Search results for "Finite element method"
showing 10 items of 746 documents
Application of cohesive-zone models to delamination behaviour of composite material
2012
International audience; The parameters of cohesive elements have to be chosen correctly in the simulation of composite delamination by finite element method: such as interface strength, interface stiffness and shape of cohesive law. The purpose of this work is to investigate their influence on the accuracy of the results obtained. A three-dimensional cohesive-zone model has been established using Ls-dyna to simulate Double-Cantilever-Beam mode I (DCB) and Edge-Notched-Flexure mode II (ENF) tests. The influence of these parameters of cohesive element on the maximum load and the slope of load-displacement curve have been discussed by comparing experimental and numerical results. Four traction…
On tool stirring action in friction stir welding of work hardenable aluminium alloys
2013
In the paper solid state bonding conditions obtained in friction stir welding (FSW) of AA5754-H111 butt joints are analysed, considering the so called zigzag line in the transverse section of the joints. A wide experimental campaign was carried out varying both tool advancing speed and tool rotational one. The effects of the process on the mechanical properties of the joint were highlighted and micro- and macro-observations were used in order to explain the reasons of the enhanced mechanical properties found for the welded material. Numerical results derived from a FEM model previously developed by the authors were utilised to point out the different mechanical and metallurgical behavior of…
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
2017
Abstract The present work investigates the features of an active Infrared-NDT Thermography technique derived from a Flying Laser Spot set-up for the analysis of interlaminar disbonds in layered structures in general and Fibre Metal Laminates in particular. The presented technique uses a laser-spot heat source, which moves at a constant speed, raster scanning the object surface. Interlaminar defects parallel to the surfaces act as barriers towards through-the-thickness heat diffusion. This produces some modifications over the surface thermal field which are well identified in the Standard Deviation calculated over a Reference Area following the heat source. The mechanisms leading to such def…
The interphase model applied to the analysis of masonry structures
2014
Abstract Masonry material presents a mechanical response strongly dependent on the static and kinematic phenomena occurring in the constituents and at their joints. At the mesoscopic level the interaction between the units is simulated by means of specific mechanical devices such as the zero thickness interface model where the contact tractions and the displacement discontinuities are the primary static and kinematic variables respectively. In many cases the joint response depends also on internal stresses and strains within the interface layer adjacent to the joint interfaces. The introduction of internal stresses and strains leads to the formulation of the interphase model, a sort of enha…
Investigations on the linear friction welding process through numerical simulations and experiments
2012
Abstract Linear Friction Welding (LFW) is a solid-state joining process applied to non-axisymmetric components. LFW involves joining of materials through the relative motion of two components undergoing an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions. In the paper the authors present a designed and assembled laboratory fixture for LFW operations and the results of an experimental and numerical campaign aimed to weld steel parts. The dedicated fixture permitted to highlight the effect of the most important process parameters. Process conditions allowing ef…
The global cracking laws for a finite-element model of no-tension material
1992
Abstract For perfect no-tension materials (NRT) the validity of the local stability postulate of Drucker, well known in plasticity, has been assumed so far and utilized to derive the local cracking laws, which relate cracking strain states and stress states to each other. On this base a finite-element (FE) model with suitable constitutive behaviour for the single FE is presented. Classical FE approaches enforce the cracking laws at the Gauss points of the FEs. In this work it is shown that taking into account cracking strains, suitably modelled, over the whole domain of the FE and making use of an energy approach lead to general cracking laws describing the constitutive behaviour of the who…
Comparison of 2D versus 3D diffusion analysis at Nanowire Electrodes: Finite element analysis and experimental study
2021
In electroanalysis, finite element simulations of electrochemical processes occurring at electrodes are used to provide key insight into experimental design in relation to diffusion profiles and expected currents. The diffusion domain approach (DDA) offers a means of reducing a three dimensional design to two dimensions to ease computational demands. However, the DDA approach can be limited when basic assumptions, for example that all electrodes in an array are equivalent, are incorrect. Consequently, to get a more realistic view of molecular diffusion to nanoelectrodes, it is necessary to undertake simulations in 3D. In this work, two and three dimensional models of electrodes comprising o…
A physical-based constitutive model for surface integrity prediction in machining of OFHC copper
2017
International audience; Due to the rising interest in predicting machined surface integrity and sustainability, various models for metal cutting simulation have been developed. However, their accuracy depends deeply on the physical description of the machining process. This study aims to develop an orthogonal cutting model for surface integrity prediction, which includes a physical-based constitutive model of Oxygen Free High Conductivity (OFHC) copper. This constitutive model incorporates the effects of the state of stress and microstructure on the work material behavior, as well as a dislocation density-based model for surface integrity prediction. The coefficients of the constitutive mod…
Orthogonal cutting simulation of OFHC copper using a new constitutive model considering the state of stress and the microstructure effects
2016
International audience; This work aims to develop an orthogonal cutting model for surface integrity prediction, which incorporates a new constitutive model of Oxygen Free High Conductivity (OFHC) copper. It accounts for the effects of the state of stress on the flow stress evolution up to fracture. Moreover, since surface integrity parameters are sensitive to the microstructure of the work material, this constitutive model highlights also the recrystallization effects on the flow stress. Orthogonal cutting model is validated using experimental designed cutting tests. More accurate predictions were obtained using this new constitutive model comparing to the classical Johnson-Cook model.
Modelling of interference fits with taking into account surfaces roughness with homogenization technique
2013
International audience; The assembly technique by shrink fit is increasingly used today because it allows for the assembly of two pieces without any intermediary part simply by the tightening effect given by the difference in diameters of the two parts assembled. The definition of assemblies depends on calculation models available in the standard. They make very restrictive assumptions that limit the geometrical defects and the surface finish. It is increasingly common to use a finite element method to better adapt the model to the complex forms of industrial parts. However, the standard is limited with regard to the consideration of roughness which results in a loss of tightening. An easy …