Search results for "Geothermal"

showing 10 items of 104 documents

The Desalination Process Driven by Wave Energy: A Challenge for the Future

2016

The correlation between water and energy is currently the focus of several investigations. In particular, desalination is a technological process characterized by high energy consumption; nevertheless, desalination represents the only practicable solution in several areas, where the availability of fresh water is limited but brackish water or seawater are present. These natural resources (energy and water) are essential for each other; energy system conversion needs water, and electrical energy is necessary for water treatment or transport. Several interesting aspects include the study of saline desalination as an answer to freshwater needs and the application of renewable energy (RE) devic…

EngineeringControl and Optimization020209 energywaterEnergy Engineering and Power Technology02 engineering and technologyGeothermal desalinationwaveDesalinationlcsh:Technologydesalination0202 electrical engineering electronic engineering information engineeringdesalination; water; renewable energy; waveElectrical and Electronic EngineeringEngineering (miscellaneous)Settore ING-IND/11 - Fisica Tecnica AmbientaleBrackish waterRenewable Energy Sustainability and the Environmentbusiness.industrylcsh:TElectric potential energyEnvironmental engineering021001 nanoscience & nanotechnologyNatural resourcerenewable energyRenewable energyWater treatment0210 nano-technologyEnergy sourcebusinessEnergy (miscellaneous)Energies
researchProduct

Fatigue crack growth behaviour of four structural steels in air and in a geothermal fluid environment

1992

Abstract In recent years the exploitation of geothermal energy has expanded rapidly in Italy. This has created a requirement for improved drilling technology, to reduce the number of failures occuring in the drills, which is more frequent than in oil wells. This paper deals with the results obtained in FCCR tests of four materials both in air and in two types of aggressive environments. Deterioration takes place by fatigue, corrosion fatigue and hydrogen embrittlement. It is concluded that the steel G105 is a suitable substitute for S135 in drill pipes, and inspections between drillings may be adequate to prevent failure for small-curvature wells.

EngineeringDrillbusiness.industryMechanical EngineeringGeothermal energyMetallurgyDrillingFracture mechanicsParis' lawIndustrial and Manufacturing EngineeringMechanics of MaterialsCorrosion fatigueModeling and SimulationDrill bitGeneral Materials SciencebusinessHydrogen embrittlementInternational Journal of Fatigue
researchProduct

Optimization of Osmotic Desalination Plants for Water Supply Networks

2016

Water scarcity and the poor quality of water resources are leading to a wider diffusion of desalination plants using the Reverse Osmosis (RO) process. Unfortunately, the cost of a cubic meter of fresh water produced by an RO plants is still high and many efforts are in progress to increase the efficiency of the membranes used in osmotic plants and to limit the energy required by the process. A further reduction of the energy cost could be obtained by an optimal operation of the desalination plant so reducing the hourly energy cost, or by coupling the RO plant with an energy production plant based on direct osmosis (Pressure Retarded Osmosis PRO). The economic viability of the desalination p…

EngineeringEnergy recoveryWaste managementbusiness.industryDesalination020209 energyPressure-retarded osmosisEnvironmental engineeringWater supplyOsmosiDesalination; Osmosis; PAT; Water supply network; Water Science and Technology; Civil and Structural Engineering02 engineering and technologyGeothermal desalinationDesalinationReverse osmosis plantSettore ICAR/01 - Idraulica0202 electrical engineering electronic engineering information engineeringWater supply networkbusinessReverse osmosisPATWater supply networkWater Science and TechnologyCivil and Structural Engineering
researchProduct

A novel hybrid polygeneration system supplying energy and desalinated water by renewable sources in Pantelleria Island

