Search results for "Finite Element Method"
showing 10 items of 746 documents
Simple equations for strength and deformability verification of tubular steel wind turbine towers
2021
Abstract Simple analytical expressions for a preliminary design of tubular steel wind turbine towers under flexure and shear are proposed. Expressions derived included local buckling effects, shear to moment interaction, ovalization of cross-section and inelastic rotation of foundation. A finite-element analysis with ABAQUS program was also conducted for examination of the ovalization effects and for the whole response of steel tube in flexure. Numerical and analytical results were compared with the experimental results of recent studies available in the literature, showing good agreement. The range of variable investigated refers to medium and large size steel wind tower with cylindrical s…
Experimental Research of the Formability of Lightweight Metallic Materials Used in Automotive Industry
2015
This paper aims to study the plastic deformation behaviour of lightweight metallic materials in order to reduce the total weight of the vehicles without affecting their performances. For the theoretical and experimental researches presented here, among these materials the AZ31B magnesium alloy has been chosen, a representative alloy for the magnesium-zinc-aluminium alloy system. The results of the theoretical researches, made on finite elements models, were validated by means of experimental researches consisting of tensile tests, forming limit curves determination tests and AZ31B magnesium alloy drawing, respectively.
Polarimetric Plasmonic Sensing with Bowtie Nanoantenna Arrays
2015
We propose a polarimetric plasmonic biosensor based on bowtie nanoantenna array transducers. Through numerical simulations, based on the finite element method (FEM), we study the phase retardation between the components of light polarized parallel and perpendicular to the major axis of the bowties within the arrays. From a design for high volumetric sensitivity at a wavelength of 780 nm, sensitivities ∼5 rad/RIU is obtained, corresponding to a detection limit of ∼10−7 when using a polarimetric readout platform. Similarly, surface sensitivity of the same array is evaluated by simulating the phase retardation changes induced by the coverage of bioreceptors and analytes of the metallic nanostr…
Electromechanical Behavior of Single and Multiwall Carbon Nanotubes
2008
Carbon nanotubes (CNTs) can be metallic or semiconductors depending simply on geometric characteristics. This peculiar electronic behavior, combined with high mechanical strength, make them potential building blocks of a new nano-electronic technology. High resolution images of CNTs often disclose structural deformations such as bent, twisted, or collapsed tubes. These deformations break the tube symmetry, and a change in their electronic properties should result. A computationally effective mixed finite element-tight-binding approach able to simulate the electromechanical behavior of single and multiwall nanotubes used in nano-electronic devices is presented. The finite element (FE) comput…
Compressive behaviour of eccentrically loaded slender masonry columns confined by FRP
2018
Abstract Fibre Reinforced Polymer (FRP) confinement represents an effective tool for retrofitting masonry piers or columns enhancing their structural performance. This technique has been widely studied in the literature mainly with reference to short columns, while no extensive information is available on the influence of second order effects on its efficacy in case of slender members. Within this framework, the presented study concerns a simplified method able to assess the effects of FRP confinement on the compressive behaviour of slender masonry columns. A proper constitutive law of FRP confined masonry in compression is adopted for performing a sectional analysis, in which also consider…
Solid-fluid interaction in a pillar-based phononic crystal
2016
In this paper, we investigate the wave dispersion of two dimensional pillar-based phononic crystal surrounded in liquid medium. An unit cell structure with reduced pillar height (hp/a)=0.5 and reduced radius (rp/a)=0.3 is simulated using Finite Element Method. The geometrical parameter is chosen to demonstrate a local resonance mechanism that allow the confinement of elastic energy at the interface between the solid and the fluid. In order to identify the energy distribution, we represent the eigenmode at high symmetry (point X) in the first Brillouin zone. The decreasing trend of frequency is also boosted with the increase of pillar height. From the total displacement, the energy is mostly…
Numerical Procedure For Residual Stresses Prediction In Friction Stir Welding
2011
The prediction of residual stresses is a relevant and, under many points of view, still open issue for a proper welding process design. In the present paper a 3D FE model, with general validity for different joint configurations, was used to simulate the Friction Stir Welding (FSW) process of butt joints through a single block approach. The model is able to predict the residual stresses by considering thermal actions only, thanks to a new time efficient approach. A good agreement between calculated and experimentally measured data was found; the effectiveness of the presented numerical procedure was evaluated by comparing the calculation times of the proposed method with the ones of already…
Influence of laser beam profile on the generation of ultrasonic waves
2011
The different ultrasonic fields generated in metallic materials by a laser beam with flat and Gaussian profile are investigated experimentally and using the finite element method (FEM). A high power laser beam irradiating a solid surface produces elastic waves with a mechanics that depends on many parameters, including the profile of the laser beam. The influence of the beam profile is investigated with the FEM analysis, considering the temperature dependence of material properties.
Analytical modelling of force transmission in axially loaded RC columns with indirectly loaded jackets
2019
Abstract Concrete and steel jacketing are common strengthening techniques for reinforced concrete (RC) columns subjected to axial loads. In the most of cases the external jacket is made leaving gaps between the strengthening layer and the slabs, avoiding to carry directly a portion of the load. In this way, the external jacket induces a confinement pressure on the inner column, and its beneficial effect is due to the increase of strength and ductility. However, shear stresses develop on the interface between the column and consequently, the external jacket can be considered indirectly loaded. It sustains a portion of the axial load, which depends by the value of the axial shortening, relati…
Behaviour of concrete deep beams with openings and low shear span-to-depth ratio
2012
Abstract The goal of this study is to experimentally and analytically evaluate the influence of circular openings in reinforced concrete deep beams with low shear span-to-depth ratio. Twenty reinforced concrete small-scale deep beams with or without openings were tested in flexure under four-point loading. The beams had a small shear span-to-depth ratio in order to stress the shear behavior. The specimens had different reinforcement arrangements and opening positions. The load was transmitted to the specimen with bearing plates having the same side length as the beam. Two LVDT’s were arranged to record the transverse and axial strain of the theoretical struts forming in the beam. Additional…