Search results for "Flexural Strength"
showing 10 items of 170 documents
Effect of UD carbon on the specific mechanical properties of glass mat composites for marine applications
2009
In this work the influence of a uniaxial carbon fabric layer on the mechanical performances of a glass mat/epoxy composite used for marine applications has been studied. All the structures have been made, at room temperature, by vacuum bagging technique. Tension and flexural tests have been carried out in order to evaluate the specific mechanical properties of the composite and to compare these with those of the marine aluminium alloy 6016-T4. The glass composites have higher specific strength but lower specific modulus than aluminium alloy. To increase the specific modulus of the composites, each layer of glass mat has been replaced with a layer of uniaxial carbon fabric. In addition, a s…
Effect of composite/amalgam thickness on fracture resistance of maxillary premolar teeth, restored with combined amalgam-composite restorations
2016
Background: Combined amalgam-composite restorations have been used through many years to benefit from the advantages of both dental amalgam and composite resin. Two variations have been mentioned for this technique, this study investigated the fracture resistance of maxillary premolar teeth with extended mesio-occluso-distal (MOD) cavities, restored with the two variations of combined amalgam-composite restorations. Material and Methods: Sixty intact extracted premolar teeth were randomly divided into 6 groups (G1-G6) of 10 teeth. G1; consisted of intact teeth and G2; consisted of teeth with MOD preparations were assigned as the positive and negative control groups respectively. Other exper…
Hand verification for flexural strength of existing R.C. floors subject to degradation phenomena
2015
Abstract In the present paper, a simplified model for hand verification of the flexural and shear strength of existing corroded T beams cast in place of lightened R.C. orthotropic slabs forming floors is presented and discussed. Diffused and pitting corrosion on steel bars, compressive concrete strength degradation and concrete bond strength degradation are included in the model. The original contribution of the paper is evaluation of the flexural and shear strength considering both the cases of strain compatibility and absence of compatibility and considering the main parameters governing the corrosion process. An arch-resistant model for the calculus of the flexural and shear strength of …
Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites
2006
In this paper, a cyanate ester (CE) matrix has been modified with polysulfone and an organic montmorillonite (Nanofil 919). The blend was thermally cured in presence of copper acetylcetonate and nonylphenol. The morphology of the cured materials was investigated by wide angle X-ray, scanning and transmission electron microscopy techniques. An intercalate structure of silicate platelets in the cyanate matrix has been obtained. Furthermore, results of thermogravimetric analysis (TGA) suggest that CE/PSF/Nanofil 919 nanocomposites have higher thermal stability than the neat resin, increasing the onset decomposition temperature. Flexural strength distributions of modified and neat cyanate matri…
Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
2016
The aim of this work was to study the effect of the plasma treatment on the behavior of composite structures reinforced with marble powder, obtained as processing waste in the “Custonaci” basin. Moreover, different filler amounts (i.e. 10%wt, 20%, 30% in weight) were investigated. For the mechanical characterization, tensile and flexural quasi-static tests, Charpy impact test, and dynamic mechanical thermal analysis (DMTA) were performed. For the thermal stability, thermogravimetric analysis was carried out. Finally, real density and fraction of voids were measured. It was observed that untreated marble powder, on one hand, increases tensile and flexural stiffness and improves thermal stabi…
A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites
2016
Abstract Several researchers have shown how sisal fibres possess remarkable tensile properties that yield them good candidates as reinforcement in biocomposite materials. This work aims to evaluate the effect of an eco-friendly and cost effective surface treatment method based on the use of commercial sodium bicarbonate (i.e. baking soda) on properties of sisal fibre and its epoxy composites. In particular, raw sisal fibres were treated with a 10%w/w of sodium bicarbonate solution for different periods (24, 120 and 240 h), at room temperature. Changes occurring in sisal fibres were characterized through scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric…
Sepiolite-reinforced epoxy nanocomposites: Thermal, mechanical, and morphological behavior
2010
A bisphenol A-based epoxy resin was modified with pristine sepiolite and an organically surface-modified sepiolite and thermally cured using two different curing agents: an aliphatic and a cycloaromatic diamine. The nanocomposites were characterized by dynamic mechanical analysis (DMA), rheology, thermogravimetric analysis (TGA), and electron microscopy. The initial sepiolite–epoxy mixtures show a better dispersion for the sepiolite-modified system that forms a percolation network structure. Mechanical properties have also been determined. The flexural modulus of the epoxy matrix slightly increases by the incorporation of the organophilic sepiolite. The flexural strength of the sepiolite-mo…
Effects of shape of transverse cross-section on the load carrying capacity of laminated glass columns
2014
Abstract In this paper simplified expressions for the calculus of the load carrying capacity of glass columns having rectangular, tee (T) and cruciform (X) transverse cross-sections are proposed and verified against available experimental data. Members with T and X cross-sections are obtained by gluing single multilayered glass panels. The expressions derived take into account of the: shape of the transverse cross-section (rectangular, T, and, X sections); buckling phenomenon (flexural and torsional); failure in the glued sections; long time effects. Case of full connections and absence of connections are considered to determine the range of variation of expressions adopted. The comparison …
Recyclable and Light-Adaptive Vitrimer-Based Nacre-Mimetic Nanocomposites.
2021
Nacre's natural design consists of a perfect hierarchical assembly that resembles a brick-and-mortar structure with synergistic stiffness and toughness. The field of bioinspired materials often provides attractive architecture and engineering pathways which allow to explore outstanding property areas. However, the study of nacre-mimetic materials should not be limited to the design of its architecture but ought to include the understanding, operation, and improvement of internal interactions between their components. Here, we introduce a vitrimer prepolymer system that, once integrated into the nacre-mimetic nanocomposites, cures and cross-links with the presence of Lewis acid catalyst and …
The Effect of Calcium on the Cohesive Strength and Flexural Properties of Low-Methoxyl Pectin Biopolymers.
2019
Abstract: Pectin binds the mesothelial glycocalyx of visceral organs, suggesting its potential role as a mesothelial sealant. To assess the mechanical properties of pectin films, we compared pectin films with a less than 50% degree of methyl esterification (low-methoxyl pectin, LMP) to films with greater than 50% methyl esterification (high-methoxyl pectin, HMP). LMP and HMP polymers were prepared by step-wise dissolution and high-shear mixing. Both LMP and HMP films demonstrated a comparable clear appearance. Fracture mechanics demonstrated that the LMP films had a lower burst strength than HMP films at a variety of calcium concentrations and hydration states. The water content also influe…