Search results for "Gradation"
showing 10 items of 1275 documents
Competition between degradation and chain extension during processing of reclaimed poly(ethylene terephthalate)
1998
During processing of poly(ethylene terephthalate) (PET) hydrolytic chain scission, induced by the presence of small amounts of water, is the main cause of degradation. During repeated reprocessing chain scission can also occur because of the presence of other polymeric contaminants like PVC. In order to avoid or to limit hydrolytic chain cleavage adequate drying of PET before melt processing is necessary. Of course this practice is even more recommended when repeated processing steps are used, as for PET recycling. The behavior of recycling PET obtained from post-consumer water bottles when treated in a melt mixer under different conditions has been investigated in order to better understan…
Degradation Behavior of Nanocomposite Polymer Blends
2014
The usefulness of any material, including nanocomposite polymer blends, depends on its degradability and durability. Thus, this chapter reviews the status of the research on degradation of nanocomposite polymer blends and, in particular, on clay-nanocomposite polymer blends, paying particular attention to both the role of the filler and the role of the blend morphology and composition. The results of recent research indicate that the clay has two opposing effects on the thermal stability of a nanocomposite polymer blend: (1) a promoter effect of the polymer matrix degradation, which decreases the thermal stability, and (2) a barrier effect, which improves the thermal stability. Moreover, th…
Thermodynamically induced shear degradation
1988
The shear degradation of polymers in semiconcentrated solutions is viewed as a function of solvent quality. It is shown that the deterioration of the thermodynamic quality of the solvent leads to a marked flow resistance due to an increasing number of contacts between the chains. This may be probed by viscosimetric measurements as well as by degradation experiments (“thermodynamically induced shear degradation”). For a detailed discussion of this phenomenon the experimental setup for the mechanochemical experiment is outlined first, followed by a survey of the kinetics of chain scission. Finally, experiments mostly obtained on polystyrene in the theta-solvent trans-decalin are discussed. Th…
An Au(iii)–amino alcohol complex for degradation of organophosphorus pesticides
2015
An Au(III)–amino alcohol complex has been used to cleave organophosphorous pesticides of the dithiophosphate family. P–S bond breaking was readily demonstrated by 1H NMR, 31P NMR and MS. Thiol fragment release was also demonstrated using 2,4-dinitrobenzenesulfonyl fluorescein ethyl ester as a fluorescent sensor.
Influence of soil properties on the aggregation of some Mediterranean soils and the use of aggregate size and stability as land degradation indicators
2001
Abstract Soil aggregation in relation to other soil properties was studied along a climatological transect in the Southeast of Spain. Three sites were selected along this transect ranging from semiarid to subhumid climatological conditions. The aggregate size distribution, the macro and microaggregate stability of the superficial soil horizon and their relations with other soil properties were analysed. Large aggregates (>10, 10–5, 5–2 mm) were present in highest proportions in the most arid of the studied areas. These large aggregates were associated with high values of water-stable microaggregates; however, they did not improve soil structure and are related to high bulk densities and low…
Photocatalytic degradation of 4-nitrophenol in aqueous suspension by using polycrystalline TiO2 impregnated with functionalised Cu(II)-porphyrin or C…
2003
The photocatalytic activity of polycrystalline TiO2 samples impregnated with functionalized Cu(II)- or metal-free porphyrins has been investigated. A probe reaction, i.e., 4-nitrophenol (4-NP) photodegradation in aqueous suspension, has been used. The results indicated that the presence of the sensitizers is beneficial for the photoactivity and suggest an important role of Cu(II). A comparison with similar samples impregnated with modified Cu(II)- and metal-free phthalocyanines showed that the presence of porphyrin is more beneficial both for the decomposition rate of 4-nitrophenol and for the disappearance of nonpurgeable organic carbon (NPOC). Experiments were carried out by using cutoff …
Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state – Part II: Thermal and thermo-oxidative degradation…
2015
Abstract Thermal and thermo-oxidative degradation of nanocomposites based on polyamide 11 (PA11) and organo-modified clay (Cloisite® 30B) are studied in the melt state (T = 215 °C) via time-resolved mechanical spectroscopy (TRMS). The goal is assessing the potentiality of rheological analysis for studying polymer degradation in complex systems such as polymer nanocomposites, whose rheological response stems from the combination of the contributions of polymer and nanoparticles. We prove that a thorough analysis grounded on TRMS allows to isolate the effect of degradation of the polymer matrix, whose progress can be hence profitably monitored. Essentially the same degradation mechanisms as i…
Photodegradation of polyglycidol in aqueous solutions exposed to UV irradiation
2011
The photodegradation of polyglycidol in aqueous solution with UV wavelength of 254 nm was investigated. The experiments were carried out in air at a constant temperature and the photodegradation of polyglycidol (PGl) was compared to that of poly(ethylene oxide) (PEO), the most widely studied polyether. Size exclusion chromatography with multiangle light scattering detection (SEC-MALLS) was used to measure the changes in the molar masses and molar mass dispersities of polymers during degradation. The molar mass of PGl decreased dramatically during the first period of UV irradiation and then gradually approached a limiting value of 17,000 g/mol, regardless of the initial polymer concentration…
Processability and Properties of Re-Graded, Photo-Oxidized Post-Consumer Greenhouse Films
2005
The recycling of post‐consumer plastics leads, in general, to secondary materials having properties worse than those of the reclaimed material and certainly worse than those of the same virgin polymer. This is because of the degradation undergone by the objects during their use and because of the thermo‐mechanical degradation undergone during the reprocessing operations. The change of the molecular architecture is responsible for this worsening of properties. The use of stabilizing systems can slow the degradation during the melt processing but cannot give any improvement of the final properties of the material. In order to enhance the properties of the recycled plastics, some rebuilding of…
Re-gradation of Photo-oxidized Post-consumer Greenhouse Films
2005
The degradation undergone by the polymers during their use and because of the thermo-mechanical degradation undergone during the reprocessing operations provokes, among other effects, the decrease of the molecular weight. The change of the molecular architecture is responsable for the deterioration of all the properties. In order to restore the properties of post-consumer recycled plastics, some rebuilding of the molecular structure is necessary. In this work, photo-oxidized films for greenhouses were reprocessed in presence of additives able to react with the polyethylene in order to form branching and cross-linking, improving the properties of these post-consumer plastic.