Search results for "Fluid Flow"
showing 10 items of 405 documents
Refitting of an eco-friendly sailing yacht: numerical prediction and experimental validation
2016
A 4.60 m sailing yacht, made with a flax fiber composite and wood, has been refitted with the aim of hull weight reduction and performance improvement during regattas. The first objective was obtained with a lightening of internal hull reinforcements while the second one with a reduction of the maximum beam, in order to minimize the longitudinal moment of inertia. The refitting was first simulated via CAD-FEM interaction to establish the feasibility of the procedure and to verify the structural integrity. The resulting hull was then instrumented with strain gauges and tested under typical rigging and sailing conditions. Results obtained by the numerical modeling and measured from experiment…
Spectroscopy of Alkali Atoms in Solid Matrices of Rare Gases: Experimental Results and Theoretical Analysis
2022
We present an experimental and theoretical investigation of the spectroscopy of dilute alkali atoms in a solid matrix of inert gases at cryogenic temperatures, specifically Rubidium atoms in a solid Argon or Neon matrix, and related aspects of the interaction energies between the alkali atoms and the atoms of the solid matrix. The system considered is relevant for matrix isolation spectroscopy, and it is at the basis of a recently proposed detector of cosmological axions, exploiting magnetic-type transitions between Zeeman sublevels of alkali atoms in a magnetic field, tuned to the axion mass, assumed in the meV range. Axions are one of the supposed constituents of the dark matter (DM) of t…
Constructal law optimization of a boiler
2017
The paper aims at the optimization of the design of a biomass boiler under the inspiration of the Constructal Law by Bejan. The boiler is of the smoke tubes typology, fuel being biomass pellets. The smoke tubes are 16 and are placed in a staggered configuration. A model is built in MATLAB environment, based on empirical correlations and the mean log temperature methodology. The analysis is based on the development of a wide parametric analysis that involves variations of diameters, numbers and positioning of the tubes. Results are based on the concept of the overall performance coefficient methodology and investigate both the pressure drops variation and the thermal power generated in the d…
Thermophoretic separation of ultrafine particles in ferrofluids in thermal diffusion column under the effect of an MHD convection
2000
The aim of the paper is to evaluate the Soret coeAcient ST of colloidal particles in ferrofluids from measurements of an unsteady particle separation in a flat thermodiAusion column. The column theory is modified taking into account MHD eAects of thermal convection aAected by a concentration buoyancy force. It is shown that the Hartmann eAect, not only in hydrocarbon based colloids but also in ionic magnetic fluids of relatively high electric conductivity, does not influence significantly the particle separation dynamics. From measurements, positive values of ST of surfacted particles in tetradecane based colloids are calculated. An anisotropy of the Soret eAect in the presence of a uniform…
Matched asymptotic solution for the solute boundary layer in a converging axisymmetric stagnation point flow
2007
Abstract A novel boundary-layer solution is obtained by the method of matched asymptotic expansions for the solute distribution at a solidification front represented by a disk of finite radius R 0 immersed in an axisymmetric converging stagnation point flow. The detailed analysis reveals a complex internal structure of the boundary layer consisting of eight subregions. The development of the boundary layer starts from the rim region where the concentration, according to the obtained similarity solution, varies with the radius r along the solidification front as ∼ln 1/3 ( R 0 / r ). At intermediate radii, where the corresponding concentration is found to vary as ∼ln( R 0 / r ), the boundary …
Low-Prandtl Number Natural Convection in Volumetrically Heated Rectangular Enclosures - III. Shallow Cavity, AR=0.25
2001
Abstract Natural convection in a volumetrically heated rectangular enclosure filled with a low-Prandtl number (Pr=0.0321) fluid was studied by direct numerical two-dimensional simulation. The enclosure had isothermal side walls and adiabatic top/bottom walls. The aspect ratio was 4 and the Grashof number Gr, based on conductive maximum temperature and cavity width, ranged from 3.79 × 104 to 1.26 × 109. According to the value of Gr, different flow regimes were obtained: steady-state, periodic, and chaotic. The first instability of the steady-state solution occurred at Gr≈3×105; the resulting time-periodic flow field consisted of a central rising plume and of convection rolls, periodically ge…
Effect of a finite external heat transfer coefficient on the Darcy-Bénard instability in a vertical porous cylinder
2013
Publised version of an article from the journal: Physics of Fluids. Copyright (2013) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. Article appears in Volume 25 issue 4 of the journal: http://dx.doi.org/10.1063/1.4799253 The onset of thermal convection in a vertical porous cylinder is studied by considering the heating from below and the cooling from above as caused by external forced convection processes. These processes are parametrised through a finite Biot number, and hence through third-kind, or Robin, temperature conditions imposed on the lower and upper b…
Soret coefficient of nanoparticles in ferrofluids in the presence of a magnetic field
1998
Experiments on a nonstationary separation of nanometer-sized Mn0.5Zn0.5Fe2O particles of hydrocarbon-based ferrocolloids in a flat vertical thermal diffusion column are performed. By using a modified separation theory which accounts for a one-dimensional mixed (thermal and concentration) convection in the column, the Soret coefficient of lyophilized nanoparticles from the separation curves are calculated. It is shown that in a zero magnetic field particles are transferring toward decreasing temperatures. The thermal diffusion ratio αT reaches a value αT≈+20. A significant influence of a uniform magnetic field B on particle separation is observed. If B is oriented along the temperature gradi…
MHD free convection in a liquid-metal filled cubic enclosure. II. Internal heating
2002
The buoyancy-driven magnetohydrodynamic flow in a liquid-metal filled cubic enclosure was investigated by three-dimensional numerical simulation. The enclosure was differentially heated at two opposite vertical walls, all other walls being adiabatic, and a uniform magnetic field was applied orthogonal to the temperature gradient and to the gravity vector. The Rayleigh number was 105 and the Prandtl number was 0.0321 (characteristic of Pb–17Li at 573 K). The Hartmann number was made to vary between 102 and 103 and the electrical conductance of the walls between 0 and ∞. The continuity, momentum and enthalpy transport equations, in conjunction with a Poisson equation for the electric potentia…
Efficient finite-difference scheme for solving some heat transfer problems with convection in multilayer media
2000
Abstract An efficient finite-difference method for solving the heat transfer equation with piecewise discontinuous coefficients in a multilayer domain is developed. The method may be considered as a generalization of the finite-volumes method for the layered systems. We apply this method with the aim to reduce the 3D or 2D problem to the corresponding series of 2D or 1D problems. In the case of constant piecewise coefficients, we obtain the exact discrete approximation of the steady-state 1D boundary-value problem.