Search results for "Fluid Dynamic"

Contour-Variable Model of Constitutive Equations for Polymer Melts

2009

Based on a modified expression of the rate of the convective constraint release, we present a new contour-variable model of constitutive equations in which the non-uniform segmental stretch and the non-Gaussian chain statistical treatment of the single chain are considered to describe the polymer chain dynamics and the rheological behavior of an entangled system composed of linear polymer chains. The constitutive equations are solved numerically in the cases of steady shear and transient start-up of steady shear. The results indicate that the orientation and stretch, as well as the tube survival probability, have strong dependence on the chain contour variable, especially in the high-shear-…

Polymeric scaffolds prepared via Thermally Induced Phase Separation (TIPS): Tuning of structure and morphology

2007

Scaffolds suitable for tissue engineering applications were prepared by Thermally Induced Phase Separation (TIPS) starting from a ternary solution PLLA/dioxane/water. The experimental protocol consisted of three consecutive steps, a first quench from the homogeneous solution to an appropriate demixing temperature (within the metastable region), a holding stage for a given residence time and a final quench from the demixing temperature to a low temperature (within the unstable region). A large variety of morphologies, in terms of average pore size and interconnection, were obtained upon modifying the demixing time and temperature, owing to the interplay of nucleation and growth processes dur…

Adaptive Wetting-Adaptation in Wetting

2018

Many surfaces reversibly change their structure and interfacial energy upon being in contact with a liquid. Such surfaces adapt to a specific liquid. We propose the first order kinetic model to describe dynamic contact angles of such adaptive surfaces. The model is general and does not refer to a particular adaptation process. The aim of the proposed model is to provide a quantitative description of adaptive wetting and to link changes in contact angles to microscopic adaptation processes. By introducing exponentially relaxing interfacial energies and applying Young's equation locally, we predict a change of advancing and receding contact angles depending on the velocity of the contact line…

Magnetic Soret effect in a hydrocarbon based colloid containing surfacted Mn–Zn ferrite particles

1999

Abstract The Soret effect has been investigated in a hydrocarbon based magnetic fluid containing surfacted Mn 0.5 Zn 0.5 Fe 2 O 4 nanoparticles with a magnetic volume concentration of 2.3%. The magnetic fluid fills up a vertical diffusion column which consists of a flat vertical channel between two walls and two reservoirs at the ends of the channel. One wall of the channel is being heated while the another one is cooled, maintaining a temperature gradient over the channel's width that leads to separation of particles due to the Soret effect as well as the convective flow in the channel. The combination of the two mentioned effects brings up a measurable change of the concentration of magne…

Rheological behavior of a semirigid liquid crystal polymer

1993

The rheological behavior of liquid crystal polymers is still far from completely clarified from both experimental and theoretical points of view. In this paper, the shear flow and the non-isothermal elongation flow behavior of a semi-rigid liquid crystal copolyester is discussed. The viscosity strongly decreases when the test temperature is increased above the crystal-nematic transition temperature; below this temperature the viscosity is very high. The thermal history strongly affects the shear viscosity. The elongational flow behavior depends also on temperature. Above the crystal-nematic transition temperature and the mesophase is easily spinnable, whereas below this temperature, the spi…

Microfluidic Pumping by Micromolar Salt Concentrations

2017

An ion-exchange-resin-based microfluidic pump is introduced that utilizes trace amounts of ions to generate fluid flows. We show experimentally that our pump operates in almost deionized water for periods exceeding 24h and induces fluid flows of um/s over hundreds of um. This flow displays a far-field, power-law decay which is characteristic of two-dimensional (2D) flow when the system is strongly confined and of three-dimensional (3D) flow when it is not. Using theory and numerical calculations we demonstrate that our observations are consistent with electroosmotic pumping driven by umol/L ion concentrations in the sample cell that serve as 'fuel' to the pump. Our study thus reveals that t…

Controlling the wetting properties of the Asakura-Oosawa model and applications to spherical confinement.

2012

We demonstrate for the Asakura-Oosawa model and an extension of this model that uses continuous rather than hard potentials, how wetting properties at walls can be easily controlled. By increasing the interaction range of the repulsive wall potential acting on the colloids (while keeping the polymer-wall interactions constant) polymers begin to substitute colloids at walls and the system can be driven from complete wetting of colloids via partial wetting to complete wetting of polymers. As an application, we discuss the morphology and wetting behavior of colloid-polymer mixtures in spherical confinement. We apply the recently developed 'ensemble switch method' where the Hamiltonian is exten…

No-flow temperature and solidification in injection molding simulation

2011

The no‐flow temperature (NFT) is a parameter representing the rheological solidification temperature of a polymer. A polymer, during injection molding filling stage, can stop its flow because of its high viscosity, although it is not yet fully solidified by means of glass transition or crystallization. The NFT is used in most of injection molding simulation packages: with this simple parameter it is possible to reduce the errors deriving from viscosity extrapolation at relatively low temperatures. The viscosity measurements for polymers are usually carried out at high temperatures, and the viscosity models can fail in prediction at temperatures close to the glass transition or crystallizati…

1988

Phase diagrams were calculated for flowing solutions of polystyrene in trans-decahydronaphthalene assuming that the energy (Es) stored in the sheared state has to be added to the Gibbs energy of mixing; Es is computed from viscometric data (flow curves). The resulting phase diagrams exhibit two maxima in most of the cases instead of only one for the stagnant solutions. A comparison with experimental data (Part 1) shows that the calculated demixing behaviour agrees well for moderate shear rates and concentrations of the polymer. Deviations in the semidilute region, particularly for higher values, are a consequence of the fact that so far no reliable theoretical relation has been given for th…

Structure and phase transitions of a liquid crystalline polymer

1981

The structures, textures as well as thermodynamic properties of a side chain polymer exhibiting a liquid crystalline phase in addition to a partially crystalline state and the isotropic fluid state were investigated. Furthermore the kinetics of phase transitions between these states were analyzed. It was found that the properties of this polymer are intermediate between that of low molecular weight liquid crystals and common polymers. In particular it was observed that the relation between the liquid crystalline texture and the structure is different from that of low molecular weight liquid crystals and that the properties of the crystalline and liquid crystalline state depend strongly on t…