Search results for "Energy source"

showing 10 items of 615 documents

Environmental assessment of 2030 electricity generation scenarios in Sicily: An integrated approach

2020

Abstract This paper deals with the environmental assessment of two electricity scenarios in Sicily, for 2030, characterized by a high exploitation of renewable energy sources in order to quantify the potential contribution of the local strategies in the achievement of the European climate policies and the potential improvement in the future electricity mix, compared to the current one (2014). In order to match these goals, authors integrate the Life Cycle Assessment with a scenario analysis. The future electricity mix scenarios, characterized by a share of renewables (57% for 2030-BS scenario and 51% for 2030-DS scenario) show a reduction of the greenhouse gases emissions per kWh of electri…

Settore ING-IND/11 - Fisica Tecnica Ambientale060102 archaeologyRenewable Energy Sustainability and the Environmentbusiness.industry020209 energy06 humanities and the arts02 engineering and technologyEnvironmental economicsEnergy policyRenewable energyElectricity generationGreenhouse gas0202 electrical engineering electronic engineering information engineeringEnvironmental science0601 history and archaeologyEnvironmental impact assessmentScenario analysisElectricitybusinessLife-cycle assessmentElectricity scenarios Energy policy Renewable energy sources Life cycle assessment Environmental sustainability Marginal electricity generation technologies
researchProduct

Life-Cycle Assessment Applied to Future Scenarios of Electricity Generation in Sicily

2018

Fighting global warming and increasing the energy security are some of the most relevant objectives of the European energy policy. Thus, defining potential low carbon pathways for the energy sector is of paramount importance in order to identify strategies with the lowest impact on climate. This paper presents an overview of environmental assessment of future electricity scenarios in Sicily (Italy), for 2020 and 2030, characterized by a high exploitation of renewable energy sources. Authors apply the Life Cycle Assessment methodology, according to the standard of the ISO 14040 series, in order to evaluate the environmental impacts of electricity generation in the future scenarios in compari…

Settore ING-IND/11 - Fisica Tecnica AmbientaleElectricity scenarios energy policy renewable energy sources life cycle assessment environmental sustainability marginal technologies
researchProduct

Electrical Power from seawave energy

2010

Current energy crisis and general concerns on environmental issues have triggered an ever increasing effort on harvesting renewable energies. Amongst renewable energy sources, sea wave energy is definitely the one that has been less utilised. This is probably caused by three reasons: i) the low energy concentration in the sea waves, at least in the sites where it is technically possible to install conversion stations: ii) the strong technical novelties that are required to extract the energy that is contained in a highly and stochastically variable motion; iii) the difficulty to find a suitable electrical system able to convert the energy contained in the motion of the sea into electrical e…

Settore ING-IND/11 - Fisica Tecnica AmbientaleSeawave energy renewable energy sourceSettore ING-IND/32 - Convertitori Macchine E Azionamenti Elettrici
researchProduct

Insulating Building Components Made from a Mixture of Waste and Vegetal Materials: Thermal Characterization of Nine New Products

2021

Nowadays, energy efficiency and sustainability are the fulcra of building policies. These policies promote the use of new technologies and materials that can reduce the primary energy involved and the environmental costs of construction, guarantying at the same time a high level of comfort for the building’s occupants. Synergy between previous construction techniques and the use of new materials should be pursued by employing materials with a low environmental impact and optimal thermal insulation properties. Within this framework, new materials derived from the agriculture sector, and waste or recycling products from the industrial/agricultural sectors have been studied. The aim of this pa…

Settore ING-IND/11 - Fisica Tecnica AmbientaleThermal conductivity measurementEnvironmental effects of industries and plantsRenewable Energy Sustainability and the EnvironmentGeography Planning and DevelopmentTJ807-830vegetal materialManagement Monitoring Policy and LawTD194-195thermal conductivity measurements; building envelope sustainability; waste material; vegetal material; environmentally friendly compositesRenewable energy sourceswaste materialEnvironmental sciencesbuilding envelope sustainabilitythermal conductivity measurementsGE1-350environmentally friendly compositesSustainability; Volume 13; Issue 24; Pages: 13820
researchProduct

Introduction of Offshore Wave, Wind and Solar Energies in Vietnam

2020

In Vietnam, the energy demand shows an ever-increasing trend. To limit the utilization of fossil fuels and the following consequences for the environment, renewable energy sources must be adopted. In this context, the paper assesses the utilization of offshore wind and sea wave, by considering a commercial wind turbine and a prototypical wave energy converter. Solar energy can be optionally also collected by this device. An algorithm is introduced to find the best composition of the three sources able to cover a desired share of energy demand. The approach is applied to Ca Mau, a province in the southern part of Vietnam. Finally, the results encourage the adoption of these energy sources th…

Settore ING-IND/11 - Fisica Tecnica AmbientaleWind powerLCOEMeteorologybusiness.industryEnergy mixFossil fuelContext (language use)Solar energyTurbineRenewable energySettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaOffshore wind poweroffshore wind energyEnvironmental scienceoffshore solar energybusinessEnergy sourcesea waveGlobal Oceans 2020: Singapore – U.S. Gulf Coast
researchProduct

