Search results for "Fiber Optic"
showing 10 items of 193 documents
Effects of clearance on thick, single-lap bolted joints using through-the-thickness measuring techniques
2011
Composite materials have increasingly become more common in ground transportation. As this occured thicker panels, as compared to composite panels used in aviation, become necessary in order to withstand high impact loads and day to day degradation. The effectiveness of these panels was often limited by the strength of the joint in which the panel was attached to the frame of the vehicle. Investigating methods of reducing strain concentrations within these joints would increase the effectiveness in using composite materials in ground transportation applications by increasing the load necessary for joint failure to occur. In this study, fiber optic strain gages were embedded in a composite p…
Instantaneous frequency measurement by in-fiber 0.5th order fractional differentiation
2016
We experimentally demonstrate the possibility to retrieve the instantaneous frequency profile of a given temporal light pulse by in-fiber fractional order differentiation of 0.5th-order. The signal's temporal instantaneous frequency profile is obtained by simple dividing two temporal intensity profiles, namely the intensities of the input and output pulses of a spectrally-shifted fractional order differentiation. The results are supported by the experimental measurement of the instantaneous frequency profile of a mode-locked laser. Fil: Poveda-Wong, L.. Universidad de Valencia; España Fil: Carrascosa, A.. Universidad de Valencia; España Fil: Cuadrado Laborde, Christian Ariel. Consejo Nacion…
Experimental demonstration of fractional order differentiation using a long-period grating-based in-fiber modal interferometer
2016
In this work we demonstrate both, experimentally and theoretically, that a long-period grating-based in-fiber modal interferometer can perform an all-optical arbitrary-order fractional differentiation. Experimentally, we fractionally differentiated to the 0.5th order a secant hyperbolic-like pulse of 23 ps time width provided by a 1039.5 nm emission wavelength modelocked fiber laser, with a chirp parameter of −30. An analytical expression relating the fractional order of differentiation n with the characteristics of the modal interferometer was also derived, with the purpose to simplify the design procedure. The proposal was corroborated also numerically. This device may find applications i…
Active plasmonics in WDM traffic switching applications
2012
With metal stripes being intrinsic components of plasmonic waveguides, plasmonics provides a "naturally" energy-efficient platform for merging broadband optical links with intelligent electronic processing, instigating a great promise for low-power and small-footprint active functional circuitry. The first active Dielectric-Loaded Surface Plasmon Polariton (DLSPP) thermo-optic (TO) switches with successful performance in single-channel 10 Gb/s data traffic environments have led the inroad towards bringing low-power active plasmonics in practical traffic applications. In this article, we introduce active plasmonics into Wavelength Division Multiplexed (WDM) switching applications, using the …
Linear and nonlinear fiber propagation of partially coherent fields exhibiting temporal correlations
2019
International audience; Using ultrafast photonic first-order differentiator applied on a partially coherent field, we report the generation of two correlated temporal waveforms and study their correlation properties upon linear and nonlinear propagation along the two orthogonal polarization axis of a dispersive optical fiber. Temporal correlations are maintained in linear propagation whereas Kerr nonlinearity generates anti-correlated temporal intensity patterns for both partially and uncorrelated fields. Experiments are in close agreement with the theoretical analysis.
Broadband dispersion compensation using inner cladding modes in photonic crystal fibers.
2012
A photonic crystal fiber is optimized for chromatic dispersion compensation by using inner cladding modes. To this end, a photonic-oriented version of the downhill-simplex algorithm is employed. The numerical results show a dispersion profile that accurately compensates the targeted dispersion curve, as well as its dispersion slope. The presented fiber has a simple structure, while radiation losses can be reduced simply by adding a few more air-hole rings. Fabrication tolerances are also considered showing how fabrication inaccuracies effects can be overridden by just adjusting the compensation length.
Demonstration of polarization pulling using a fiber-optic parametric amplifier
2012
International audience; We report the observation of all-optical polarization pulling of an initially polarization-scrambled signal using parametric amplification in a highly nonlinear optical fiber. Broadband polarization pulling has been achieved both for the signal and idler waves with up to 25 dB gain using the strong polarization sensitivity of parametric amplifiers. We further derive the probability distribution function for the final polarization state, assuming a randomly polarized initial state, and we show that it agrees well with the experiments.
Oligonucleotide-Hybridization Fiber-Optic Biosensor using a Narrow Bandwidth Long Period Grating
2017
Nanometric narrowband Long Period Gratings (LPG) are investigated for the implementation of improved fiber optic biosensors. The reduction of more than one order of magnitude in the linewidth of the LPG with respect standard LPG at 1500 nm, leads to the improvement of the resolution of the sensor. By selecting the proper fabrication parameters (high numerical aperture, relatively high order mode and large length), LPGs with a 3-dB bandwidth of 1.5 nm were fabricated. The sensitivity of the LPG as a refractometer was calculated, and experimentally characterized in detail. In particular, the LP0,17 and LP0,18 resonances were investigated, in order to select the most suitable one for the bioex…
TeO2-ZnO-La2O3 tellurite glass system investigation for mid-infrared robust optical fibers manufacturing
2021
Abstract TeO2-ZnO-La2O3 (TZL) ternary glasses were investigated in order to manufacture step-index optical fibers with low optical losses in the near- and mid-infrared ranges and superior mechanical properties. To identify appropriate TZL glass compositions for optical fibers manufacturing, the whole vitreous domain of the ternary diagram was explored by characterizing bulk samples from thermal and optical point of view. Investigations were focused on understanding how the refractive index evolves as a function of the composition. For this, several parameters were analyzed such as density, molar volume, oxygen packing density, molar refractivity, polarizability and optical basicity. Finally…
Fiber-based measurement of temporal intensity and phase profiles of an optical telecommunication pulse through self-phase modulation
2018
International audience; We propose and experimentally validate an all-fiber based approach to characterize the phase and intensity profiles of optical pulses. Based on three optical spectra affected by different levels of self-phase modulation, we were able to reconstruct the temporal details of pulses typical of optical telecommunications.