2017

Abstract In this paper a thermoeconomic analysis of a novel hybrid Renewable Polygeneration System connected to a district heating and cooling network is presented. The plant is powered simultaneously by solar and geothermal sources, producing electricity, desalinated water, heat and cooling energy. System layout includes Parabolic Through Collector (PTC) field, geothermal wells, Organic Rankine Cycle (ORC) unit and a Multi-Effect Desalination (MED) system. Cooling and thermal demands are calculated by suitable building dynamic simulation models, calibrated for Pantelleria Island. Electrical demand is obtained by measured data. A detailed control strategy has been implemented in order to pr…

EngineeringGeothermal020209 energy02 engineering and technologySolarGeothermal desalinationOrganic Rankine cycleDesalinationIndustrial and Manufacturing Engineering020401 chemical engineeringOperating temperatureDistrict heating and coolingSettore ING-IND/10 - Fisica Tecnica Industriale0202 electrical engineering electronic engineering information engineeringMulti-effect desalination0204 chemical engineeringElectrical and Electronic EngineeringGeothermal gradientCivil and Structural EngineeringOrganic Rankine cyclebusiness.industryMechanical EngineeringEnvironmental engineeringBuilding and ConstructionPollutionRenewable energyDistrict heating and cooling Geothermal Multi-effect desalination Organic Rankine cycle Parabolic through collector SolarDynamic simulationGeneral EnergyElectricityParabolic through collectorbusinessEnergy
researchProduct

A novel solar-geothermal trigeneration system integrating water desalination: Design, dynamic simulation and economic assessment

2016

Abstract In this paper, an innovative solar-geothermal polygeneration system is investigated. The system supplies a small community with electricity, desalinated water and space heating and cooling through a district network. The hybrid multi-purpose plant, based on an Organic Rankine Cycle (ORC) supplied by medium-enthalpy geothermal energy and by solar energy; this latter is provided by Parabolic Trough Collectors (PTC). The geothermal brine is first used to drive the ORC loop, then to provide space heating at around 85÷90 °C (in the winter), or cooling (in the summer, by means of a single-effect absorption chiller). Finally, the geothermal brine drives a Multi-Effect Distillation (MED) s…

EngineeringPayback period020209 energySolar energy Geothermy Polygeneration Desalination02 engineering and technologyTRNSYSDesalinationIndustrial and Manufacturing Engineering020401 chemical engineering0202 electrical engineering electronic engineering information engineeringParabolic troughSettore ING-IND/10 - Fisica Tecnica Industriale0204 chemical engineeringElectrical and Electronic EngineeringSolar energy Geothermal energy Polygeneration Desalination ThermoeconomicProcess engineeringGeothermal gradientCivil and Structural EngineeringOrganic Rankine cycleWaste managementbusiness.industryMechanical EngineeringGeothermal energyBuilding and ConstructionSolar energyPollutionGeneral Energybusiness
researchProduct

Membrane distillation: Solar and waste heat driven demonstration plants for desalination

2013

Abstract The development of small to medium size, autonomous and robust desalination units is needed to establish an independent water supply in remote areas. This is the motivation for research on alternative desalination processes. Membrane distillation (MD) seems to meet the specific requirements very well. This work is focused on experimental studies on full scale demonstration systems, utilizing a parallel multi MD-module setup. Three different plant concepts are introduced, one of them is waste heat driven and two of them are powered by solar thermal collectors. Design parameters and system design are presented. After the analysis of plant operation a comparison among the plants as we…

EngineeringSettore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciSolarthermieGeneral Chemical EngineeringFull scaleGeothermal desalinationMembrane distillationheat thermal energy storageDesalinationsteam generationSolarthermische KraftwerkeWaste heatGeneral Materials Scienceheat exchangerWater Science and TechnologyWaste managementbusiness.industryMechanical EngineeringHochtemperaturspeicherGeneral ChemistrySolar energyMembrane distillation system design solar energy desalination GORSpeichertechnologienSystems designbusinessSolarthermie und OptikThermal energy
researchProduct

