Search results for "Form"

showing 10 items of 43464 documents

The Making of the New European Wind Atlas - Part 2: production and evaluation

2020

This is the second of two papers that document the creation of the New European Wind Atlas (NEWA). In Part 1, we described the sensitivity experiments and accompanying evaluation done to arrive at the final mesoscale model setup used to produce the mesoscale wind atlas. In this paper, Part 2, we document how we made the final wind atlas product, covering both the production of the mesoscale climatology generated with the Weather Research and Forecasting (WRF) model and the microscale climatology generated with the Wind Atlas Analysis and Applications Program (WAsP). The paper includes a detailed description of the technical and practical aspects that went into running the mesoscale simulati…

010504 meteorology & atmospheric sciencesMeteorology020209 energyMesoscale meteorologyTerrainParameterization02 engineering and technology01 natural sciencesWind speedWind speed0202 electrical engineering electronic engineering information engineeringWind atlasData flow modelSurface wind0105 earth and related environmental sciences:Enginyeria agroalimentària::Ciències de la terra i de la vida::Climatologia i meteorologia [Àrees temàtiques de la UPC]lcsh:QE1-996.5Física atmosféricalcsh:GeologyWeather Research and Forecasting ModelEnvironmental scienceNew European Wind AtlasSimulacio per ordinadorComputational methods in engineeringDownscalingModel
researchProduct

The making of the New European Wind Atlas - Part 1: Model sensitivity

2020

This is the first of two papers that document the creation of the New European Wind Atlas (NEWA). It describes the sensitivity analysis and evaluation procedures that formed the basis for choosing the final setup of the mesoscale model simulations of the wind atlas. The suitable combination of model setup and parameterizations, bound by practical constraints, was found for simulating the climatology of the wind field at turbine-relevant heights with the Weather Research and Forecasting (WRF) model. Initial WRF model sensitivity experiments compared the wind climate generated by using two commonly used planetary boundary layer schemes and were carried out over several regions in Europe. They…

010504 meteorology & atmospheric sciencesMeteorologyPlanetary boundary layer010505 oceanography020209 energylcsh:QE1-996.5Mesoscale meteorologyFísica atmosférica02 engineering and technology01 natural sciences7. Clean energyWind speedlcsh:GeologyBoundary layerRoughness length/dk/atira/pure/sustainabledevelopmentgoals/climate_action13. Climate actionWeather Research and Forecasting ModelWind resource assessmentWind atlasSDG 13 - Climate Action0202 electrical engineering electronic engineering information engineeringEnvironmental science0105 earth and related environmental sciences
researchProduct

The high overtone and combination levels of SF6 revisited at Doppler-limited resolution: A global effective rovibrational model for highly excited vi…

2017

Abstract Sulfur hexafluoride is an important prototypal molecule for modeling highly excited vibrational energy flow and multi quanta absorption processes in hexafluoride molecules of technological importance. It is also a strong greenhouse gas of anthropogenic origin. This heavy species, however, features many hot bands at room temperature (at which only 30% of the molecules lie in the ground vibrational state), especially those originating from the lowest, v 6 =1 vibrational state. Using a cryogenic long path cell with variable optical path length and temperatures regulated between 120 and 163 K, coupled to Synchrotron Radiation and a high resolution interferometer, Doppler-limited spectr…

010504 meteorology & atmospheric sciencesOvertoneInfrared spectroscopylow temperature01 natural sciences7. Clean energyHot bandSpectral linechemistry.chemical_compoundHexafluorideFar infraredhot bandRotation-vibration spectroscopy of SF 60103 physical sciencesSpectroscopy0105 earth and related environmental sciencesPhysics[PHYS]Physics [physics]Radiation[ PHYS ] Physics [physics]010304 chemical physicsRotational–vibrational spectroscopyAtomic and Molecular Physics and Opticschemistry13. Climate actiongreenhouse gasExcited stateinfrared absorptionAtomic physicstensorial formalismLong path cell
researchProduct

The giant inoceramid Platyceramus platinus as a high-resolution paleoclimate archive for the Late Cretaceous of the Western Interior Seaway

