Search results for "Forced"
showing 10 items of 500 documents
Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling
2014
Abstract The structural behaviour of concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix under an uniaxial load was investigated. Medium size specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression, to investigate the efficiency of a p-Phenylene BenzobisOxazole (PBO) Fibre Reinforced Cementitious Mortar (FRCM) system in increasing both strength and ductility. The experimental results show that the confinement system adopted produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardeni…
Effect of FRP strengthening on the flexural behaviour of calcarenite masonry walls
2017
The use of fiber-reinforced polymers (FRP) for structural strengthening has become increasingly popular in recent years. Several applications of FRP have been proposed and applied, depending on the target of the technique, kind and/or material of the structural member. In particular, because of their great tensile strength, FRP materials are commonly used to enhance the out-of-plane behaviour of masonry walls, allowing to increase their strength, ductility and improving safety against overturning. For these reasons, FRP laminates are often applied in vulnerable ancient buildings in seismic areas to reinforce façades and walls with poor structural features. However, some issues arise when a…
R.C. columns strengthened by PBO-FRCM under axial force and bending moment
2017
Fabric-Reinforced Cementitious Matrix (FRCM) systems, also known as Textile Reinforced Concrete (TRC) are nowadays widely used as confining material to enhance both strength and deformation capacity of columns of seismic resistant r.c. frames. In the past, when carbon fiber was used in the textile, experimental results showed that the efficiency of the wrapping is limited by the connection between substrate and fiber, which is not as effective as when epoxy resins are used. To improve the strength of the connection between fibres and mortar binder in FRCM system, the use of p-Phenylene BenzobisOxazole (PBO), having a molecular structure capable of establishing chemical bonds with hydrated c…
Evaluation of interlaminar delaminations in titanium-graphite fibre metal laminates by infrared NDT techniques
2018
Abstract Fibre Metal Laminates (FMLs) describe a number of aerospace-grade layered structural materials where thin metal alloy foils are interleaved with Fibre Reinforced Polymer (FRP) plies. Such material hybridisation at the layer meso-scale poses a challenge for non-destructive testing (NDT). On the other hand, the need for NDT inspection of FMLs arises due to the potential development of interlayers disbonds, both during fabrication or in-service. This work describes the successful implementation of two Infrared-NDT approaches to evaluate a defected FML panel made of Titanium/Graphite (Ti-Gr). One technique is based on the modulation of the deployed heat from a low-cost halogen lamp, to…
Micro damage and cracking in fibre reinforced composites by a novel hybrid numerical technique
2020
Article number 0033974 AIP Incluida en Conference Proceedings 2309 The prediction of failure mechanisms in fibre-reinforced composite materials is of great importance for the design of composite engineering applications. With the aim of providing a tool able to predict and explain the initiation and propagation of damage in unidirectional fiber reinforced composites, in this contribution we develop a micromechanical numerical model based on a novel hybrid approach coupling the virtual element method (VEM) and the boundary element method (BEM). The BEM is a popular numerical technique, efficient and accurate, which has been successfully applied to interfacial fracture mechanics problems of f…
An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates
2007
Abstract The onset and propagation of interlaminar defects is one of the main damage mechanisms in composite materials. This is even more the case when considering layered materials comprising metallic laminae (typically Aluminium) and FRP laminae. Propagation of delamination mainly depends on the initial crack extension and its loading mode. This work presents some results of a combined analytical–numerical–experimental study on the onset and propagation mechanisms regarding interlaminar defects. Two cases have been analysed in particular, the first consisting of a glass-fibre reinforced epoxy resin laminate, and the second consisting of a hybrid laminate where a lamina of aluminium is lay…
Minimum bond length and size effects in FRP-substrate bonded joints
2009
The load transfer mechanism between the fibre-reinforced polymer (FRP) materials and the substrate plays a crucial role in the overall response of retrofitted structural members. The FRP–support material interface can be studied by using pull tests in which a reinforcement plate is bonded to a prism and subjected to a tensile force. The experimental results obtained regard the assembly (FRP strip-support block), then a central problem is how to carry out the interface constitutive laws and the related parameters. The principal objective of the present paper is to contrive a procedure which, for a fixed interface constitutive law, permits to derive the interface mechanical parameters from th…
Low-Prandtl Number Natural Convection in Volumetrically Heated Rectangular Enclosures - III. Shallow Cavity, AR=0.25
2001
Abstract Natural convection in a volumetrically heated rectangular enclosure filled with a low-Prandtl number (Pr=0.0321) fluid was studied by direct numerical two-dimensional simulation. The enclosure had isothermal side walls and adiabatic top/bottom walls. The aspect ratio was 4 and the Grashof number Gr, based on conductive maximum temperature and cavity width, ranged from 3.79 × 104 to 1.26 × 109. According to the value of Gr, different flow regimes were obtained: steady-state, periodic, and chaotic. The first instability of the steady-state solution occurred at Gr≈3×105; the resulting time-periodic flow field consisted of a central rising plume and of convection rolls, periodically ge…
Effect of a finite external heat transfer coefficient on the Darcy-Bénard instability in a vertical porous cylinder
2013
Publised version of an article from the journal: Physics of Fluids. Copyright (2013) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. Article appears in Volume 25 issue 4 of the journal: http://dx.doi.org/10.1063/1.4799253 The onset of thermal convection in a vertical porous cylinder is studied by considering the heating from below and the cooling from above as caused by external forced convection processes. These processes are parametrised through a finite Biot number, and hence through third-kind, or Robin, temperature conditions imposed on the lower and upper b…
One-dimensional Mixed MHD Convection
2006
The parallel, fully developed flow of an electrically conducting fluid between plane parallel walls under the simultaneous influence of a driving pressure head, buoyancy, and magnetohydrodynamic (MHD) forces is studied. The fluid is assumed to be internally heated and the flow is modeled as one-dimensional and incompressible, while the Boussinesq approximation is adopted for the buoyancy terms. Analytical solutions are obtained for temperature, velocity and electrical potential under different electrical boundary conditions, forced to natural convection intensity ratios and values of the magnetic induction. Generalized working charts are presented which synthetically describe the system''s …