Search results for "Gradation"
showing 10 items of 1275 documents
Degradation of Diazinon based on photoelectrocatalytic technique using enhanced WO3 nanostructures: Mechanism and pathway
2021
[EN] In this work, a resistant and toxic pesticide called diazinon was degraded through the photoelectrocatalysis (PEC) technique using tungsten oxide (WO3) nanostructures, applying an external bias of 1VAg/AgCl and simulated solar illumination. For this, WO3 nanostructures have been synthesized using electrochemical anodization in 0.05 M hydrogen peroxide and 1.5 M of different acidic electrolytes: H2SO4, CH4O3S or HNO3. Morphology, composition and crystallinity of the samples were evaluated through Field Emission Scanning Electron Microscopy (FE-SEM), Atomic Force Microscopy (AFM) and Raman Spectroscopy. Then, the photoelectrochemical properties of the samples were analyzed by Photo-Elect…
SERS activity of photoreduced silver chloride crystals
2019
Metal nanoparticles are widely acclaimed as plasmonic substrates for surface -enhanced Raman spectroscopy (SERS) due to their unique particle plasmon resonances at visible and near infrared regions. Silver nanoparticles are typically employed in SERS when the targeted Raman signature zone of analytes lies at ultra-violet and/or blue to green spectral regimes. Even though silver has strong plasmonic properties, silver-based substrates are often affected by the atmospheric oxidation and show degradation in their SERS performance. One way to overcome this limitation is to use silver chloride crystals as oxidation resistant intermediate and photoreduce them to 'fresh' silver just before SERS an…
One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications
2020
Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…
Impact of amplitude jitter and signal-to-noise ratio on the nonlinear spectral compression in optical fibres
2017
International audience; We numerically study the effects of amplitude fluctuations and signal-to-noise ratio degradation of the seed pulses on the spectral compression process arising from nonlinear propagation in an optical fibre. The unveiled quite good stability of the process against these pulse degradation factors is assessed in the context of optical regeneration of intensity-modulated signals, by combining nonlinear spectral compression with centered bandpass optical filtering. The results show that the proposed nonlinear processing scheme indeed achieves mitigation of the signal's amplitude noise. However, in the presence of a jitter of the temporal duration of the pulses, the perfo…
Donor/Acceptor Heterojunction Organic Solar Cells
2020
The operation and the design of organic solar cells with donor/acceptor heterojunction structure and exciton blocking layer is outlined and results of their initial development and assessment are reported. Under halogen lamp illumination with 100 mW/cm2 incident optical power density, the devices exhibits an open circuit voltage VOC = 0.45 V, a short circuit current density JSC between 2 and 2.5 mA/cm2 with a fill factor FF &asymp
One-step synthesis and deposition of ZnFe2O4 related composite films via SPPS route for photodegradation application
2019
Binary spinel-type metal oxides (AB2O4) related materials, including ferrites (AFe2O4), are attractive photocatalysts thanks to their excellent visible light response for the photodegradation of organic pollutants. Currently, these materials are synthesized via conventional chemical routes suffering from long preparation duration and multistep. Moreover, the photocatalysts are obtained as nano-powders from conventional chemical routes would introduce another drawback for their recycling and reuse. From an industrial perspective, it is desirable to develop an efficient and facile synthesis process to produce photocatalysts in a non-dispersible form. Herein, we demonstrate that the solution p…
Tunable morphologies of ZnO films via the solution precursor plasma spray process for improved photocatalytic degradation performance
2018
Abstract The Solution Precursor Plasma Spray (SPPS) process is a novel, versatile and one-step route for building photocatalytic films. Herein, the influence of the precursor solution composition on the microstructure and on the properties of ZnO films prepared via the SPPS process was studied. Nanostructured ZnO particles (i.e. nanorods (NRs) and nanowires (NWs)) were obtained by using a solution of pure Zn(OAc)2 rather than pure Zn(NO3)2. Upon adding urea to the Zn(NO3)2 solution, NRs structured ZnO films were formed as well. The addition of acetic acid into the Zn(OAc)2 solution led to a damage of the nanostructured morphologies likely due to the inhibition of the zinc-containing cluster…
Passive Behavior and Passivity Breakdown of AISI 304 in LiBr Solutions through Scanning Electrochemical Microscopy
2014
The passive behavior and passivity breakdown of AISI 304 stainless steel in LiBr solutions has been investigated by means of scanning electrochemical microscopy (SECM). The sample generation - tip collection (SG-TC) mode was used to operate the SECM and the tip potential was biased to detect the electroactive species. The evolution of the current at the ultramicroelectrode tip with the applied potential within the passive range was followed at different LiBr concentrations. Results show that the absolute value of the current at the tip increases with the applied potential. Additionally, SECM was also used to detect stable pits formed on the stainless steel surface in a 0.2 M LiBr solution. …
Preferred Growth Direction by PbS Nanoplatelets Preserves Perovskite Infrared Light Harvesting for Stable, Reproducible, and Efficient Solar Cells
2020
Formamidinium-based perovskite solar cells (PSCs) present the maximum theoretical efficiency of the lead perovskite family. However, formamidinium perovskite exhibits significant degradation in air. The surface chemistry of PbS has been used to improve the formamidinium black phase stability. Here, the use of PbS nanoplatelets with (100) preferential crystal orientation is reported, to potentiate the repercussion on the crystal growth of perovskite grains and to improve the stability of the material and consequently of the solar cells. As a result, a vertical growth of perovskite grains, a stable current density of 23 mA cm(-2), and a stable incident photon to current efficiency in the infr…
Degradation mechanisms in organic lead halide perovskite light-emitting diodes
2019
Organic–inorganic metal halide perovskites have attracted significant attention for low-cost, high-efficiency, color-pure light-emitting applications. However, as seen in many reports so-far, perovskite light-emitting diodes (PeLED) suffer from poor operational lifetime, limiting their practical use. The underlying degradation mechanism is a topic of crucial importance. Here, the degradation mechanisms of methylammonium lead bromide based PeLED are investigated. When the PeLED is electrically biased, there is an initial raise in the luminance followed by a rapid reduction in luminance and current density. Microscopic studies reveal the formation of micrometer-sized spots that are photolumin…