Search results for "Environmental Biotechnology"
showing 10 items of 568 documents
Electrical conductivity as a state indicator for the start-up period of anaerobic fixed-bed reactors.
2016
The aim of this work was to analyse the applicability of electrical conductivity sensors for on-line monitoring the start-up period of an anaerobic fixed-bed reactor. The evolution of bicarbonate concentration and methane production rate was analysed. Strong linear relationships between electrical conductivity and both bicarbonate concentration and methane production rate were observed. On-line estimations of the studied parameters were carried out in a new start-up period by applying simple linear regression models, which resulted in a good concordance between both observed and predicted values. Electrical conductivity sensors were therefore identified as an interesting method for monitori…
Source shape and data analysis procedure effects on hydraulic conductivity of a sandy-loam soil determined by ponding infiltration runs
2017
Performing ponding infiltration runs with non-circular sources could represent a good means to sample completely an area of interest. Regardless of the shape of the source, predicting the expected reliability of the collected data by infiltrometers should facilitate soil hydraulic characterisation and also allow a more conscious use of the field data. The influence of the shape of the infiltration source (i.e., circular or square) and the analysis procedure of the steady-state infiltration data on the saturated hydraulic conductivity, Ks, of a sandy-loam soil was tested in this investigation. Circular and square surfaces sampled with the pressure infiltrometer (PI) yielded similar estimates…
Convective hydration in the tropical tropopause layer during the StratoClim aircraft campaign: pathway of an observed hydration patch
2018
The source and pathway of the hydration patch in the TTL (tropical tropopause layer) that was measured during the Stratospheric and upper tropospheric processes for better climate predictions (StratoClim) field campaign during the Asian summer monsoon in 2017 and its connection to convective overshoots are investigated. During flight no. 7, two remarkable layers are measured in the TTL, namely (1) the moist layer (ML) with a water vapour content of 4.8–5.7 ppmv in altitudes of 18–19 km in the lower stratosphere and (2) the ice layer (IL) with ice content up to 1.9 eq. ppmv (equivalent parts per million by volume) in altitudes of 17–18 km in the upper tropo…
Development and pilot-scale validation of a fuzzy-logic control system for optimization of methane production in fixed-bed reactors
2018
International audience; The objective of this study was to develop an advanced control system for optimizing the performance of fixed-bed anaerobic reactors. The controller aimed at maximizing the bio-methane production whilst controlling the volatile fatty acids content in the effluent. For this purpose, a fuzzy-logic controller was developed, tuned and validated in an anaerobic fixed-bed reactor at pilot scale (350 L) treating raw winery wastewater. The results showed that the controller was able to adequately optimize the process performance, maximizing the methane production in terms of methane flow rate, resulting in an average methane yield of about 0.29 LCH4 g−1 COD. On the other han…
Biochemical methane potential (BMP) of solid organic substrates: evaluation of anaerobic biodegradability using data from an international interlabor…
2011
Background: This paper describes results obtained for different participating research groups in an interlaboratory study related to biochemical methane potential (BMP). In this research work, all experimental conditions influencing the test such as inoculum, substrate characteristics and experimental conditions were investigated. The study was performed using four substrates: three positive control substrates (starch, cellulose and gelatine), and one raw biomass material (mung bean) at two different inoculum to substrate ratios (ISR). Results: The average methane yields for starch, cellulose, gelatine and mung bean at ISR of 2 and 1 were 350 ± 33, 350 ± 29, 380 ± 42, 370 ± 36 and 370 ± 35 …
Assessing the efficiency of Chilean water and sewerage companies accounting for uncertainty
2016
Abstract Efficiency assessment of water and sewerage companies (WaSCs) has attracted considerable attention both for water company managers and water regulators. Within the methodological approaches that can be applied to estimate efficiency scores, data envelopment analysis (DEA) is the most widely applied technique. In spite of the positive features of DEA, it presents a major drawback which is its deterministic nature. In other words, conventional DEA models do not account for uncertainty in the data. To overcome this limitation, we assess, for the first time, the efficiency of a sample of Chilean WaSCs by using a DEA model with statistical tolerance in the data. Hence, 81 efficiency sco…
Modelling of Water Supply Costs
2017
Water supply tariffs setting is a labour intensive regulatory procedure; currently number of informative and procedural shortages and problems exist. The aim of the current research is improvement of methodology for determination of the substantiated costs for provision of water services. A working hypothesis was advanced to modernize the methodology: the specific costs (/m3) required for the provision of water services in a specific region is a variable multi-parameter function of key performance indicators. There is preferred a benchmark modelling procedure, which is based on the factual cases (declared indicators of water utilities) and synthesis of the general regularity. The model is d…
Real Time Assessment of Potable Water Quality in Distribution Network based on Low Cost Multi-Sensor Array
2018
New concepts and techniques are replacing traditional methods of water quality parameters measurement systems. This paper proposed a new way of potable water quality assessment in distribution network using Multi Sensor Array (MSA). Extensive research suggests that following parameters i.e. pH, Dissolved Oxygen (D.O.), Conductivity, Oxygen Reduction Potential (ORP), Temperature and Salinity are most suitable to detect overall quality of potable water. Commonly MSA is not an integrated sensor array on some substrate, but rather comprises a set of individual sensors measuring simultaneously different water parameters all together. Based on research, a MSA has been developed followed by signal…
Improving drinking water treatment without tariff impact: the Spanish case study
2017
Abstract Water is essential for our lives and activities. Everyone can drink good quality water, the question is whether they have access to it in the first place. Water quality and its treatment depend on the water source. This treatment has costs that users have to pay in the water tariff. It is very important to establish a water tariff that permits the best water treatment and has a low impact on the users. Cost functions are a useful tool to predict costs before an implementation or improvement. This article, using three easy steps (analysis, obtaining costs and modification of the water tariff) proposes improving water purification treatment using cost functions in order to find the b…
Effect of the junction angle on turbulent flow at a hydraulic confluence
2018
Despite the existing knowledge concerning the hydrodynamic processes at river junctions, there is still a lack of information regarding the particular case of low width and discharge ratios, which are the typical conditions of mountain river confluences. Aiming at filling this gap, laboratory and numerical experiments were conducted, comparing the results with literature findings. Ten different confluences from 45 ∘ to 90 ∘ were simulated to study the effects of the junction angle on the flow structure, using a numerical code that solves the 3D Reynolds Averaged Navier-Stokes (RANS) equations with the k- ϵ turbulence closure model. The results showed that the higher the junction angle, the …