The interaction between intermittent renewable energy and the electricity, heating and transport sectors

2012

In a global perspective, it is essential that the world transfers from fossil fuels to renewable energy sources in order to minimise climate change effects. As a part of such transition energy savings are also important, as they can decrease production costs effectively. The nature of such a change is that it has to be implemented on a local level. Energy saving technologies are placed with the demand decrease and renewable energy is typically distributed where the resources are. In some parts of the world, energy savings have resulted in a stabilisation of the energy demands, however in the world as such, demands are still increasing in buildings, transport and industry. Although the deman…

Settore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryNatural resource economicsMechanical EngineeringEnvironmental impact of the energy industryBuilding and Constructionsustainable development energy efficient vehicles renewable energy systems district heating energy saving.PollutionEnergy engineeringIndustrial and Manufacturing EngineeringRenewable energyMicroeconomicsGeneral EnergyRenewable energy creditEnergy developmentrenewable energy; electricity; heating; transport sectorsEnergy intensityIntermittent energy sourceEconomicsElectrical and Electronic EngineeringbusinessFeed-in tariffCivil and Structural Engineering
researchProduct

Urban Energy Hubs Economic Optimization and Environmental Comparison in Italy and Vietnam

2018

This paper aims to perform the minimization of the yearly energy supply cost from the main electricity and natural gas grids related to an energy district, considering the installation of different equipments. The case study refers to energy consumption of a medium density urban district and involves the exploitation of different energy sources and devices (photovoltaic systems, electrical energy storage, heat pumps and cogenerators). The analysis of the district energy supply is accomplished through an energy hub model. After a cost analysis related to the considered energy systems, a MILP algorithm was used for the optimization of a cost function and the simulation of various scenarios. M…

Settore ING-IND/11 - Fisica Tecnica Ambientalebusiness.industryPhotovoltaic systemContext (language use)Energy consumptionEnvironmental economicsSettore ING-IND/33 - Sistemi Elettrici Per L'EnergiaResistance heating Mathematical model Optimization Heat pumps Economics Natural gas Photovoltaic systemsNatural gasEnvironmental scienceEnergy supplyElectricityEnergy sourcebusinessEnergy (signal processing)
researchProduct

State of art and economic evaluation of wave energy converters. A case study

2022

The even increasing energy demand in the world is a relevant problem for the modern society. The energy supply from fossil fuels has become a critical aspect due to the progressive reduction of reserves and political instability among the Countries. For these reasons, the exploitation of renewable energy sources is looked with a great interest. In this context, solar, wind, geothermal, hydropower, and biomass can be successfully used through commercial technologies. Other potential renewable energy sources could have potential applications in the next future. Among these, sea wave is considered a very promising energy source, especially for small islands. In this context, the paper propones…

Settore ING-IND/11 - Fisica Tecnica Ambientalewave energy converter renewable energy sources economic approach sea waveSettore ING-IND/32 - Convertitori Macchine E Azionamenti ElettriciOCEANS 2022, Hampton Roads
researchProduct

Graphite-supported TiO2 for 4-nitrophenol degradation in a photoelectrocatalytic reactor

2009

WOS: 000274769500044

Settore ING-IND/24 - Principi Di Ingegneria ChimicaAnataseMaterials scienceAqueous solutionScanning electron microscopePhotoelectrocatalytic degradation photoelectrocatalytic reactor graphite supported TiO2 4-nitropheol oxidationGeneral Chemical EngineeringContinuous reactorAnalytical chemistryGraphite-Supported Tio2General Chemistry4 Nitrophenol OxidationIndustrial and Manufacturing EngineeringAmorphous solidPhotoelectrocatalytic ReactorElectrodeEnvironmental ChemistrySettore CHIM/07 - Fondamenti Chimici Delle TecnologieGraphiteEnergy sourcePhotoeletrocatalytic DegradationChemical Engineering Journal
researchProduct

Adaptive type-2 fuzzy control of non-linear systems

2009

The paper describes the development of two different type-2 adaptive fuzzy logic controllers and their use for the control of a non linear system that is characterized by the presence of bifurcations and parameter uncertainty. Although a type-2 fuzzy logic controller is able to handle the non linearities and the uncertainties present in a system, its robustness and effectiveness can be increased by the use of an opportune adaptive algorithm. A simulation study was conducted to compare the behavior of adaptive controllers with that of simple type-1 and type-2 fuzzy logic controllers. The system to be controlled, used for the simulation, is a continuous bioreactor for the treatment of mixed w…

Settore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciAdaptive neuro fuzzy inference systemAdaptive controlAdaptive algorithmUncertaintyFuzzy control systemFuzzy logicType-2 fuzzy logic controlControl theoryNon linear systems Adaptive control.Control systemRobust controlEnergy sourceMathematics2009 IEEE International Conference on Intelligent Computing and Intelligent Systems
researchProduct