Search results for "Glass"
showing 10 items of 1153 documents
Diffusion of oxygen molecules in fluorine-doped amorphous SiO2
2010
Abstract Effects of fluorine doping on the diffusion of interstitial oxygen molecules (O2) in amorphous SiO2 (a-SiO2) were compared to those obtained from a-SiO2 containing SiOH groups. Incorporation of moderate concentration ( ∼ 1 0 19 cm−3) of SiF groups gives rise to minor changes in diffusion parameters between 800 and 1100 ° C: only a slight decrease in solubility and an increase in the activation energy for diffusion can be detected. Incorporation of SiOH groups has similar weak effects on the solubility and activation energy for diffusion. These minor changes are most likely due to the enhancement of the flexibility of local Si–O network as a result of the dissociation of the netwo…
The system of carbon fibre-reinforced plastics micro-tubes for self-healing of glass fibre-reinforced plastics laminates
2016
A system of pultruded carbon fibre-reinforced plastics micro-tubes is used for self-healing simulation in laminated polymer composite. The system consists of a package of micro-tubes, placed in the symmetry plane of the GFR/epoxy laminate stack. Healing agent is a mixture of the epoxy resin and hardener. The healing agent releases and penetrates into the cracks after the composite is damaged by the quasi-static indentation. The specimens are healed at 30℃ for 24 h. Rectangular specimens notched under ASTM D2733 have been subjected to tensile test to determine interlaminar shear strength. Shear strength of specimens has been compared in three states (virgin, damaged and healed) for various …
Magnetic-Field-Induced Locomotion of Glass Fibers on Water Surfaces: Towards the Understanding of How Much Force One Magnetic Nanoparticle Can Deliver
2009
Evidence for a glassy dynamics in (Rb-NH 4 ) 2 SO 4 mixed compounds
1996
An orientational glass behavior is evidenced in a [Rb0.7(NH4)0.3]2SO4 mixed crystal. Dielectric experiments (1 kHz–250 MHz) performed along the c-axis evidenced a polydispersive relaxation process. Its temperature dependence follows a Vogel-Fulcher law with a freezing temperature of 12 K.
Electrochemical impedance and moisture content of glass fabric
2012
The glass fiber fabrics have application at the wet conditions. Impedance measurements of sodium alumosilicate glass fabric in dependence on its moisture content are presented. The impact of pores of glass fibres and fabric components to electrochemical impedance of fabric are investigated and discussed.
In vitro degradation and bioactivity of composite poly-l-lactic (PLLA)/bioactive glass (BG) scaffolds: comparison of 45S5 and 1393BG compositions
2017
The objective of this study was to compare the effect of two bioglass (BG) compositions 45S5 and 1393 in poly-l-lactic composite scaffolds in terms of morphology, mechanical properties, biodegradation, water uptake and bioactivity. The scaffolds were produced via thermally induced phase separation starting from a ternary polymer solution (polymer/solvent/non-solvent). Furthermore, different BG to polymer ratios have been selected (1, 2.5, 5% wt/wt) to evaluate the effect of the amount of filler on the composite structure. Results show that the addition of 1393BG does not affect the scaffold morphology, whereas the 45S5BG at the highest amount tends to appreciably modify the scaffold archite…
'Cold' crystallization in nanostructurized 80GeSe2-20Ga2Se3 glass
2015
International audience; 'Cold' crystallization in 80GeSe 2-20Ga 2 Se 3 chalcogenide glass nanostructurized due to thermal annealing at 380°C for 10, 25, 50, 80, and 100 h are probed with X-ray diffraction, atomic force, and scanning electron microscopy, as well as positron annihilation spectroscopy performed in positron annihilation lifetime and Doppler broadening of annihilation line modes. It is shown that changes in defect-related component in the fit of experimental positron lifetime spectra for nanocrystallized glasses testify in favor of structural fragmentation of larger free-volume entities into smaller ones. Nanocrystallites of Ga 2 Se 3 and/or GeGa 4 Se 8 phases and prevalent GeSe…
The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene sty…
2015
Abstract Polycarbonate (PC)/acrylonitrile–butadiene–styrene terpolymer (ABS)/montmorillonite (MMT) nanocomposites have been obtained by melt compounding in a twin-screw extruder. Structural and elastic properties have been characterized. The theoretical analysis of the elastic properties of PC/ABS/MMT composite with a widely varied number of elementary layers in clay filler particles has been performed in order to estimate the influence of the degree of exfoliation of particles on the effect of reinforcement of the material. Results of the theoretical analysis have been compared with the experimental data about the effects of unmodified and two types of organically modified montmorillonite …
Multifunctional properties of nanocomposites made by 1D and 2D graphene based fillers
2015
High aspect ratio graphene based fillers with different dimensionalities showed the ability to greatly modify rheological, mechanical, thermal and electrical properties of polymers at very low content. In this work, the effect of filler dimensionality on the multifunctional properties of an epoxy matrix reinforced by both carbon nanotubes (1D) and graphite nanoplatelets (2D) have been investigated across the percolation region. Keywords-- Carbon nanotube, Graphite nanoplatelet, nanocomposites, mechanical properties, ...
Synthesis and Properties of Amine-Cured Epoxy/Organophilic Layered Silicate Nanocomposites
2009
Epoxy-layered silicate composites have been prepared by dispersing an organically modified montmorillonite (Nanofil 919) in an epoxy resin and curing in the presence of an aromatic hardener. Dispersion of the layered silicate within the epoxy matrix was verified using X-ray diffraction and transmission electron microscopy revealing that interaction improves upon organic silicate modification. Flexural properties and toughness increase with the organic silicate loading whereas glass transition temperature decreases and thermal stability remains practically unmodified.