Search results for "FIBER LASER"
showing 10 items of 200 documents
Time-domain fiber laser hydrogen sensor.
2004
We report a novel scheme for a fiber-optic hydrogen sensor based on an erbium-doped fiber laser with a palladium-coated tapered fiber within the laser cavity. The tapered fiber acts as a hydrogen-sensing element. When the sensing element is exposed to a hydrogen atmosphere, its attenuation decreases, changing the cavity losses and leading to a modification of the laser transient. The hydrogen concentration is obtained by simple measurement of the buildup time of the laser. This technique translates the measurement of hydrogen concentration into the time domain, and it can be extended to many intensity-based fiber sensors. Relative variations in the buildup time of up to 55% at an increase o…
Shaping the supercontinuum spectral profile
2009
We numerically recognize a procedure for shaping, at least to some extent, the spectral profile of the supercontinuum (SC) generated by soft-glass photonic crystal fibers (PCFs). As example, we identify a PCF geometry that provides an ultrawide (over an octave) and very flat SC when pumped with pulsed light parameters corresponding to a commercially available Er-doped femtosecond fiber laser.
Intensity-Modulated Optical Fiber Sensor for AC Magnetic Field Detection
2015
An erbium-doped (Er3+) fiber optic laser is proposed for sensing alternated magnetic fields by measuring the laser intensity modulation. The sensor is fabricated using two partially overlapped narrow-band fiber Bragg gratings (FBGs) and a section of doped fiber in a Fabry–Perot configuration. Laser power stability and bandwidth are studied while changing the overlap. A bulk rod of TbDyFe, a magnetostrictive material, is glued to both the FBGs and the laser wavelength and power are modulated according to the magnetic field. Acquisition and processing are done using virtual instrumentation. Results have shown the possibility of detecting 11.18 $\mu \text{T}_{\mathrm {{rms}}}/\surd $ Hz for an…
Conical Fiber Probe for Mechanical Stabilization of Microbubbles in Liquids
2020
We demonstrate that a cone pierced in a fiber tip can stabilize microbubles photothermally generated in liquids. Bubbles can stand and monitor pressure shocks over 3.3 bar with a sensitivity below 7 mbar.
Flat supercontinuum generation pumped by amplified noise-like pulses from a figure-eight erbium-doped fiber laser
2017
The conditions to obtain noise-like pulses (NLPs) from a figure-eight fiber laser (F8L) and their application for supercontinuum (SC) generation in the anomalous dispersion regime are reported. The F8L is designed to remove the undesired low-intensity background radiation from pulse emission, generating NLPs with a 3 dB spectral bandwidth of 17.43 nm at the fundamental repetition frequency of 0.8 MHz. After amplification, NLPs reach a maximum average power of 9.2 mW and 123.32 nm spectral bandwidth. By controlling the amplifier pump power, flat SC generation is demonstrated through both a 800 m long spool of SMF-28 fiber and a piece of 5 m long highly nonlinear optical fiber. The results de…
Tunable Dual-Wavelength Thulium-Doped Fiber Laser Based on FBGs and a Hi-Bi FOLM
2017
A tunable dual-wavelength thulium doped fiber laser is demonstrated experimentally. For the first time for the 2- $\mu \text{m}$ wavelength band we propose the independent tuning of the generated laser lines based on fiber Bragg gratings and the use of a Hi-Bi fiber optic loop mirror for the fine adjustment of the cavity losses to obtain stable dual-wavelength operation. Dual-wavelength laser generation with the laser lines separation in the range from 0.3 to 6.5 nm is obtained. The laser emission exhibits an optical signal-to-noise ratio better than 56 dB. Improved stability with output power fluctuations less than 1 dB is observed in dual-wavelength generation with equal power of lines.
High frequency microwave signal generation using dual-wavelength emission of cascaded DFB fiber lasers with wavelength spacing tunability
2010
[EN] A dual wavelength fiber laser source based on two cascaded phase-shifted fiber Bragg gratings is presented The gratings are written in an erbium-doped fiber each configuring the cavity of a distributed feedback fiber laser The spacing between lasing modes is controlled dynamically by the use of piezoelectric actuators A continuous tuning range of 5-724 pm of the wavelength difference which is equivalent to a photodetected 072-92 GHz range is obtained Efficient generation from the L to the W microwave and millimeter bands has been achieved by heterodyne photodetection of the dual-wavelength optical signal (C) 2010 Elsevier BV All rights reserved
Characteristics of laser operation at 1064 nm in Nd:YVO_4 under diode pumping at 808 and 914 nm
2011
International audience; A comparative study between 808 and 914nm pumping of Nd:YVO4 crystals for laser operation at 1064nm has been carried out. Using similar setups, performances of both configurations were first studied in the continuous wave, small-signal gain, and Q-switched regimes. Thanks to a numerical model, it is shown that fluorescence quenching and upconversion processes limit the possible uses for the 914nm pumping scheme to regimes with low population inversions
A review of the development of portable laser induced breakdown spectroscopy and its applications
2014
Abstract In this review, we present person-transportable laser induced breakdown spectroscopy (LIBS) devices that have previously been developed and reported in the literature as well as their applications. They are compared with X-ray fluorescent (XRF) devices, which represent their strongest competition. Although LIBS devices have advantages over XRF devices, such as sensitivity to the light elements, high spatial resolution and the possibility to distinguish between different layers of the sample, there are also disadvantages and both are discussed here. Furthermore, the essential portable LIBS instrumentation (laser, spectrograph and detector) is presented, and published results related…
Dynamic control of the operation regimes of a mode-locked fiber laser based on intracavity polarizing fibers: experimental and theoretical validation.
2012
[EN] An intracavity polarizing fiber is proposed to control the emission regime of a passively mode-locked fiber laser. Stable operation in self-starting high and low dispersion soliton mode-locking and 100 GHz multiwavelength regimes is demonstrated through numerical simulations and experimental validation. Mode-locking stability is ensured by a saturable absorber in the ring cavity. The effective selection of operation regime is dynamically carried out by controlling the intracavity polarization state.