Search results for "Fuel Cells"
showing 10 items of 83 documents
Development of anode supported Single Chamber Solid Oxide Fuel Cells running in air/methane mixture
2013
International audience; Single Chamber Solid Oxide Fuel Cells (SCFC) show a growing interest and are the concern of more and more papers. In such device, anode and cathode are ex-posed to a gas mixture of fuel (hydrocarbon) and oxidant (air) so that no more sealing with electrolyte is necessary. Their operating principle is based on the different catalytic activities of anode and cathode: Ideally, the anode has to be active for the oxidation of fuel while the cathode should present only a strong electro-activity for oxygen reduction. In this paper, we present the development of an anode supported SCFC device running in air/methane mixture characterized by their volume ratio, Rmix = CH4/O2.
PEM FC Single Cell Based on a 3-D Printed Plastic Housing and Experimental Validation with the Mathematical Model
2018
Abstract This paper presents the design, modelling, and testing of a PEM single fuel cell based on the use of 3D printing. The design of the housings was made of SolidWorks, while MATLAB/SIMULINK were used to model performance. The fabricated cell performed satisfactorily with no leaks of gas, showing that the 3D printing method can be used in the additive manufacturing of fuel cells thus leading to significant cost savings.
Cu-B alloy - analysis of use possibility as fuel cell cathode catalyst
2016
In recent years there has been a development of non-conventional and renewable sources of energy. One such sources of energy are fuel cells. Fuel cells are ecological and high efficiency sources of electric energy. However, the use of fuel cells on a large scale is limited, mainly by the high cost of catalysts. Platinum is most commonly used as the catalyst. But due to the high price of platinum there’s a need for finding other catalysts. Replacement of platinum will contribute to the fast development of green energy sources. This paper presents a study of possibility of using Cu-B alloy as catalyst for oxygen electrode in fuel cells. Researches were done in glass vessel, on a copper electr…
Impact of operation condition on temperature distribution in single cell of polymer electrolyte fuel cell operated at higher temperature than usual
2016
For improving performance of the stationary Polymer Electrolyte Fuel Cell (PEFC) system, the cell operating temperature up to 90°C will be preferred in Japan during the period from 2020 to 2030. To understand the operation of the PEFC system under relatively high temperature conditions, detail heat and mass transfer analysis is required. The main focus of this study is to analyze the PEFC performance under operational conditions, such as initial operational temperature of cell (Tini), relative humidity of supply gas, and the cathode gas type, temperature distribution in a cell of PEFC (using Nafion membrane) under relatively higher operating temperature conditions. The in-plane temperature …
Insights into the Dynamics of Grotthuss Mechanism in a Proton-Conducting Chiral bioMOF
2016
Proton conduction in solids attracts great interest, not only because of possible applications in fuel cell technologies, but also because of the main role of this process in many biological mechanisms. Metal–organic frameworks (MOFs) can exhibit exceptional proton-conduction performances, because of the large number of hydrogen-bonded water molecules embedded in their pores. However, further work remains to be done to elucidate the real conducting mechanism. Among the different MOF subfamilies, bioMOFs, which have been constructed using biomolecule derivatives as building blocks and often affording water-stable materials, emerge as valuable systems to study the transport mechanisms involve…
Structural analysis, phase stability and electrochemical characterization of Nb doped BaCe0.9Y0.1O3−x electrolyte for IT-SOFCs
2012
Abstract To improve the chemical stability of high temperature proton conductors based on barium cerate, electrolyte powders doped with different amounts of niobium were synthesized by the citrate–nitrate auto-combustion method. Pure single phases of BaCe 0.9− x Nb x Y 0.1 O 3− x (BCYN, 0.03 ≤ x ≤ 0.12) were obtained by thermal treatment at 1000 °C. Sintering at 1450 °C for 10 h produced dense pellets. X-ray absorption spectroscopy allowed to define the dopant ion insertion site and the co-dopant valency. Treatments in pure CO 2 atmosphere at 700 °C for 3 h and subsequent XRD analysis were carried out to probe the chemical stability of the produced electrolytes. The influence of the prese…
Possibility of fuel cell powering with grape seed oil
2015
In the last few years alternative energy sources have been fast developing. One of technical device using these sources is fuel cell. Fuel cell performs direct conversion of chemical fuel into electrical energy, without combustion and characterized by high efficiency. Most commonly fuel cells are powered by hydrogen. However, problems with the storage of hydrogen are the reason for the search of new fuels for fuel cells. Due to development of the renewable energy sources, the powering of high efficiency power sources with bio-fuels is very important. Vegetable oil is an alternative fuel for Diesel engines and for heating oil burners. Powering high efficiency power sources (like fuel cells) …
Continuous monitoring of hydrogen and carbon dioxide at Mt Etna
2013
article i nfo This study assessed the use of an H2 fuel cell as an H2-selective sensor for volcano monitoring. The resolution, repeatability, and cross-sensitivity of the sensor were investigated and evaluated under known laboratory conditions. A tailor-made device was developed and used for continuously monitoring H2 and CO2 at Mt Etna throughout 2009 and 2010. The temporal variations of both parameters were strongly correlated with the evolution of the volcanic activity during the monitoring period. In particular, the CO2 flux exhibited long-term variations, while H2 exhibited pulses immediately before the explosive activity that occurred at Mt Etna during 2010.
An Overview of Functionalized Graphene Nanomaterials for Advanced Applications
2021
Interest in the development of graphene-based materials for advanced applications is growing, because of the unique features of such nanomaterials and, above all, of their outstanding versatility, which enables several functionalization pathways that lead to materials with extremely tunable properties and architectures. This review is focused on the careful examination of relationships between synthetic approaches currently used to derivatize graphene, main properties achieved, and target applications proposed. Use of functionalized graphene nanomaterials in six engineering areas (materials with enhanced mechanical and thermal performance, energy, sensors, biomedical, water treatment, and c…
DFT modelling of oxygen adsorption on the Ag-doped LaMnO3 (001) surface
2019
This study was partly financed by the State Education Development Agency of the Republic of Latvia via the Latvian State Scholarship (A.A.) and Latvia-Ukraine Project (Grant LV-UA/2018/2 to E.K.). The work of T.I. is performed under the state assignment of IGM SB RAS. Also, this research was partly supported by the Ministry of Education and Science of the Republic of Kazakhstan in the framework of the scientific and technology Program BR05236795 ‘‘Development of Hydrogen Energy Technologies in the Republic of Kazakhstan’’. The authors thank M. Sokolov for technical assistance and valuable suggestions.