2018

Abstract Platyceramus platinus was a giant inoceramid bivalve that inhabited the outer shelf environments of the Western Interior Seaway (WIS) in North America. With axial heights typically exceeding 1 m, the shells of this species potentially serve as a unique high-resolution geochemical proxy archive for Late Cretaceous paleoclimate. Here we present the first sclerochronological investigation of P. platinus shells to evaluate the usefulness of this species as an archive of short-term (e.g., seasonal to inter-annual) paleoenvironmental variability. We analyzed the growth patterns, the stable oxygen (δ18O) and carbon (δ13C) isotope values of well-preserved P. platinus shell fragments from t…

010504 meteorology & atmospheric sciencesPlatyceramusbiologyδ18OPaleontologyWestern Interior Seaway010502 geochemistry & geophysicsbiology.organism_classification01 natural sciencesSeafloor spreadingNiobrara FormationCretaceousPaleontologyWater columnPaleoclimatologyGeology0105 earth and related environmental sciencesCretaceous Research
researchProduct

The ~2730 Ma onset of the Neoarchean Yilgarn Orogeny

2017

The timing of the onset of an orogeny is commonly constrained indirectly, because early orogenic structures are rarely exposed, or are overprinted. Establishing the onset of an Archean orogeny is considerably more challenging, because of the more fragmented geological record and the general lack of consensus about Archean geodynamics. We combine existing tectono-stratigraphic data with new structural and geophysical datasets to establish the onset of the Neoarchean Yilgarn Orogeny (Yilgarn Craton, Western Australia). We show that the surface of the c. 2960–2750 Ma deep-marine Yilgarn greenstone sequence was uplifted, eroded and unconformably overlain by a c. 2730 Ma, syntectonic clastic seq…

010504 meteorology & atmospheric sciencesPlutonArcheanGeochemistryOrogenyYilgarn CratonGeodynamics010502 geochemistry & geophysics01 natural sciencesUnconformityGeophysicsGeochemistry and PetrologyClastic rockShear zonePetrologyGeology0105 earth and related environmental sciencesTectonics
researchProduct

Approach to a water safety plan for recreational waters: disinfection of a drainage pumping station as an unconventional point source of fecal contam…

2020

Abstract In the context of the management of bathing water quality, the intermittent contamination of rainwater drainage pumps (unconventional point sources) could be controlled by peracetic acid disinfection. Thus, a field experimental study was carried out to set up a water safety plan, determining the monitoring parameters and the critical limit for corrective actions. With a 0.5 mg/l dosage, the average logarithmic microbial reduction was 0.50 ± 0.48 for Escherichia coli (EC) and 0.43 ± 0.54 for intestinal enterococci. Among the chemical and physical parameters that could be monitored in real time, the oxidation–reduction potential was the only one able to predict the microbial concentr…

010504 meteorology & atmospheric sciencesPoint source0208 environmental biotechnologybathing waters; qualitative microbial risk assessment (QMRA); unconventional point sources; water safety planEnvironmental engineering02 engineering and technologyManagement Monitoring Policy and LawEnvironmental Science (miscellaneous)01 natural sciencesunconventional point sources020801 environmental engineeringFecal coliformwater safety planWater safety planEnvironmental scienceDrainageRecreationbathing waters0105 earth and related environmental sciencesWater Science and Technologyqualitative microbial risk assessment (QMRA)
researchProduct

Spectropolarimetric evidence for a siphon flow along an emerging magnetic flux tube

2016

©2017 The American Astronomical Society. All rights reserved.We study the dynamics and topology of an emerging magnetic flux concentration using high spatial resolution spectropolarimetric data acquired with the Imaging Magnetograph eXperiment on board the sunrise balloon-borne solar observatory. We obtain the full vector magnetic field and the line of sight (LOS) velocity through inversions of the Fe i line at 525.02 nm with the SPINOR code. The derived vector magnetic field is used to trace magnetic field lines. Two magnetic flux concentrations with different polarities and LOS velocities are found to be connected by a group of arch-shaped magnetic field lines. The positive polarity footp…

