Search results for "GLASS"
showing 10 items of 1153 documents
A multivariate statistical approach of X-ray fluorescence characterization of a large collection of reverse glass paintings
2019
We present an X-ray fluorescence spectroscopy (XRF) study combined with a multivariate approach that allow to detect compositional differences and similarities among the glass supports of a large set of reverse glass paintings belonging to the collection of the Mistretta museum. Reverse painting on glass is an old decorative technique used since the Roman time consisting in applying a cold paint layer on the reverse side of a glass support. The collection shows a large spreading of provenience and dating of the items. In consideration of the current classification solely based on stylistic criteria, we applied a multivariate analysis on the XRF measurements data set to find a more objective…
Philip Glass: Company; "Low" Symphony / Shostakovich: La nuova Babilonia (suite) / Nino Rota: La strada (suite dal balletto)
1994
L'articolo è stato realizzato in occasione della prima esecuzione italiana della "Low" Symphony di Philip Glass (Gibellina, 21 giugno 1994) e traccia un breve profilo del compositore, soffermandosi sulla genesi e i caratteri dell'opera.
Influence of data treatment on the shape of 2H NMR T1 curves
1993
A new interpretation of 2H T1 data of glass-forming systems in the range of the range of the caloric glass transition temperature has been proposed. It is shown that with the traditional treatment of the data the timescale of structural relaxation has an influence on the observed spin-lattice relaxation times. Avoiding this problem with a different treatment of the experimental data, it is possible to compare the 2H T1 data directly with corresponding 1H data.
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate
2012
Abstract Polycarbonate/silica nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of polycarbonate (PC) was investigated. Clusters of silica nanoparticles were well dispersed in the polycarbonate whose structure remained amorphous. NMR results showed intermolecular interactions involving the carbonyl groups of different polymeric chains which did not affect the intramolecular rotational motions. The presence of the lowest silica content showed a decrease in the storage and loss moduli below the glass transition temperature, pro…
Incorporation of Silica Nanospherical Particles in Epoxy–Amine Crosslinked Materials II. Dynamic Mechanical Measurements of Epoxy Matrix-Silica Nanoc…
2009
The mechanical strengths of epoxy composites reinforced with silica nanospheres, unfunctionalised or functionalised with either amine or epoxy groups, increase up to a proportion of 5 wt.% of filler, as reflected in a study of the shear storage modulus carried out in dynamic mechanical analysis. This improvement is observed in both glassy and rubbery states, moderately affecting the glass transition temperature of the material. From this percentage of strengthening substance the mechanical properties begin to deteriorate, but keeping (up to 10 wt.% of strengthening material), a greater storage modulus in shear than that of the pristine epoxy resin. A trend can be discerned as the percentag…
Dynamic Mechanical Measurements of Epoxy Matrix-Silica Nanocomposites II
2009
The mechanical properties of epoxy-silica nanocomposites have been studied; the silica nanosphere fillers used were un-functionalised, functionalised with amine, with epoxy, or a mixture of both kinds. Dynamic mechanical analysis measurements revealed an increase in the shear storage modulus, for all samples with a filler content of 3–5%. Improvements were observed in the glassy and rubbery states, without affecting the glass transition temperature of the materials. Above these strengthening percentages, the mechanical properties began to deteriorate, but in all cases they remained superior to those of the pristine epoxy resin. For low strengthening percentages, samples reinforced with bot…
Ordered mesoporous silicas as host for the incorporation and aggregation of octanuclear nickel(ii) single-molecule magnets: a bottom-up approach to n…
2006
Silica-based mesoporous materials have been employed as the support host for a suitably designed small octanuclear nickel(II) guest complex with a moderately anisotropic S = 4 ground spin state (D = −0.23 cm−1), which behaves as a single-molecule magnet at low temperature (TB = 3.0 K). Both unimodal MCM-41 and bimodal UVM-7 porous silica provide appropriate template conditions for the incorporation and aggregation of the Ni8 complex precursor into larger complex aggregates, showing slow relaxation of the magnetization at higher blocking temperatures than the crystalline material. By playing with the initial complex vs. silica concentration, two series of samples with varying complex loading…
Selenium Nanoparticles Synthesized via a Facile Hydrothermal Method
2012
Crystalline selenium nanostructures were synthesized from the reaction of a GeSe3 glass with water at 85°C for 144 hours. The hydrolysis of the Ge-Se bonds releases Se fragments in the solution where they form a colloidal suspension of amorphous nanospheres. The later evolve toward a more stable hexagonal phase (trigonal) leading to the anisotropic growth of one-dimensional monocrystalline structures. Filaments, bars and tubes of monocrystalline trigonal selenium were obtained with diameters ranging from 10 nm to 1 µm and aspect ratio up to 180. This simple process in aqueous solution opens new perspectives for the synthesis of 1D nanoparticles of trigonal selenium at large scale.
Influence of cerium content and heat treatment on Ce:YAG@glass wool nanostructures
2019
The paper reports the influence of cerium content and heat treatment on composition, structural features and optical properties of nanostructures constituted by a layer of Ce:YAG nanoparticles on glass wool (Ce:YAG@GW). The Ce:YAG@GW nanostructures were obtained embedding the glass wool (GW) in a gel-like precursor and calcining at 800 and 900 °C. Gel-like precursor of urea glass route (UGR) method has been used to prepare both nanostructures and Ce:YAG nanoparticles prepared as references. Structural properties were investigated by using X-ray diffraction (XRD) and infrared spectroscopy (IR). Results showed that the composition of the final products strongly depends both on the cerium cont…
Electrochemical tomato (Solanum lycopersicum L.) characterisation using contact probe in situ voltammetr
2015
[EN] An in situ electrochemical contact probe methodology for characterising tomato samples is proposed. It is based on the record of the voltammetric response of antioxidant compounds when glassy carbon electrodes are inserted into the pericarp of fresh tomato specimens cut in half. The absence of pretreatment and in situ sampling avoid sample contamination and the oxidation of air-sensitive compounds thus increasing the representativity of the analytical data relative to conventional electrochemical analysis. Characteristic voltammetric responses recorded for such compounds, including rutin, chlorogenic acid, naringenin, naringenin chalcone and ascorbic acid have been obtained. A positive…