Search results for "Exergy"

Exergetic and exergoeconomic analysis of a novel hybrid solar-geothermal polygeneration system producing energy and water

2016

Abstract A dynamic simulation model of a novel solar–geothermal polygeneration system and the related exergetic and exergoeconomic analyses are presented in this paper. The plant is designed in order to supply electrical, thermal and cooling energy and fresh water for a small community, connected to a district heating and cooling network. The hybrid system is equipped with an Organic Rankine Cycle fueled by medium-enthalpy geothermal energy and by a Parabolic Trough Collector solar field. Geothermal brine is also used for space heating and cooling purposes. Finally, geothermal fluid supplies heat to a Multi-Effect Distillation unit, producing also desalinized water from seawater. Dynamic si…

Performance maps for an air-cooled air conditioning system as a preliminary instrument for the diagnosis of evaporator fouling

2019

Abstract During the past few decades, there has been increased interest in the development of automated approaches for detecting and diagnosing faults in air conditioning systems. Among them, thermoeconomic diagnosis is a technique which involves the use of exergy analysis. As a first step towards improving its performance, this work is focused on the thermodynamic and exergy analysis of a direct expansion air conditioning system used in small commercial building applications. The analysis was carried out by means of experimental activities on a 17.5 kW rooftop unit installed at the Herrick Laboratories, Purdue University, Indiana (USA). The system under investigation was equipped with a va…

A tool for evaluating geothermal power exploitability and its application to Ischia, Southern Italy

2015

Abstract The paper proposes a method to evaluate the potential for electric power production at any site of possible geothermal interest. Accounting for geological data of the reservoirs, the method allows the computation of the available electrical power of the investigated site. Electrical energy production from geothermal sources is realized through different techniques, such as single flash and double flash, dry steam, and binary ORC plants. The technique chosen to be the most productive is determined by analyzing a specific range of geofluid properties, mainly temperature and pressure. Moreover, each plant typology has a global efficiency that may be correlated to geofluid enthalpy by …

On the reliability of thermoeconomic diagnosis of fouled evaporators: assessing the influence of geometries, operating conditions and reference state

2015

Thermoeconomic diagnosis of refrigeration systems is a pioneeristic approach, which has been proven to achieve good performances (under favorable conditions) for the detection of specific faults such as condenser and evaporator fouling and compressor valve leakage. In this paper the sensitivity of performance in detecting fouled Direct Expansion (DX) coils is investigated; the examined parameters are the temperature and relative humidity of coil inlet air and the sensible/latent heat ratio of the coil (varied by considering different numbers of rows). As the thermoeconomic model requires splitting the specific exergy of cooling air into “mechanical”, “thermal” and “chemical” fractions, and …

SETUP OF VIRTUAL EXPERIMENTS AND CRITICAL ANALYSIS OF CONVENTIONAL THERMOECONOMIC DIAGNOSIS OF MULTIPLE FAULTS IN AIR-CONDENSED ROOFTOP SYSTEMS

2012

The diagnosis of soft faults in vapor compression cooling systems is a crucial activity, since malfunctions may provoke heavy degradation in plant performance and increase the power consumption for space cooling. Among the various Faults Detection and Diagnosis techniques developed over the last two decades, thermoeconomic diagnosis has been playing only a marginal role due to the difficulties encountered when applying the conventional thermoeconomic approaches to vapor compression refrigeration plants. In this paper a critical analysis on capabilities and limits of thermoeconomic diagnosis of refrigeration systems is proposed. The reference plant assumed for this study is a 116 kWc air-con…

INNOVATIVE APPLICATIONS OF EXERGY ANALYSIS AND THERMOECONOMICS IN CHEMICAL, THERMAL AND COOLING ENERGY CONVERSION SYSTEMS

Since 70s, the world has been becoming more and more concerned about energy and environmental issues. The need of meeting the current energy demand by guaranteeing the ability of future generation to satisfy theirs have been pushing research not only to exploit alternative energy sources such as renewable energies, but also to improve the efficiency of energy conversion systems. To this regard, developing systems that use efficiently energy is of paramount importance especially in those countries which rely on non-renewable energy sources such as oil, natural gas, and coal. In fact, the reduction of energy consumption will lead not only to the saving of unrestorable and limited energy resou…

A Review of the Water Desalination Technologies

2021

Desalination is commonly adopted nowadays to overcome the freshwater scarcity in some areas of the world if brackish water or salt water is available. Different kinds of technologies have been proposed in the last century. In this paper, the state of the mainstream solutions is reported, showing the current commercial technologies like reverse osmosis (RO), Multi-Stages Flash desalination (MSF) and Multi-Effect Distillation (MED), and the new frontiers of the research with the aim of exploiting renewable sources such as wind, solar and biomass energy. In these cases, seawater treatment plants are the same as traditional ones, with the only difference being that they use a renewable energy s…

Advanced energetics of a Multiple-Effects-Evaporation (MEE) desalination plant. Part II: Potential of the cost formation process and prospects for en…

2010

This paper represents the 2nd part of a paper in two parts. In part I a 2nd Principle analysis of a Multiple- Effects-Evaporation (MEE) process has been proposed. In this Part II perspectives for process improvement will be investigated, along two distinct research lines: the thermoeconomics-aided optimization of a new system and the increase of thermal efficiency for existing systems by a pinch-based plant retrofit. As concerns the first research line, a detailed productive structure for the plant stage (i.e. effect) examined in Part I is presented; the cost formation structure is then used to improve a simplified optimization process, revealing capable to properly reflect the interactions…

Exergy Recovery during LNG Regasification: Electric Energy Production - Part Two

2009

In liquefied natural gas (LNG) regasification facilities, for exergy recovery during regasification, an option could be the production of electric energy recovering the energy available as cold. In a previous paper, the authors propose an innovative process which uses a cryogenic stream of LNG during regasification as a cold source in an improved combined heat and power (CHP) plant. Considering the LNG regasification projects in progress all over the World, an appropriate design option could be based on a modular unit having a mean regasification capacity of 2 × 109 standard cubic meters/year. This paper deals with the results of feasibility studies, developed by the authors at DREAM in the…

Exergy analysis of electrodialysis for water desalination: Influence of irreversibility sources

2022

The increasing freshwater demand is pushing the development and adoption of desalination technologies. In this framework, electrodialysis has a consolidated role in brackish water desalination, but to make it competitive with other technologies for the desalination of more concentrated solutions (e.g., seawater), the specific energy consumption should be reduced. Exergy analysis provides a useful tool for determining the contribution of each thermodynamic inefficiencies on the process efficiency and the specific energy consumption. In this regard, this paper presents an exergy analysis of the electrodialysis process. A 1-D model is used for evaluating the performance of industrial-scale sys…