Search results for "Fuel Cell"
showing 10 items of 260 documents
Design and Modeling of an Interleaving Boost Converter with Quasi-Saturated Inductors for Electric Vehicles
2020
This paper is focused on the analysis and modeling of DC-DC boost converters in interleaving configuration exploiting inductors in the quasi-saturation region. The converter is designed to optimize the power density by minimizing the size of the inductors. A simulation study for electric vehicle applications is conducted analyzing the effects of duty cycle and temperature variation on the ripple of the input current giving, moreover, information on the performances and dynamics of the converter for further implementation and optimizations.
Microbial Fuel Cell with Ni–Co Cathode Powered with Yeast Wastewater
2018
Wastewater originating from the yeast industry is characterized by high concentration of pollutants that need to be reduced before the sludge can be applied, for instance, for fertilization of croplands. As a result of the special requirements associated with the characteristics of this production, huge amounts of wastewater are generated. A microbial fuel cell (MFC) forms a device that can apply wastewater as a fuel. MFC is capable of performing two functions at the same time: wastewater treatment and electricity production. The function of MFC is the production of electricity during bacterial digestion (wastewater treatment). This paper analyzes the possibility of applying yeast wastewate…
Solid-state compatibility of Ca:LaNbO4 with perovskite cathodes: Evidences from X-ray microspectroscopy
2022
The solid-state compatibility between calcium-doped lanthanum niobate and three perovskite cathode materials was investigated using two X-ray microbeam techniques, micro X-ray fluorescence and micro X-ray absorption spectroscopy. The cathode powders (lanthanum strontium ferrite, either cobalt or copper-doped, and lanthanum strontium cobaltite) in contact with the dense electrolyte pellet were annealed at 1150 degrees C for 12-144 h to simulate the effect of thermal stresses due to fabrication and long-term operation. As a result, several interdiffusion phenomena were then observed on the bilayer cross-sections: in particular, the chemical state and coordination environment of calcium, iron,…
Cu-B alloy - analysis of use possibility as fuel cell cathode catalyst
2016
In recent years there has been a development of non-conventional and renewable sources of energy. One such sources of energy are fuel cells. Fuel cells are ecological and high efficiency sources of electric energy. However, the use of fuel cells on a large scale is limited, mainly by the high cost of catalysts. Platinum is most commonly used as the catalyst. But due to the high price of platinum there’s a need for finding other catalysts. Replacement of platinum will contribute to the fast development of green energy sources. This paper presents a study of possibility of using Cu-B alloy as catalyst for oxygen electrode in fuel cells. Researches were done in glass vessel, on a copper electr…
MICROBIAL FUEL CELL WITH Cu-B CATHODE POWERING WITH WASTEWATER FROM YEAST PRODUCTION
2017
With the increasing standard of living, energy consumption increases as well. So, waste production, including wastewater, increases as well. One of the types of waste-water is wastewater from yeast industry. Wastewater from this industry has not only a high pollutants load but it is produced in great amounts as well. Technical devices that can accomplish the wastewater treatment and electricity production from wastewater is a microbial fuel cell. In microbial fuel cells activated sludge bacteria can be used for electricity production during wastewater treatment. The possibility of using the Cu-B alloy as cathode catalyst for microbial fuel cells to wastewater treatment of wastewater from ye…
Electricity Production from Yeast Wastewater in Membrane-Less Microbial Fuel Cell with Cu-Ag Cathode
2023
Wastewater has high potential as an energy source. Therefore, it is important to recover even the smallest part of this energy, e.g., in microbial fuel cells (MFCs). The obtained electricity production depends on the process rate of the electrodes. In MFC, the microorganisms are the catalyst, and the cathode is usually made of carbon material (e.g., with the addition of Pt). To increase the MFC efficiency (and reduce costs by reducing use of the noble metals), it is necessary to search the new cathode materials. In this work, the electricity production from yeast wastewater in membrane-less microbial fuel cells with Cu-Ag cathode was analyzed. In the first place, the measurements of the sta…
Microbial fuel cell with Ni-Co cathode
2017
Wraz ze wzrostem poziomu życia wzrasta zarówno zużycie energii, jak i ilość ścieków. Istnieje jednak możliwość produkcji energii z jednoczesnym oczyszczaniem ścieków. Urządzeniem, które może zrealizować to zadanie jest mikrobiologiczne ogniwo paliwowe. W ogniwach tego typu bakterie osadu czynnego wykorzystane są do produkcji energii podczas oczyszczania ścieków. Jednym z ograniczeń tego rozwiązania jest niska gęstość uzyskiwanego prądu. Możliwe jest jednak podwyższenie tego parametru przy wykorzystaniu odpowiedniego katalizatora elektrod. W artykule przedstawiono możliwość wykorzystania stopu Ni-Co jako katalizatora katody. Badania obejmowały przygotowanie elektrody oraz porównanie zmian st…
Wastewater treatment and electricity production in a microbial fuel cell with Cu–B alloy as the cathode
2019
The possibility of wastewater treatment and electricity production using a microbial fuel cell with Cu&ndash
Impact of operation condition on temperature distribution in single cell of polymer electrolyte fuel cell operated at higher temperature than usual
2016
For improving performance of the stationary Polymer Electrolyte Fuel Cell (PEFC) system, the cell operating temperature up to 90°C will be preferred in Japan during the period from 2020 to 2030. To understand the operation of the PEFC system under relatively high temperature conditions, detail heat and mass transfer analysis is required. The main focus of this study is to analyze the PEFC performance under operational conditions, such as initial operational temperature of cell (Tini), relative humidity of supply gas, and the cathode gas type, temperature distribution in a cell of PEFC (using Nafion membrane) under relatively higher operating temperature conditions. The in-plane temperature …
Design and characterization of bi-functional electrocatalytic layers for application in PEM unitized regenerative fuel cells
2010
Abstract Results concerning the development and characterization of bi-functional electrocatalytic layers for application in unitized regenerative fuel cells (URFCs) based on proton exchange membrane (PEM) technology are reported. Carbon-supported hydrophobic (10 wt.% of PTFE) Pt catalysts (40 wt.% of Pt), and Pt and Ir black powders of large specific areas have been synthesized. Their structure, morphology and electrochemical properties have been investigated using SEM, TEM, XRD analysis, and by measurements of polarization curves and cyclic voltammograms. Current–voltage curves have been recorded during water electrolysis and H 2 /O 2 fuel cell experiments to evaluate their performances a…