Search results for "General Energy"
showing 10 items of 644 documents
Amplified Spontaneous Emission Properties of Solution Processed CsPbBr3 Perovskite Thin Films
2017
Metal halide perovskites are currently emerging as highly promising optoelectronic materials. It has been recently demonstrated that fully inorganic solution processed CsPbBr3 perovskite thin films show good electroluminescence properties combined with high thermal stability. In this work, we investigate in details the amplified spontaneous emission (ASE) properties of CsPbBr3 perovskite thin films, as a function of the temperature and the trap density, modified by changing the CsBr-PbBr2 precursor concentration. ASE is observed in samples from both CsBr-rich solution (low trap density) and equimolar solution (higher trap density), up to about 150 K, with a minimum threshold of 26 and 29 mu…
Highly Active Photocatalytic TiO2 Powders Obtained by Thermohydrolysis of TiCl4 in Water
2009
Highly active photocatalytic TiO2 samples were synthesized by thermohydrolysis of TiCl4 in water at 100 °C. Rutile, binary mixtures of anatase and rutile or anatase and brookite or ternary mixtures of anatase, brookite, and rutile were obtained depending on the TiCl4/H2O ratio. Rietveld refinements were employed to evaluate the crystalline phases and composition of the mixtures. The effect of the aging time on the phase composition was also studied. The band gap values of the samples were obtained by the diffuse reflectance spectra. The position of the flat band potentials of anatase, brookite, and rutile was determined measuring the photovoltage as a function of the suspension pH. From the…
Optical and Acoustic Vibrations Confined in Anatase TiO2 Nanoparticles under High-Pressure
2014
International audience; The effect of an applied high pressure on the optical and acoustic vibrations of small anatase TiO2 nanoparticles is studied using Raman scattering. All the Raman peaks show a significant variation of their frequency with pressure, except for the low-frequency peak which is due to acoustic vibrations confined in the nanoparticles. These variations (or lack thereof) are compared to first-principles calculations of the stiffness tensor and phonons of bulk anatase TiO2 as a function of pressure. In particular, the variation of the shape of the low-frequency peak is explained by the increase of the elastic anisotropy of anatase TiO2 as pressure is increased.
Nature of Interactions at the Interface of Two Water-Saturated Commercial TiO2 Polymorphs
2013
Two commercial TiO2 samples, a 100% anatase and a 100% rutile, were used for the fast field cycling NMR experiments. The results showed a different behavior between the different samples. In particular, water molecules were unbonded to the solid surface for the rutile sample, whereas they appeared to chemically interact with the surface through H-bond formation with the anatase sample. The above findings accord with the generally lower activity of rutile with respect to anatase reported in literature for photocatalytic oxidation reactions in water. The difficulty of water to interact with rutile surface, indeed, could hinder the formation of OH radicals, which are the most important oxidant…
Influence of Amorphous TiO2-x on Titania Nanoparticle Growth and Anatase-to-Rutile Transformation
2012
Amorphous TiO2-x formed together with precursors and anatase nuclei, during TiCl4 hydrolysis at soft conditions, influences both crystal growth and phase stability. The highly defective nanoparticles of anatase grow by reaction of their basic hydroxyls with acidic ones of TiO2 precursor species. The growth of anatase crystals, however, is affected by their interactions with simultaneously formed amorphous TiO2-x which increasingly covers the particles hindering the anatase-precursor contact. The interactions among anatase and amorphous and precursor components have been studied by H-1-MAS (magic angle spinning) NMR spectroscopy. The interaction between acid and basic hydroxyls favors the fo…
Removal of Surface Oxygen Vacancies Increases Conductance Through TiO(2) Thin Films for Perovskite Solar Cells
2019
[Image: see text] We report that UV–ozone treatment of TiO(2) anatase thin films is an efficient method to increase the conductance through the film by more than 2 orders of magnitude. The increase in conductance is quantified via conductive scanning force microscopy on freshly annealed and UV–ozone-treated TiO(2) anatase thin films on fluorine-doped tin oxide substrates. The increased conductance of TiO(2) anatase thin films results in a 2% increase of the average power conversion efficiency (PCE) of methylammonium lead iodide-based perovskite solar cells. PCE values up to 19.5% for mesoporous solar cells are realized. The additional UV–ozone treatment results in a reduced number of oxygen…
Tailoring the Structural, Optical, and Photoluminescence Properties of Porous Silicon/TiO2 Nanostructures
2015
The structural, optical, and photoluminescence properties of porous silicon (PSi)/titanium dioxide (TiO2) nanostructures were investigated. PSi structures consisting of macro- and mesoporous layers were fabricated by metal-assisted chemical etching, and then TiO2 was introduced inside the PSi matrix using the atomic layer deposition technique. We performed scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray spectroscopy, Raman spectroscopy, ellipsometry, and photoluminescence (PL) spectroscopy to characterize the prepared and annealed PSi/TiO2 nanostructures. TEM and Raman analyses revealed that TiO2 had a crystalline anatase stru…
Surface and Electronic Features of Fluorinated TiO 2 and Their Influence on the Photocatalytic Degradation of 1-Methylnaphthalene
2020
International audience; Surface fluorination improves the photocatalytic activity of TiO2, and the influences of various features of fluorinated TiO2 (TiO2–F) have often been discussed in the literature. The present paper addresses the changes induced by surface fluorination on the morphological, structural, surface, and electronic features of TiO2. In particular, X-ray diffraction, specific surface area analysis, and transmission and scanning electron microscopy give evidence that surface fluorination does not affect the structural properties and the morphology of TiO2 nanoparticles. In contrast, fluorination induces changes of surface and electronic properties. Chemical and thermogravimet…
Photoassisted Oxidation of the Recalcitrant Cyanuric Acid Substrate in Aqueous ZnO Suspensions
2007
The photoassisted oxidative transformation of the highly recalcitrant cyanuric acid was examined in the liquid−solid regime at pH 3 and natural pH 7.5 under UV irradiation in oxygen- and ozone-saturated ZnO suspensions using ZnO as a photomediator. Loss of cyanuric acid was assayed by HPLC UV absorption spectroscopy, whereas intermediates and final products were determined by HPLC ion chromatography (IC), by MS techniques using an electrospray ionization mass spectrometer operated in the negative-ion mode, and by FT-IR spectroscopy. Final reaction products were CO2 gas and NO3- ions. The measure of nitrate in solution quantified the degree of mineralization of the substrate; its concentrati…
Structure Sensitivity of 2-Methyl-3-butyn-2-ol Hydrogenation on Pd: Computational and Experimental Modeling
2014
In the frame of DFT paradigms, the adsorption of 2-methyl-3-butyn-2-ol (MBY) and 2-methyl-3-buten-2-ol (MBE) on a Pd-30 cluster, including both {100} and {111} faces, was studied along with the pathways involved in the hydrogenation, taking place on plane and low coordination (corner/edge) sites of given MBY/Pd-30 and MBE/Pd-30 surface configurations. The calculated energetics, further validated by gas-phase and water-assisted gas-phase MBY and MBE hydrogenation, performed on well-defined size and shape-controlled Pd nanoparticles supported on SiO2, were able to explain the origin of the structure sensitivity and the high selectivity characterizing the title reaction when occurring in aqueo…