Performance evaluation of CHCP hybrid seawater desalination plants

2007

There are many ways to improve efficiency and reduce fresh water cost in desalination plants, like the integration of two or more desalination systems into a hybrid mechanical/thermal lay-out. Most common results that could be achieved by hybrid systems are savings in pretreatments, overall cost reduction and significant primary energy savings, especially when cogeneration unit are concerned. In this paper a small size (2000 m 3 /day) thermal desalination system (MEE) is coupled with a single-stage seawater reverse osmosis (SWRO) system; the system is fed by a natural gas (NG) reciprocate engine, where heat is recovered both from exhaust gases and from the cooling jacket water circuit. Tech…

EngineeringWaste managementWater flowbusiness.industryMechanical EngineeringGeneral Chemical EngineeringLow-temperature thermal desalinationGeneral ChemistryGeothermal desalinationDesalinationCogenerationHybrid RO/MSFHybrid systemEnergy savingSettore ING-IND/10 - Fisica Tecnica IndustrialeGeneral Materials ScienceUnit costReverse osmosisbusinessWater Science and TechnologyCogeneration
researchProduct

Advanced Control Structure for Energy Management in Ground Coupled Heat Pump HVAC System

2008

Abstract Over the last 15 years, computerized controls have become more and more common in our homes. The smart home looks at expanding the use of the computers into the difference parts of the home, creating a network that can be easily and conveniently controlled. The use of computer controls removes the need to actually flick a switch and allows elements of the home to respond automatically to the people living in it. Successful control and heating ventilating and air-conditioning (HVAC) systems is a primary concern in building project: in order to achieve the required comfort and energy efficiency goals, a lot of variables must be coordinated and kept at particular pre-designed operatio…

Engineeringbusiness.industryEnergy managementControl engineeringGeneral MedicineTRNSYSlaw.inventionlawHome automationGeothermal heat pumpHVACbusinessHeat pumpEfficient energy useManagement control systemIFAC Proceedings Volumes
researchProduct

Efficiency increase in thermal desalination plants by matching thermal and solar distillation: theoretical analysis

2005

Abstract The effluent streams from MSF and MED plants retain substantial thermal and mechanical energy which is usually wasted as the streams are rejected into the environment. Recent environmental studies pose the question of environmental sustainability of desalination due to the large amount of heat and brine dissipated into the sea. Moreover the use of renewable energy so far have been confined to experimental studies or to the use in remote areas and no studies have been carried out on the coupling of a solar still plant with an existing thermal desalination installation in order to take advantage of the heat streams generated by the thermal plants. The combination of a solar desalinat…

Engineeringbusiness.industryMechanical EngineeringGeneral Chemical EngineeringLow-temperature thermal desalinationEnvironmental engineeringThermal power stationGeneral ChemistryGeothermal desalinationSolar stillDesalinationRenewable energyPhotovoltaic thermal hybrid solar collectorGeneral Materials ScienceSolar desalinationbusinessWater Science and TechnologyDesalination
researchProduct

A cellular automaton based model simulating HVAC fluid and heat transport in a building. Modeling approach and comparison with experimental results

2010

A discrete model characterizing heat and fluid flow in connection with thermal fluxes in a building is described and tested against experiment in this contribution. The model, based on a cellular automaton approach, relies on a set of a few quite simple rules and parameters in order to simulate the dynamic evolution of temperatures and energy flows in any water or brine based thermal energy distribution network in a building or system. Using an easy-to-record input, such as the instantaneous electrical power demand of the heating or cooling system, our model predicts time varying temperatures in characteristic spots and the related enthalpy flows whose simulation usually requires heavy comp…

Engineeringbusiness.industryMechanical EngineeringMechanical engineeringBuilding and ConstructionFan coil unitCellular automatonHeating systemGeothermal heat pumpHVACHeat transferFluid dynamicsElectrical and Electronic EngineeringbusinessThermal energyCivil and Structural EngineeringEnergy and Buildings
researchProduct