Search results for "Flange"
showing 10 items of 11 documents
Condition-dependent effects of corticosterone on a carotenoid-based begging signal in house sparrows
2008
International audience; Begging is a complex display involving a variety of different visual and auditory signals. Parents are thought to use these signals to adjust their investment in food provisioning. The mechanisms that ensure the honesty of begging displays as indicators of need have been recently investigated. It has been shown that levels of corticosterone (Cort), the hormone released during the stress response, increase during food shortage and are associated with an increased begging rate. In a recent study in house sparrows, although exogenous Cort increased begging rate, parents did not accordingly adjust their provisioning rate. Here, we tested the hypothesis that Cort might af…
Axial Load Capacity of Cold Formed Pipe Flange Connection
2017
In this paper, a cold forming process is used where the connection between a pipe and a flange is created by means of radially expanding tool segments inside the pipe. The method is investigated with two purposes, to set up a robust procedure for the process that allows for connections to be made on site, and to set up finite element (FE) simulations that can capture the forces and deformations when pulling the pipe axially out of the flange. Experimental data and FE simulations are used to describe and understand the forces and deformations during the connection process. The rapid increase in radial stiffness experienced when the pipe comes in full circumferential contact with the flange i…
Network Arches: The World's Lightest Arch Bridges
2012
Summary Network arches have a tensile and a compressive flange with a web consisting of crossing hangers. Some of the hangers cross each other twice. The network can be seen as a very light, simply supported beam. There is little bending. There is a lot of tension in tie and hangers. The arches are well supported by hangers and wind bracing. Thus the buckling strength of the arch is high as long as few hangers relax. That is easiest to prevent when a concrete tie gives extra weight in the tie. The optimal shape of network arches is discussed. In two lane and two track network arches the biggest bending in the tie is usually the transverse bending half way between the arches. The optimal sha…
Dynamic railroad inspection using the laser-air hybrid ultrasonic technique
2006
Laser-Air Hybrid Ultrasonic Technique (LAHUT) combines laser generation with air-coupled detection of ultrasound. The technique is non-contact and has the characteristic of operating from remote distances. Acoustic wave laser-generation apparatus can be metres away from the interrogated surface while air-coupled detection standoff can be on the order of several centimetres. The technique has the unique capability of interrogating structural materials in their true industrial environment. Dynamic tests are performed on parts with complex geometry, limited accessibility and curved surfaces. Also, dark and rough finish surfaces, which significantly reduce the efficiency of optical detection te…
Laser-air hybrid ultrasonic technique for dynamic railroad inspection applications
2005
The Laser-Air Hybrid Ultrasonic Technique (LAHUT) combines laser generation with air-coupled detection of ultrasound. The technique is non-contact and has the characteristic of operating from remote distances. Acoustic wave laser-generation apparatus can be metres away from the interrogated surface, while air-coupled detection stand-off can be on the order of several centimetres. The technique has the unique capability of interrogating structural materials in their true industrial environment. Dynamic tests are performed on parts with complex geometry, limited accessibility and curved surfaces. Also, dark and rough finish surfaces, which significantly reduce the efficiency of optical detect…
Proof of concept of wayside railroad wheel inspection using a laser-air hybrid ultrasonic technique
2003
Non-destructive inspection of railroad wheels is performed in maintenance shops, where wheels are removed and inspected individually. No technique is yet available to the railroad industry to perform wayside inspections of wheels on a moving train. The characteristics of laser and air-coupled ultrasound are discussed to justify the use of a laser-air hybrid ultrasonic technique. Laser generation of ultrasound is combined with air-coupled detection to provide a flexible non-contact and remote technique that would enable the railroad industry to perform wayside inspections of moving railroad wheels. The present paper describes Proof of Concept set-up and results of the experiments performed a…
Numerical and experimental verification of new method for connecting pipe to flange by cold forming
2015
Abstract In this paper a new method of connecting pipe to flange without welding is presented. This method is a cold forming process that is based on plastic expansion/deformation of the pipe into a modified standard flange by use of a cold forming tool. The method is patented by Quickflange Technology AS and represents a highly feasible alternative to welding. The successful use of the method requires the ability to predict dimensional and stress/strain characteristics of the pipe and flange after the connection process in order to evaluate the connectivity to the adjacent flange as well as the leak tightness. In addition the ability to predict the process force during the connection proce…
Numerical analysis of a piezoelectric structural health monitoring system for composite flange-skin delamination detection
2013
Abstract In this paper, a piezoelectric based Structural Health Monitoring (SHM) system is proposed to detect skin/stiffener debonding and delamination cracks proper of laminated composite structures. The SHM system is analyzed by means of a boundary element code implemented in the framework of piezoelectricity. The multidomain technique, coupled with an interface spring model, is used to model laminated composite structures as well as the bonding between the host delaminated structure and the piezoelectric sensor. Static sensitivity analyses are firstly performed on a drop-ply delaminated structure in order to identify a suitable configuration for the sensor. Then, the dynamic electromecha…
Experimental Analysis of Passive Intermodulation at Waveguide Flange Bolted Connections
2007
[EN] In this paper, the generation of passive intermodulation at rectangular waveguide flange bolted connections is investigated. An exhaustive series of tests has been performed in order to provide understanding on the physics lying behind such a phenomenon. In particular, the intermodulation response of the system has been studied as a function of the applied torque to the flange screws. It has been found that, in some situations, the intermodulation response differs from its expected behavior. An interpretation of such discrepancies is given, and practical guidelines for the design of waveguide flanges free of passive intermodulation are provided as well.
Structural behaviour of hybrid glass beams with T cross-sections
2018
Abstract An experimental investigation regarding the flexural and the shear behaviour of glass beams with length 900, 1300, 1700 mm and T cross-section is presented and discussed. T cross-sections were obtained by assembling glass web and glass flange. Some specimens were also reinforced internally in the web with steel plates of thickness 6 mm and depth 25 and 50 mm placed at the bottom portion of the beams for the entire length of the beams themselves. Three specimens for each investigated series were tested in flexure focusing on the flexural and shear response through the determination of the load-deflection curves and the crack patterns at rupture identifying the effects of steel plate…