Search results for "Extrusion"
showing 10 items of 142 documents
Low-density polyethylene/polyamide/clay blend nanocomposites: Effect of morphology of clay on their photooxidation resistance
2017
The photooxidation behaviour of low-density polyethylene (LDPE)/polyamide (PA) blends, containing polyamide 11 (PA11) or polyamide 6 (PA6), has been investigated in the absence and presence of a small amount of commercial organomodified clay (OMMT). The polymer blends LDPE/PA11 and LDPE/PA6 at 75/25 wt./wt.%, with and without OMMT, have been prepared by a two-step procedure: extrusion and sheet formulation. The formulated complex systems have been subjected to accurate morphological analysis in order to evaluate the effect of the OMMT presence on the refinement of the blend morphology. Furthermore, the produced sheets have been subjected to arterial UVB exposure and the variations of the me…
EVA-montmorillonite nanocomposites: effect of processing condition
2004
The aim of this study is to examine the effect of the compounding apparatus and of processing conditions on the properties of an organoclay-poly[ethylene-co-(vinyl acetate)] (EVA) nanocomposite. The filled materials were prepared using either a discontinuous batch mixer, a single screw extruder, a counter rotating intermeshing twin-screw compounder or a corotating intermeshing twin-screw extruder. The characterization of the obtained nanocomposites was performed by XRD, thermogravimetry, mechanical and rheological measurements. The study has shown the possibility of producing nanocomposites based on EVA and a commercial organoclay (Cloisite 15A) by several mixing equipments. In fact all the…
A Comparison of Different Irrigation Systems and Gravitational Effect on Final Extrusion of the Irrigant
2015
Background: The aim of this study was to compare manual needle irrigation (MNI), RinsEndo (RE), and passive ultrasonic irrigation (PUI), and assess the effect of gravity on extrusion from the apex in vitro. Material and Methods: The distobuccal roots of molars were used and the canals were instrumented up to F2. Teeth were mounted on models, which permitted visualization and manipulation of the apices for necessary procedures. The models were placed in articulator to simulate the jaw. Six groups (G) were formed as: G1, G2 and G3 represented mandibular positioning of teeth and were irrigated with MNI, RE, and PUI, respectively, while G4, G5, and G6 represented maxillary positioning of teeth …
Does muscular activity related to vertical facial divergence influence the time needed for orthodontic extrusion of palatally impacted maxillary cani…
2018
Background The aim of the present study was to evaluate if the different muscular activity correlated to different degrees of facial divergence has an effect on the time needed to extrude a palatally impacted maxillary canine. Material and methods Twenty-six patients were retrospectively selected, all treated with a specific cantilever appliance that allows extrusion of the impacted canine applying a physiologic amount of force below 0.6 N in a predictable way. For all the patients, pre-treatment cephalometric tracings were used to evaluate facial divergence through the FMA angle, the angle between the maxillary and mandibular plane, and the angles between the occlusal plane and either the …
Management of a crown-root fracture : a novel technique with interdisciplinary approach
2018
Anterior teeth with subgingival fractures require a complex treatment plan that addresses biologic, functional and aesthetic factors. This case report describes the management of a crown-root fractured maxillary left central incisor. An interdisciplinary approach was used to restore the tooth due to the complex nature of the treatment. Orthodontic extrusion was performed to move the fracture line above the alveolar bone and periodontal surgery to recontour the altered gingival margin. Finally, the incisor was restored performing a root canal retreatment with a fiber post and a full ceramic crown. The treatment resulted in secured periodontal health and good aesthetics. Key words:Crown-root …
DEGRADATION OF MATER-BI /WOOD FLOUR BIOCOMPOSITES IN ACTIVE SEWAGE SLUDGE
2009
The mechanical properties of Mater-Bi® are, in general, not adequate for certain applications and the addition of a filler is therefore necessary. Among the different fillers, natural fibres are particularly interesting because they potentially allow improving the performance of the material without compromising its biodegradability. In order to improve the basic mechanical properties of a Mater-Bi grade and to obtain a new, fully biodegradable material, wood flour based composites were prepared by different processing methods. To simulate actual and not laboratory bacterial attack on the prepared materials, in this work we studied the biodegradation of the composites in a real active sewag…
Recycling of compatibilized and uncompatibilized nylon/polypropylene blends
2001
The recycling of compatibilized and uncompatibilized nylon6/polypropylene blends has been carried out by repetitive extrusions. The change of the properties of the blends is a function not only of the number of reprocessing steps but also of the type of compatibilizer. The worsening of the mechanical properties is small and, indeed, some improvement can be observed after one or two extrusion steps for some blends. It is hypothesised that the decrease of the molecular weight, the typical effect occurring during this thermomechanical treatment, is counterbalanced and overcome by the possible formation of new copolymers that act as bridges between the two phases. This behaviour is displayed by…
Processing-property relationships of polypropylene/ciprofloxacin fibers
2015
In this work we prepared polypropylene (PP) fibers incorporating an antibiotic, i.e. ciprofloxacin (CFX), by melt spinning. In particular, PP has been compounded with CFX at different concentrations by using a counter-rotating twin screw compounder. The PP/CFX fibers have been spun by using a capillary rheometer operating under a constant extrusion speed. The effect of “online” hot drawing during the melt spinning or of an “offline” cold drawing on the properties of PP/CFX fibers were evaluated. In particular, the influence of the drawing conditions on the mechanical properties and the release kinetics were studied. Moreover, the rheological behavior in non-isothermal elongation flow has be…
Accelerated weathering of polypropylene/wood flour composites
2008
Abstract Wood–plastic composites (WPCs) have received increasing attention during the last decades, because of many advantages related to their use. Some of their main applications are represented by outdoor furnishing and decking; therefore, it is important to assess their behaviour under UV exposure. In this work, polypropylene/wood flour composites were prepared and their resistance to photooxidation investigated. The composites were prepared by extrusion and compression moulding, and were subjected to mechanical tests, FTIR analysis and molecular weight measurements. The results showed that the composites retained a higher fraction of the original mechanical properties after accelerated…
Improved experimental characterization of crystallization kinetics
2005
Polymer solidification occurring in many processes, like for instance injection molding, compression molding and extrusion, is a complex phenomenon, strongly influenced by the thermo-mechanical history experienced by the material during processing. From this point of view, characterization of polymer crystallization in the range of processing con- ditions, i.e. including high cooling rate, is of great technological and academic interest. Quiescent, non-isothermal crys- tallization kinetics of two polypropylene resins were investigated using a new method, based on fast cooling of thin samples with air/water sprays and optical detection of the crystallization phenomenon. The range of cooling …