as part of the PhD course in Energy and Information Technology between November 2019 and January 2023 at the University of Palermo jointly with the University of Lisbon. The research project has been focused on wireless charging systems for electric vehicles. A wide-ranging analysis was conducted on the topic, with a particular focus on the design aspects of these systems. This thesis, a summary of the work carried out over the previous three years, is organized into two parts, identifying the macro research activities into which the project was been divided. The first part is focused on the design approach of the Wireless Power Tra…
Innovative Compact Solar Air Conditioner based on Fixed and Cooled Adsorption Beds and Wet Heat Exchangers
2014
Abstract In this work, a new all-in-one compact solar air conditioner concept is presented. The system is mainly based on a new DEC process which utilises fixed and cooled adsorption beds operating in a batch process and two wet heat exchangers. The proposed innovative adsorption bed is a fin and tube heat exchanger commonly used in the air conditioning sector, wherein the spaces between the fins are filled with silica gel grains. The main feature of this component is to allow simultaneous dehumidification and cooling of air. Furthermore, since the component hosts a considerable amount of adsorption material, solar energy can be efficiently stored in the desiccant media in terms of accumula…
A Permanent Magnet Linear Generator for the Enhancement of the Reliability of a Wave Energy Conversion System
2019
In this paper, a linear generator for a highly reliable Wave Energy Conversion system is designed and tested. In order to store energy, the system is able to produce hydrogen The Wave Energy Conversion System consists of an electrical linear generator, a power conversion system and a sea-water electrolyzer. A small scale prototype of the system has been designed and built. The design is oriented to the enhancement of the system robustness and reliability and a Failure Mode and Effects and Criticality Analysis (FMECA) has been used. In order to guarantee an easy extension of the power capability of the marine plant, a modular architecture of the system has been adopted. The design strategy i…