Search results for "Evaporator"
showing 10 items of 12 documents
Performance maps for an air-cooled air conditioning system as a preliminary instrument for the diagnosis of evaporator fouling
2019
Abstract During the past few decades, there has been increased interest in the development of automated approaches for detecting and diagnosing faults in air conditioning systems. Among them, thermoeconomic diagnosis is a technique which involves the use of exergy analysis. As a first step towards improving its performance, this work is focused on the thermodynamic and exergy analysis of a direct expansion air conditioning system used in small commercial building applications. The analysis was carried out by means of experimental activities on a 17.5 kW rooftop unit installed at the Herrick Laboratories, Purdue University, Indiana (USA). The system under investigation was equipped with a va…
Getting insights into the behavior of variable speed direct expansion air conditioning systems under faulty operating conditions
2019
Direct expansion air conditioning systems, such as rooftop units, are widely adopted in small and medium scale commercial buildings. In order to increase the energy performance of these systems during part-load operation, variable-speed compressors and fans have been adopted in the last two decades. However, profitable energy saving could be achieved not only by optimizing the design and the control of these systems, but also by scheduling a proper maintenance strategy. In fact, if not properly maintained, no benefits would be achieved even when more sophisticated systems are adopted. In order to support plant owners in scheduling cost-effective maintenance program, Fault Detection and Diag…
On the reliability of thermoeconomic diagnosis of fouled evaporators: assessing the influence of geometries, operating conditions and reference state
2015
Thermoeconomic diagnosis of refrigeration systems is a pioneeristic approach, which has been proven to achieve good performances (under favorable conditions) for the detection of specific faults such as condenser and evaporator fouling and compressor valve leakage. In this paper the sensitivity of performance in detecting fouled Direct Expansion (DX) coils is investigated; the examined parameters are the temperature and relative humidity of coil inlet air and the sensible/latent heat ratio of the coil (varied by considering different numbers of rows). As the thermoeconomic model requires splitting the specific exergy of cooling air into “mechanical”, “thermal” and “chemical” fractions, and …
Assessing the Robustness of Thermoeconomic Diagnosis of Fouled Evaporators: Sensitivity Analysis of the Exergetic Performance of Direct Expansion Coi…
2016
Thermoeconomic diagnosis of refrigeration systems is a pioneering approach to the diagnosis of malfunctions, which has been recently proven to achieve good performances for the detection of specific faults. Being an exergy-based diagnostic technique, its performance is influenced by the trends of exergy functions in the “design” and “abnormal” conditions. In this paper the sensitivity of performance of thermoeconomic diagnosis in detecting a fouled direct expansion coil and quantifying the additional consumption it induces is investigated; this fault is critical due to the simultaneous air cooling and dehumidification occurring in the coil, that induce variations in both the chemical and th…
Thermoeconomic diagnosis of air conditioning systems: experimental assessment of performance for improved reliability
2018
Thermoeconomic diagnosis is an exergy-based fault detection and diagnosis technique which has been recently extended to air conditioning systems. So far, developments of this technique have relied only on simulation data without being evaluated using real data. For the first time, this work aims at assessing the performance of thermoeconomic diagnosis using experimental data obtained from a five-ton packaged rooftop air conditioning unit (RTU) installed at Herrick Laboratories, Purdue University. The RTU was tested in psychrometric chambers under a wide range of operating conditions and fault levels. The following faults were investigated: (i) evaporator fouling, (ii) condenser fouling and …
Analysis of the Potential of an Increase in Yeast Output Resulting from the Application of Additional Process Wastewater in the Evaporator Station
2019
This paper reports the results of an analysis of process wastewater streams in the context of an increase in yeast production. This research is based on the analysis of data from the biggest yeast factory in Europe. The research presented in this paper involves the analysis of the influence of direction of additional wastewater into the evaporator station on yeast production. In the process wastewater, nitrogen is mainly present in organic forms. The analysis reported in this paper involves the concentration of total nitrogen in wastewater streams, as it is the main parameter applied to determine the amount of wastewater that can be applied in agricultural fields. Directing additional waste…
Investigation of flashing phenomena in MSF chambers
2007
The MSF process has covered in the last years more than 50% of world production of desalinated water from the sea. Although this process has been used for several decades, the large energy requirements force to search for new and feasible ways to improve the overall thermal efficiency. Few studies have bee carried out in lab-scale, pilot and industrial MSF units, underlining the complexity of flashing phenomena and the importance of operating parameters settings for optimal performance. In the present work a study on fundamental phenomena occurring inside MSF chambers has been carried out, focusing on the dependence of flashing efficiency on operating parameters and the effects of flashing …
Performance maps for an air-cooled air conditioning system as a preliminary instrument for the diagnosis of evaporator fouling
2018
During the past few decades, there has been increased interest in the development of automated approaches for detecting and diagnosing faults in air conditioning systems. One diagnostic approach involves the use of exergy analysis. As a first step towards understanding the application of exergy analysis to diagnostics, this work is focused on the thermodynamic and exergy analysis of a direct expansion air conditioning system used in small commercial building applications. The analysis was carried out by means of experimental activities on a 17.5 kW rooftop unit installed at the Herrick Laboratories, Purdue University, Indiana (USA). The system under investigation was equipped with a variabl…
Prediction models to analyse the performance of a commercial-scale membrane distillation unit for desalting brines from RO plants
2018
Abstract Desalting brines from Reverse Osmosis (RO) plants is one of the most promising applications of Membrane Distillation (MD) systems. The development of accurate models to predict MD system performances plays a significant role in the design of this kind of industrial applications. In this paper, a commercial-scale Permeate-Gap Membrane Distillation (PGMD) module was modelled by means of two different approaches: Response Surface Methodology (RSM) and Artificial Neural Networks (ANN). Condenser inlet temperature, evaporator inlet temperature, feed flow rate and feed water salt concentration were selected as inputs of the model, while permeate flux and Specific Thermal Energy Consumpti…
On Thermoeconomic Diagnosis of a Fouled Direct Expansion Coil: Effects of Induced Malfunctions on Quantitative Performance of the Diagnostic Technique
2017
Thermoeconomic diagnosis represents a promising technique for the detection of common faults in refrigeration systems, which are responsible of degradation in their energetic performance. Recently, the authors have carried out a sensitivity analysis of the performance of this method to the thermodynamic conditions of inlet air and to the geometry of the direct expansion coil, in case of degradation induced by evaporator fouling. The analysis showed that the method is able to detect this fault, but sometimes its quantitative assessments are not satisfactory. In order to understand more in-depth the origin of such results and identify margins for refinement of the technique, this paper is aim…