Search results for "Fluid dynamics"
showing 10 items of 1005 documents
Permanent magnet bottom-stirred swirling flow in coaxial shallow cylindrical containers
2021
Here, an original rotating permanent magnet (RPM) system placed coaxially with the liquid metal container is studied as an effective means of generating flow in shallow cylinders for potential application in aluminum metallurgy (e.g., for ladle stirring and metal dosing). The studied RPM system generates volume force with strong axial variation and force maximum near the radial midpoint. The numerical and experimental data show that, in the shallow cylinder case, the azimuthal velocity follows the force radial distribution. The resulting velocity maximum occurs near the radial midpoint, unlike in the traditional rotating magnetic field (RMF) stirrer systems, where the velocity maximum occur…
CFD prediction of shell-side flow and mass transfer in regular fiber arrays
2021
Numerical simulations were conducted for fully developed, steady-state flow with mass transfer in fiber bundles arranged in regular lattices. The porosity was 0.5 and the Schmidt number 500. Several combinations of axial flow, transverse flow and flow attack angles in the cross-section plane were considered. The axial and transverse Reynolds numbers Rez , ReT were made to vary from 10(^−4) to 10(^2). Concentration boundary conditions, and the definition of an average Sherwood number, were addressed. Results for the hydraulic permeability were compared with the literature. Both hexagonal and square lattices were found to be hydraulically almost isotropic up to transverse flow Reynolds number…
Rotating magnetic dipole-driven flows in a conducting liquid cylinder
2021
Four configurations of a rotating magnetic dipole-driven turbulent flow in an electrically conducting liquid cylinder are considered by spectral direct numerical simulation. These configurations differ by parallel or perpendicular orientation of the dipole rotation vector with respect to the nearest surface of the cylinder or its axis. The rotating dipole generates electromagnetic force in a thin outer liquid layer facing it. A concentrated vortex is driven when the dipole rotation vector is perpendicular to the nearest surface. This vortex closely resembles the rotating disk-driven flow. When the dipole rotation vector is parallel to the nearest surface, then a distributed vortex occurs ak…
A study of turbulent heat transfer in curved pipes by numerical simulation
2013
Abstract Turbulent heat transfer in curved pipes was studied by numerical simulation. Two curvatures δ (pipe radius a/curvature radius c) were considered, 0.1 and 0.3; results were also obtained for a straight pipe (δ = 0) for comparison purposes. A tract of pipe 5 diameters in length was chosen as the computational domain and was discretized by finite volume multiblock-structured grids of ∼5.3 × 106 hexahedral cells. Fully developed conditions were assumed; the friction velocity Reynolds number was 500, corresponding to bulk Reynolds numbers between 12 630 and ∼17 350 according to the curvature, while the Prandtl number was 0.86 (representative of saturated liquid water at 58 bar). Simulat…
Investigation of flow and heat transfer in corrugated passages—I. Experimental results
1996
Abstract An experimental and numerical study of flow and heat transfer was conducted for a crossed-corrugated geometry, representative of compact heat exchangers including air preheaters for fossil-fuelled power plant. In this paper, we describe the method of applying thermochromic liquid crystals and true-colour image processing to give local Nusselt number distribution over the surface, and average Nu, both of quantitative reliability; a careful uncertainty analysis is also presented. Typical experimental results for heat transfer and pressure drop are presented and discussed for various geometries and Reynolds numbers, and are compared with literature data. Numerical predictions are disc…
Study on heat transfer coefficients during cooling of PET bottles for food beverages
2015
The heat transfer properties of different cooling systems dealing with Poly-Ethylene-Terephthalate (PET) bottles were investigated. The heat transfer coefficient (Ug) was measured in various fluid dynamic conditions. Cooling media were either air or water. It was shown that heat transfer coefficients are strongly affected by fluid dynamics conditions, and range from 10 W/m2 K to nearly 400 W/m2 K. PET bottle thickness effect on Ug was shown to become relevant under faster fluid dynamics regimes.
Mass transfer in ducts with transpiring walls
2019
Abstract The problem of mass transfer in ducts with transpiring walls is analysed: the concepts of “solvent” and “solute” fluxes are introduced, all possible sign combinations for these fluxes are considered, and relevant examples from membrane processes such as electrodialysis, reverse osmosis and filtration are identified. Besides the dimensionless numbers commonly defined in studying flow and mass transfer problems, new dimensionless quantities appropriate to transpiration problems are introduced, and their limiting values, associated with “drying”, “desalting” and “saturation” conditions, are identified. A simple model predicting the Sherwood number Sh under all possible flux sign combi…
Numerical observations of turbulence structure modification in channel flow over 2D and 3D rough walls
2015
Abstract The effects of wall roughness on turbulence structure modifications were explored by numerical experiments, carried out using Large Eddy Simulation techniques. The wall geometry was made using an archetypal artificial method, thus to achieve irregular two- and three-dimensional shapes. The proposed roughness shapes are highly irregular and are characterised by high and small peaks, thus it can be considered a practical realistic roughness. Their effects are analysed comparing the turbulence quantities over smooth, 2D and 3D rough walls of fully developed channel flow at relatively low friction Reynolds number Re τ = 395 . Both transitional and fully rough regimes have been investig…
Local thermal non-equilibrium effects in the Darcy–Bénard instability of a porous layer heated from below by a uniform flux
2013
Abstract The influence of the lack of thermal equilibrium between the solid phase and the fluid phase on the convective instability in a porous medium is studied. A horizontal layer with parallel and impermeable bounding walls is considered. The lower wall is assumed to be isoflux, and the upper wall isothermal. The basic motionless state is perturbed with small-amplitude disturbances, so that a linear analysis of the instability is carried out with a streamfunction-temperature formulation of the local balance equations. Then, the governing equations are solved for the normal modes, leading to an eigenvalue problem for the neutral stability. This eigenvalue problem is solved analytically, t…
Computerized dynamic fluid simulation (CFD) for measuring the influence of the cab deflector on the aerodynamics of trucks
2021
This paper refers to how the cab deflector of trucks can influence the aerodynamic coefficient. The first part of the paper includes some generalities taken from previous studies, regarding the types of solutions to improve aerodynamics for trucks. The second part of the paper is a more practical one and has two main chapters: modeling and simulation of modeled parts. In this sense, a truck and 3 cabin deflectors were schematically modeled in Catia v5. After assembly in the Catia v5 program, the impact of the cabin deflector was analyzed. Thus, a computerized dynamic fluid simulation (CFD) was performed using the specific module in Ansys. The simulation included the CFD analysis of the four…