010504 meteorology & atmospheric sciencesPolarity (physics)photosphere [Sun]FOS: Physical sciencesAstrophysicspolarimetric [Techniques]01 natural sciencesMethods: observational0103 physical sciencesSunriseAstrophysics::Solar and Stellar Astrophysicsobservational [Methods]010303 astronomy & astrophysicsSun: magnetic fieldsSolar and Stellar Astrophysics (astro-ph.SR)0105 earth and related environmental sciencesLine (formation)PhysicsSolar observatoryPolarity symbolsTechniques: polarimetricSun: photosphereAstronomy and AstrophysicsMagnetic fluxMagnetic fieldAstrophysics - Solar and Stellar AstrophysicsFlow (mathematics)magnetic fields [Sun]Space and Planetary Science
researchProduct

Plastic ingestion by pelagic and demersal fish from the North Sea and Baltic Sea

2015

Plastic ingestion by marine biota has been reported for a variety of different taxa. In this study, we investigated 290 gastrointestinal tracts of demersal (cod, dab and flounder) and pelagic fish species (herring and mackerel) from the North and Baltic Sea for the occurrence of plastic ingestion. In 5.5% of all investigated fishes, plastic particles were detected, with 74% of all particles being in the microplastic (<5mm) size range. The polymer types of all found particles were analysed by means of Fourier transform infrared (FT-IR) spectroscopy. Almost 40% of the particles consisted of polyethylene (PE). In 3.4% of the demersal and 10.7% of the pelagic individuals, plastic ingestion was …

010504 meteorology & atmospheric sciencesPolymersMackerelFlounder010501 environmental sciencesAquatic ScienceOceanography01 natural sciencesDemersal zoneEatingDemersal fishHerringSpectroscopy Fourier Transform InfraredMarine debrisAnimalsHumansIngestion14. Life underwater0105 earth and related environmental sciencesbiologyFishesPelagic zonebiology.organism_classificationPollutionFisheryPolyethyleneNorth SeaPlasticsWater Pollutants ChemicalEnvironmental MonitoringMarine Pollution Bulletin
researchProduct

Assessing optimal water quality monitoring network in road construction using integrated information-theoretic techniques

2020

Author´s accepted manuscript. The environmental impacts of road construction on the aquatic environment necessitate the monitoring of receiving water quality. The main contribution of the paper is developing a feasible methodology for spatial optimization of the water quality monitoring network (WQMN) in surface water during road construction using the field data. First, using the Canadian Council of Ministers of the Environment (CCME) method, the water quality index (WQI) was computed in each potential monitoring station during construction. Then, the integrated form of the information-theoretic techniques consists of the transinformation entropy (TE), and the value of information (VOI) we…

010504 meteorology & atmospheric sciencesRoad constructionOperations researchComputer science0207 environmental engineeringAnalytic hierarchy processTOPSIS02 engineering and technologyIdeal solutionMutual informationVDP::Teknologi: 500::Bygningsfag: 530::Konstruksjonsteknologi: 53301 natural sciencesValue of informationEntropy (information theory)Water quality020701 environmental engineering0105 earth and related environmental sciencesWater Science and TechnologyJournal of Hydrology
researchProduct

Modelling Complex Volume Shape Using Ellipsoid: Application to Pore Space Representation

2017

Natural shapes have complex volume forms that are usually difficult to model using simple analytical equations. The complexity of the representation is due to the heterogeneity of the physical environment and the variety of phenomena involved. In this study we consider the representation of the porous media. Thanks to the technological advances in Computed Topography scanners, the acquisition of images of complex shapes becomes possible. However, and unfortunately, the image data is not directly usable for simulation purposes. In this paper, we investigate the modeling of such shapes using a piece wise approximation of image data by ellipsoids. We propose to use a split-merge strategy and a…

010504 meteorology & atmospheric sciencesScale (ratio)Computer scienceComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISIONTangentApproximation algorithmContext (language use)02 engineering and technologyComputational geometry01 natural sciencesEllipsoid0202 electrical engineering electronic engineering information engineeringPiecewise020201 artificial intelligence & image processingRepresentation (mathematics)AlgorithmComputingMethodologies_COMPUTERGRAPHICS0105 earth and related environmental sciences2017 13th International Conference on Signal-Image Technology &amp; Internet-Based Systems (SITIS)
researchProduct