Search results for "Galvanic deposition"

Brushite/Hydroxyapatite Coatings obtained by galvanic deposition on 316L Stainless Steel

2016

Hydroxyapatite (HA, Ca10(PO4)6(OH)2) is a basic calcium phosphate mineral with chemical composition similar to that of bones and teeth. Owing to this peculiarity HA is a biocompatible material of high medical interest. Unfortunately, it possesses poor mechanical properties, because is brittle, has a low fracture resistance and a poor wear resistance. For these reasons, in the last years the research was been focused on the use of HA as a coating of another biomaterial that acts as support. The best choice is that to use a substrate that must be bionert and mechanically stable, such as 316L stainless steel (316LSS). This is useful for biomedical implants, because of its excellent biocompatib…

Fabrications of Nanostructures And Nano-Structured Devices Using Electrochemical Methods

2013

Galvanic deposition of Chitosan-AgNPs as antibacterial coating

Thanks to mechanical properties similar human bones, metallic materials represent the best choice for fabrication of orthopedic implants. Although metals could be widely used in the field of biomedical implants, corrosion phenomena could occur, causing metal ions releasing around periprosthetic tissues leading, in the worst cases, to the development of infections. In these cases, patients need prolonged antibiotic therapies that may cause bacterial resistance. Preventing bacterial colonization of biomedical surfaces is the key to limiting the spread of infections. Antibacterial coatings have become a very active field of research, strongly stimulated by the increasing urgency of identifying…

Composite Coatings of Chitosan and Silver Nanoparticles Obtained by Galvanic Deposition for Orthopedic Implants

2022

In this work, composite coatings of chitosan and silver nanoparticles were presented as an antibacterial coating for orthopedic implants. Coatings were deposited on AISI 304L using the galvanic deposition method. In galvanic deposition, the difference of the electrochemical redox potential between two metals (the substrate and a sacrificial anode) has the pivotal role in the process. In the coupling of these two metals a spontaneous redox reaction occurs and thus no external power supply is necessary. Using this process, a uniform deposition on the exposed area and a good adherence of the composite coating on the metallic substrate were achieved. Physical-chemical characterizations were car…

Hydroxyapatite/Chitosan/Collagen coatings through galvanic coupling

In this work, the attention was focused on Hydroxyapatite/ Chitosan/Collagen composite as biocoatings for application in orthopaedic devices. Hydroxyapatite was selected for its osteoconductivity due to its chemical structure similar to bones. Collagen has the same function since 90-95% of bone matrix is constituted of collagen fibers. Furthermore, chitosan are largely used yet in medical field (e.g. antibacterial agent or drug deliver) and in this work were used to create a synergic interaction with hydroxyapatite and collagen to increase the strength and bioactivity of coating. Coatings were fabricated by galvanic deposition process that has different advantages an it does not require ext…

Galvanic Deposition of Calcium Phosphate/Bioglass Composite Coating on AISI 316L

2023

Calcium phosphate/Bioglass composite coatings on AISI 316L were investigated with regard to their potential role as a beneficial coating for orthopedic implants. These coatings were realized by the galvanic co-deposition of calcium phosphate compounds and Bioglass particles. A different amount of Bioglass 45S5 was used to study its effect on the performance of the composite coatings. The morphology and chemical composition of the coatings were investigated before and after their aging in simulated body fluid. The coatings uniformly covered the AISI 316L substrate and consisted of a brushite and hydroxyapatite mixture. Both phases were detected using X-ray diffraction and Raman spectroscopy.…

In vitro corrosion and biocompatibility of brushite/hydroxyapatite coatings obtained by galvanic deposition on 316LSS

2018

Corrosion behavior and cytotoxicity was reported for mixed brushite (BS)/hydroxyapatite (HA) coatings deposited on 316LSS substrate through a displacement reaction. Corrosion tests, carried out in a simulated body fluid, showed that in comparison with bare 316L, coating shifts Ecorrto anodic values and reduces icorreven if oscillations were observed, which were explained in terms of the chemical interactions at the solid/liquid interface. Cell biocompatibility of the coating was investigated through osteoblastic cell line MC3T3-E1, evidencing the absence of any cytotoxicity Taken together, the results show that galvanic deposition is a simple and cost-effective method for producing bioactiv…

Behavior of Calcium Phosphate–Chitosan–Collagen Composite Coating on AISI 304 for Orthopedic Applications

2022

Calcium phosphate/chitosan/collagen composite coating on AISI 304 stainless steel was investigated. Coatings were realized by galvanic coupling that occurs without an external power supply because it begins with the coupling between two metals with different standard electrochemical potentials. The process consists of the co-deposition of the three components with the calcium phosphate crystals incorporated into the polymeric composite of chitosan and collagen. Physical-chemical characterizations of the samples were executed to evaluate morphology and chemical composition. Morphological analyses have shown that the surface of the stainless steel is covered by the deposit, which has a very r…

Nanostructured anode material for Li-ion battery obtained by galvanic process

2016

This work focused on the synthesis and characterization of nanostructured lead hydroxide chloride (PbOHCl) that is an innovative anode material for lithium-ion batteries (LIBs). In particular, we have obtained nanostructures of mixed PbOHCl and lead metal, directly into the pores of a commercially available alumina membrane, acting as template. The process was based on galvanic displacement reaction that was carried out in a two-compartment electrochemical cell without the use of an external power supply. This simple and cheap procedure gives regular array of Pb/PbOHCl composite nanowires. To obtain nanostructured electrodes is a significant result because, it’s well known that nanostructur…

Pb-PbOHCl Composite Nanowires Synthesized by Galvanic Deposition in Template

2019

In this paper, we report a detailed study on the synthesis of composite nanowires of Pb-PbOHCl via galvanic deposition into the pores of a membrane acting as a template. PbOHCl deposition quantitatively occurs as the solution pH exceeds the value of about 4.12. Simultaneously, owing to the galvanic coupling, electro-deposition of lead occurs, so composite nanowires were formed. The role of different parameters controlling the kinetic evolution of the process, such as oxygen bubbling, solution pH, surface area and type of sacrificial anode were investigated one at a time. The results suggest that every modification accelerating the alkalization of the solution inside the template pores favor…