Search results for "Experimental techniques"
showing 10 items of 226 documents
Silicon detectors for forward tracking in ATLAS
1996
Abstract A 12 cm long silicon microstrip detector module with a fan geometry has been designed and constructed. The performance of the detector has been studied in a test beam at CERN. Results are presented on the hit efficiency and the position resolution as a function of position along the strips. With a hit efficiency of 99.5% and a spatial resolution of typically 35 μm the performance of these detectors exceeds that of other candidate technologies for the precision forward tracker of the ATLAS inner detector.
ATLAS level-1 calorimeter trigger: subsystem tests of a Jet/Energy-sum Processor module
2003
The ATLAS Level-1 Calorimeter Trigger consists of a Preprocessor, a Cluster Processor (CP), and a Jet/Energy-sum Processor (JEP). The CP and JEP receive digitised trigger-tower data from the Preprocessor and produce trigger multiplicities and total and missing energy for the final trigger decision. The trigger will also provide region-of-interest (RoI) information for the Level-2 trigger and intermediate results of the data acquisition (DAQ) system for monitoring and diagnostics by using readout driver modules (ROD). The Jet/Energy-sum Processor identifies and localises jets, and sums total and missing transverse energy information from the trigger data. The Jet/Energy Module (JEM) is the m…
Density and geometry of single component plasmas
2007
Abstract The density and geometry of p ¯ and e + plasmas in realistic trapping potentials are required to understand and optimize antihydrogen ( H ¯ ) formation. An aperture method and a quadrupole oscillation frequency method for characterizing such plasmas are compared for the first time, using electrons in a cylindrical Penning trap. Both methods are used in a way that makes it unnecessary to assume that the plasmas are spheroidal, and it is shown that they are not. Good agreement between the two methods illustrates the possibility to accurately determine plasma densities and geometries within non-idealized, realistic trapping potentials.
A neutrino apparatus with improved capabilities for a short baseline νμ(νe) ↔ ντ search
1995
Abstract We propose the conceptual design of a Neutrino ApparatUS with Improved CApAbilities (NAUSICAA). This detector could be used for a new, short-baseline, high sensitivity νμ(νe) ↔ ντ oscillation search experiment at the CERN-SPS neutrino beam, as well as at the future Fermilab Main Injector neutrino beam. The heart of the detector is a finely instrumented target, made of a sandwich of a light Z material and high resolution tracking detectors. Downstream of the target there are tracking detectors for momentum measurement, followed by a compensating calorimeter. All these systems are contained within magnet providing a magnetic field of about 1 T. Following the magnet there is a muon de…
Performance of the NOMAD-STAR detector
2003
The NOMAD-STAR detector is a silicon vertex installed in the NOMAD spectrometer at the CERN SPS neutrino beam. It consists of four layers of a passive boron carbide target with a total mass of 45 kg and five layers of 600 single sided silicon microstrip detectors covering a total area of 1.14m^2. About 11,500 nu_mu charged current interactions were reconstructed in the fiducial volume of NOMAD-STAR from the neutrino run in 1998. The potential use of silicon detectors for nu_mu (nu_e) nu_tau oscillations depends on the observation of the tau candidates by the experimental signature of a large impact parameter, in the case of the one prong decay of the tau, or a double vertex, in the case of …
Search for νμ(νe) ↔ ντ oscillations with a detector based on a emulsion-silicon target
1996
We discuss the performance of a next generation νμ(νe)↔ ντ oscillation experiment, based on a target consisting of a sandwich of nuclear emulsion layers and silicon detectors. The target would be followed by a full spectrometer for energy-momentum measurement and particle identification. A τ-enriched sample is selected in terms of vertex and kinematical criteria using the electronic spectrometer, with very high efficiency, while at the same time reducing the load of background events to be scanned by up to two orders of magnitude. Events fulfilling the selection criteria are very efficiently located and scanned in the emulsion, thanks to the very good resolution allowed by the silicon track…
Use of an FPGA to identify electromagnetic clusters and isolated hadrons in the ATLAS level-1 calorimeter trigger
2003
Abstract At the full LHC design luminosity of 10 34 cm −2 s −1 , there will be approximately 109 proton–proton interactions per second. The ATLAS level-1 trigger is required to have an acceptance factor of ∼10−3. The calorimeter trigger covers the region |η|⩽5.0, and φ=0 to 2π. The distribution of transverse energy over the trigger phase space is analysed to identify candidates for electrons/photons, isolated hadrons, QCD jets and non-interacting particles. The Cluster Processor of the level-1 calorimeter trigger is designed to identify transverse energy clusters associated with the first two of these. The algorithms based on the trigger tower energies which have been designed to identify s…
Kalman filter tracking and vertexing in a silicon detector for neutrino physics
2002
Abstract This article describes the application of Kalman filter techniques for the tracking and vertexing of particles inside the NOMAD-STAR detector, a silicon vertex detector installed in NOMAD, one of the neutrino oscillation experiments at the CERN-SPS. The use of the Kalman filter simplifies computationally the tracking and vertex procedure for NOMAD-STAR. The alignment of NOMAD-STAR is shown as an example of the application of the Kalman filter for tracking purposes. The accuracy of the method is such that one obtains alignment residuals between 9 and 12 μm . Furthermore, a preliminary measure of the impact parameter (with an RMS ∼36 μm ) illustrates the vertexing capabilities of thi…
The ATLAS Tile Calorimeter performance at LHC
2013
The Tile Calorimeter (TileCal), the central section of the hadronic calorimeter of the ATLAS experiment, is a key detector component to detect hadrons, jets and taus and to measure the missing transverse energy. Due to the very good muon signal to noise ratio it assists the spectrometer in the identification and reconstruction of muons. TileCal is built of steel and scintillating tiles coupled to optical fibers and read out by photomultipliers. The calorimeter is equipped with systems that allow to monitor and to calibrate each stage of the read-out system exploiting different signal sources: laser light, charge injection and a radiactive source. The performance of the calorimeter has been …
The fast readout system for the MAPMTs of COMPASS RICH-1
2007
A fast readout system for the upgrade of the COMPASS RICH detector has been developed and successfully used for data taking in 2006 and 2007. The new readout system for the multi-anode PMTs in the central part of the photon detector of the RICH is based on the high-sensitivity MAD4 preamplifier-discriminator and the dead-time free F1-TDC chip characterized by high-resolution. The readout electronics has been designed taking into account the high photon flux in the central part of the detector and the requirement to run at high trigger rates of up to 100 kHz with negligible dead-time. The system is designed as a very compact setup and is mounted directly behind the multi-anode photomultiplie…