Search results for "Foaming"

The role of EPS in fouling and foaming phenomena for a membrane bioreactor

2013

In contraposition to conventional activated sludge processes, the foaming phenomenon in membrane bioreactor (MBR) is still in its infancy. On the other hand, although several studies have been carried out for better understanding the fouling phenomenon in MBR there are still some gaps in the up-to-date knowledge. The extracellular polymeric substances (EPSs) may have a primary role in fouling and foaming phenomena which in turn can be crucial for MBRs. The aim of this study is to detect a possible relationship that EPSs may have with fouling and foaming in an MBR for wastewater treatment. Foaming phenomenon is monitored by performing specific foam-tests: Foam Power, Scum Index, Foam Rating …

Effect of chemical and biological surfactants on activated sludge of MBR system: Microscopic analysis and foam test

2015

Abstract A bench-scale MBR unit was operated, under stressing condition, with the aim of stimulating the onset of foaming in the activated sludge. Possible synergies between synthetic surfactants in the wastewater and biological surfactants (Extra-Cellular Polymeric Substances, EPSs) were investigated by changing C/N ratio. The growth of filamentous bacteria was also discussed. The MBR unit provided satisfactory overall carbon removal overall efficiencies: in particular, synthetic surfactants were removed with efficiency higher than 90% and 95% for non-ionic and ionic surfactants, respectively. Lab investigation suggested also the importance to reduce synthetic surfactants presence entering…

Antibacterial biopolymeric foams: Structure–property relationship and carvacrol release kinetics

2019

Abstract In this work, the feasibility of antibacterial biopolymeric foams containing carvacrol (CRV) for potential food packaging applications was investigated. Sodium bicarbonate (SB) was chosen as foaming agent and a commercial biodegradable polymer, Mater-Bi® (MB), as a matrix. MB/SB and MB/SB/CRV systems were prepared by melt mixing and the foaming process was conducted in a laboratory press. The influence of foaming agent and antibacterial additive content was investigated. The foamed samples were characterized through morphological analysis, mechanical tests and measurements of CRV release kinetics. Moreover, a mathematical model, i.e. power law model, was used to fit the release dat…

Foaming in membrane bioreactors: Identification of the causes

2012

Membrane bioreactors (MBRs) represent by now a well established alternative for wastewater treatment. Their increasing development is undoubtedly related to the several advantages that such technology is able to guarantee. Nevertheless, this technology is not exempt from operational problems; among them the foaming still represents an "open challenge" of the MBR field, due to the high complexity of phenomenon. Unfortunately, very little work has been done on the foaming in MBRs and further studies are required. Actually, there is not a distinct difference between conventional activated system and MBR: the main difference is that the MBR plants can retain most Extracellular Polymeric Substan…

Il foaming nei sistemi MBR: misure e valutazioni in-situ

2017

Nonostante la tecnologia MBR mostri un grande trend di crescita nel numero di applicazioni in piena scala, rimane ancora poco studiato il fenomeno della formazione di schiume all’interno dei reattori biologici che può provocare non pochi problemi gestionali degli impianti. Quest’aspetto fa sì che il fenomeno è oggi di crescente interesse scientifico, anche a seguito d’ipotesi secondo cui i fenomeni di foaming e fouling potrebbero reciprocamente influenzarsi, considerando i fattori comuni di influenza (EPS, microrganismi filamentosi idrofobici, fisiologia del fango). A tal riguardo viene anche mostrato che la ricerca scientifica condotta in Italia sull’argomento è molto ben avviata, stante l…

Il Foaming negli impianti MBR

2013

The foaming properties of camel and bovine whey: The impact of pH and heat treatment

2018

International audience; he effect of heat treatment (70 degrees C or 90 degrees C for 30 min) on the foaming and interfacial properties of acid and sweet whey obtained from bovine and camel fresh milk was examined. The maximum foamability and foam stability were observed for acid whey when compared to sweet whey for both milks, with higher values for the camel whey. This behavior for acid whey was explained by the proximity of the pI of whey protein (4.9-5.2), where proteins were found to carry the lowest negative charge as confirmed by the zeta potential measurements. Interfacial properties of acid camel whey and acid bovine whey were preserved at air water interface even after a heat trea…

Catalytic effect of transition metals (copper, iron, and nickel) on the foaming and properties of sugar-based carbon foams

2019

Abstract Recently, bio-based carbon foams have gained much interest in many chemical industry fields because of their unique structure and properties. This study provides new information on the effects of catalytic metals (iron, nickel, and copper) on the foaming process. Specifically, the effects of these catalysts on the density, foam growth, and cell size and then further on the pore size distribution and specific surface areas after the physical activation are considered. Furthermore, some of the activated sugar foams were used in adsorption tests using methylene blue as adsorbent. Results showed that the highest effect on foam density was obtained using the iron catalyst in the foaming…

Foaming in membrane bioreactor: identification of the causes

2012

The biological foaming was related to the metabolism of certain microorganisms that synthesize and excrete hydrophobic compounds. Recently, by the attention of many researchers the biological foaming in the MBR has attracted, because MBR foam has been also observed in the absence of foam-forming microorganisms, contrarily to conventional activated sludge systems. In this paper the authors investigate the role of EPS and filamentous bacteria analyzing different samples from different MBR pilot plants. In particular, in order to define the macroscopic features and the role of EPS and filamentous bacteria a modified Scum Index (MSI) test was applied. Further a multiple classification of SI was…

The role of EPS concentration in MBR foaming: analysis of a submerged pilot plant.

2010

Foaming in Membrane BioReactor (MBR) is a frequently discussed topic. Some authors reported that the phenomenon is due to filamentous organisms, like at Conventional Activated Sludge (CAS) plants. However, in recent years, other authors reported that the Extra-cellular Polymer Substances (EPSs) concentration is an important factor for controlling foam as well. Nevertheless, even if a number of MBR plants are affected by foaming, presently there are no suitable methods to evaluate the phenomenon. To facilitate the study of this controversial phenomenon in an MBR system, certain foam tests proposed in the past for CASPs were investigated. The results of the tests were able to adequately measu…