Search results for "Ferrite"
showing 10 items of 98 documents
The Ba2LnFeNb4O15 “tetragonal tungsten bronze”: Towards RT composite multiferroics
2009
Several Niobium oxides of formula Ba2LnFeNb4O15 (Ln = La, Pr, Nd, Sm, Eu, Gd) with the Tetragonal Tungsten Bronze (TTB) structure have been synthesised by conventional solid-state methods. The Neodymium, Samarium and Europium compounds are ferroelectric with Curie temperature ranging from 320 to 440K. The Praseodymium and Gadolinium compounds behave as relaxors below 170 and 300 K respectively. The Praseodymium, Neodymium, Samarium, Europium and Gadolinium compounds exhibit magnetic hysteresis loops at room temperature originating from traces of a barium ferrite secondary phase. The presence of both ferroelectric and magnetic hysteresis loops at room temperature allows considering these mat…
Photocatalytic activity of non-stoichiometric ZnFe2O4under visible light irradiation
2014
Nanostructured zinc ferrites with different excess iron contents (ZnFe2+zO4, where z = 0.00, 0.05, 0.10 and 0.15) have been synthesized using the sol–gel auto-combustion method. The effect of excess iron on the structural, optical and visible light photocatalytic activity of zinc ferrite samples has been investigated. X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), x-ray magnetic circular dichroism (XMCD), Brunauer–Emmett–Teller theory, scanning electron microscopy (SEM), diffuse reflectance spectroscopy (UV–Vis) and photoluminescence spectroscopy were used to characterize the synthesized non-stoichiometric ZnFe2O4 powders. The XRD patterns demonstrated that the samples con…
Controlling phase formation in solids: rational synthesis of phase separated Co@Fe2O3 heteroparticles and CoFe2O4 nanoparticles
2011
A wet chemical approach from organometallic reactants allowed the targeted synthesis of Co@Fe(2)O(3) heterodimer and CoFe(2)O(4) ferrite nanoparticles. They display magnetic properties that are useful for magnetic MRI detection.
Mechanical activation conditions of the Fe2O3 and V2O3 mixture powders in order to obtain a nanometric vanadium spinel ferrite
1999
Abstract Co-milling of iron and vanadium oxides allows to obtain an intimate oxides mixture at a nanoscale, similar to a coprecipitate elaborated by soft chemistry. Reduction of such a mixture in the same temperature and oxygen partial pressure conditions (500°C and 10−25 Pa) as the soft chemistry products leads to a nanometric vanadium ferrite with the only spinel phase. The characterization of the powders is achieved by X-ray diffraction (XRD), scanning electron microscopy, infrared (IR) spectrometry, thermogravimetry and calorimetry. Homogeneity of grain size and chemical composition is reached if the initial oxides have similar grain size.
High pressure in-situ X-ray diffraction study on Zn-doped magnetite nanoparticles
2018
We have performed high pressure synchrotron X-ray powder diffraction experiments on two different samples of Zn-doped magnetite nanoparticles (formula Fe(3-x)ZnxO4; x = 0.2, 0.5). The structural behavior of then a noparticles was studied up to 13.5 GPa for x = 0.2, and up to 17.4 GPa for x = 0.5. We have found that both systems remain in the cubic spinel structure as expected for this range of applied pressures. The analysis of the unit cell volume vs. pressure results in bulk modulus values lower than in both end-members, magnetite (Fe3O4) and zinc ferrite (ZnFe2O4), suggesting that chemical disorder may favor compressibility, which is expected to improve the increase of the Neel temperatu…
Novel metallic iron/manganese-zinc ferrite nanocomposites prepared by microwave hydrothermal flash synthesis
2011
8 Caillot, T. Pourroy, G. Stuerga, D.; Metallic iron (alpha-Fe)/manganese-zinc ferrite (Fe3-x-yMnxZnyO4) nanocomposites have been successfully synthesized for the first time using microwave hydrothermal treatment of alcoholic solutions of chloride precursors and sodium ethoxide. This new type of nanocomposites, never obtained by conventional synthesis, can now be produced in a short period (e.g. 15s). The powders were characterized by X-ray diffraction, transmission electron microscopy and magnetic properties were measured. In most cases, three classes of crystallites were observed; one of them is composed of grains of about 100 nm in size where the metal is inserted into the oxide. For all…
Effect of the preparation method and grinding time of some mixed valency ferrite spinels on their cationic distribution and thermal stability toward …
1996
Abstract The reactivity in oxygen of several mixed valency ferrite spinels, namely Fe3O4, FeCr2O4, Fe3 − xTixO4 and Fe3 − xMoxO4 was investigated by derivative thermogravimetry (DTG) analysis as a function of the conditions of preparation and grinding. For all these compounds, low temperature preparation or prolonged grinding time enables small particles ( 0.5 μm), it was observed that oxidation was starting at higher temperature and that the defect spinel phases could not be retained during oxidation. This behaviour was attributed to the presence of stresses induced by the lattice parameter gradient and promoting the formation of nuclei of the α-rhombohedral phase from the superficial γ-de…
Mesoporous ZnFe2O4@TiO2 Nanofibers Prepared by Electrospinning Coupled to PECVD as Highly Performing Photocatalytic Materials
2017
International audience; Zinc ferrite @ titanium dioxide (ZnFe2O4@TiO2) composite nanofibers were elaborated by combining the two different techniques: electrospinning and plasma-enhanced chemical vapor deposition (PECVD). The nanofiber compositions were controlled using different ratios of zinc to iron. Their structural, morphological, and optical properties were analyzed by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, BET surface area, Raman spectroscopy, and UV–visible spectrophotometry. The photocatalytic activity has been investigated by the degradation of methylene blue under visible light. The results indicate that the combination of spinel st…
Characterization of Different Cable Ferrite Materials to Reduce the Electromagnetic Noise in the 2–150 kHz Frequency Range
2017
The gap of standardization for conducted and field coupled electromagnetic interferences (EMI) in the 2–150 kHz frequency range can lead to Electromagnetic Compatibility (EMC) problems. This is caused by power systems such as Pulse Width Modulation (PWM) controlled rectifiers, photovoltaic inverters or charging battery units in electric vehicles. This is a very important frequency spectral due to interferences generated in a wide range of devices and, specifically, communication problems in the new technologies and devices incorporated to the traditional grid to convert it into a Smart Grid. Consequently, it is necessary to provide new solutions to attenuate this kind of interference, which…
Effect of antisite defects on the magnetic properties of ZnFe2 O4
2013
Magnetic zinc ferrite (ZnFe2O4) nanopowders were synthesized using the sol–gel autocombustion method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) measurements demonstrated that thermal decomposition of the 1-mm-thick xerogel layers in air formed monophasic spinel ferrite nanopowders with a particle size less than 30 nm. X-ray photoelectron spectroscopy (XPS) showed that the obtained reaction product contained antisite defects, with zinc ions occurring at the octahedral sites of the spinel structure. The concentration of antisite defects or inversion degree decreased when the relatively low annealing temperature was increased from 150 to 500 °C. Overall, the obtained ZnFe2…