Search results for "Grain Size"
showing 10 items of 131 documents
Finite element simulation of diffusion into polycrystalline materials
2008
Diffusion in polycrystalline materials is investigated by means of numerical finite element simulations for constant source conditions. The grain boundaries are assumed to provide fast diffusion paths. Main emphasis is put on situations that typically occur for nanocrystals, viz. on situations in which (i) the diffusion length is significant compared with grain size, (ii) the influence of boundaries that are parallel to the surface become important in addition to the perpendicular ones. Furthermore, we treat the influence of blocking space charge layers sandwiching the core pathways and thus channeling grain boundary diffusion.
Neutron scattering study of structural and magnetic size effects in NiO
2013
Nickel oxide powders with the grain size of 13–1500 nm have been studied by neutron scattering, scanning electron microscopy and vibrating sample magnetometry. We have found that the atomic structure and the antiferromagnetic ordering are nearly independent of the average size of grains. The existence of the uncompensated spins in nanoparticles with the grain size below 100 nm has been detected.
Spark plasma sintering of cobalt ferrite nanopowders prepared by coprecipitation and hydrothermal synthesis.
2007
International audience; Cobalt ferrite exhibits a high coercivity at room temperature and a strong magnetic anisotropy compared to the other spinel ferrites and, consequently appears as an interesting material for permanent magnets and high-density recording. The magnetic properties depend also on the crystallite size. In order to keep the powder properties in a bulk material, dense nanostructured cobalt ferrite has to be sintered. A field activated sintering process like spark plasma sintering (SPS) may be promising for such challenge. The present paper deals with: (i) the preparation of cobalt ferrite by two methods: coprecipitation and hydrothermal synthesis in supercritical water; (ii) …
Influence of Electromechanical Fields on Dielectric Properties of PLZT−x/65/35 Ceramics (x = 6 and 7)
2011
High density and transparent PLZT−x/65/35 (x = 6 and 7) ceramics with the average grain size of 5–7 μm was obtained by two−stage hot−pressing technology. The measurements of temperature/frequency dependence of the permittivities of these ceramics under uniaxial pressure (0–100 MPa) applied parallel to the ac electric field have been carried out. It was found that uniaxial pressure significantly influences dielectric properties of these ceramics. With the increase of pressure the maximum intensity in ϵ(T) curve decreases, becomes more diffuse and shifts towards higher temperature, dielectric dispersion decreases and classical ferroelectric seems to change to relaxor one. It was concluded, th…
Oxidation of nanocrystalline aluminum by variable charge molecular dynamics
2010
International audience; We investigate the oxidation of nanocrystalline aluminum surfaces using molecular dynamics (MD) simulations with the variable charge model that allows charge dynamically transfer among atoms. The interaction potential between atoms is described by the electrostatic plus (Es+) potential model, which is composed of an embedded atom method potential and an electrostatic term. The simulations were performed from 300 to 750K on polycrystalline samples with a mean grain size of 5 nanometers. We mainly focused on the effect of the temperature parameter on the oxidation kinetic. The results show that, beyond a first linear regime, the kinetics follow a direct logarithmic law…
Large scale synthesis of nanostructured zirconia-based compounds from freeze-dried precursors
2013
Nanocrystalline zirconia powders have been obtained at the multigram scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous acetic solutions. This technique has equally made possible to synthesize a variety of nanostructured yttria or scandia doped zirconia compositions. SEM images, as well as the analysis of the XRD patterns, show the nanoparticulated character of those solids obtained at low temperature, with typical particle size in the 10–15 nm range when prepared at 673 K. The presence of the monoclinic, the tetragonal or both phases depends on the temperature of the thermal treatment, the doping concentration and the nature of the dopant. In addition,…
Mechanical activation conditions of the Fe2O3 and V2O3 mixture powders in order to obtain a nanometric vanadium spinel ferrite
1999
Abstract Co-milling of iron and vanadium oxides allows to obtain an intimate oxides mixture at a nanoscale, similar to a coprecipitate elaborated by soft chemistry. Reduction of such a mixture in the same temperature and oxygen partial pressure conditions (500°C and 10−25 Pa) as the soft chemistry products leads to a nanometric vanadium ferrite with the only spinel phase. The characterization of the powders is achieved by X-ray diffraction (XRD), scanning electron microscopy, infrared (IR) spectrometry, thermogravimetry and calorimetry. Homogeneity of grain size and chemical composition is reached if the initial oxides have similar grain size.
Relation between grain size and hydrogen diffusion coefficient in an industrial Pd–23% Ag alloy
1999
Abstract The diffusion mechanism of hydrogen in an industrial cold worked Pd–23% Ag alloy is investigated according to its grain size. The microstructural parameters are determined by X-ray diffraction analysis and the diffusion parameters are determined using the galvanostatic electrochemical permeation technique. Two diffusion mechanisms are displayed. For apparent grain size below 40 nm the hydrogen atoms diffuse in the grain boundaries. For grain size above 100 nm, an intergranular diffusion mechanism occurs. For intermediate grain size both mechanisms coexist. Furthermore, the diffusion in the grain boundaries is not faster than the diffusion in the bulk, as generally observed for pure…
Continuous hydrothermal synthesis of nanometric BaZrO3 in supercritical water
2007
Abstract Nanocrystalline barium zirconate (BaZrO 3 ) was synthesized using a hydrothermal synthesis process working in supercritical conditions and in a continuous way. By this method, we succeeded in the continuous and rapid production of nanopowders. As a preliminary work three barium precursors have been investigated: barium hydroxide (Ba(OH) 2 ), barium acetate (Ba(CH 3 COO) 2 ) and barium nitrate (Ba(NO 3 ) 2 ). Two of them (Ba(CH 3 COO) 2 and Ba(NO 3 ) 2 ) led to the pure perovskite phase. Then an experimental design has been conducted in order to determine the influence of the experimental parameters on the crystallinity and the grain size of the final product.
Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering
2013
International audience; Spark plasma sintering (SPS) has been used to sinter a milled oxide dispersion-strengthened (ODS) FeAl powder in order to prepare dense nanostructured parts. The effect of processing conditions including sintering temperature, holding time and degassing treatments on the microstructure and mechanical properties of the as-sintered materials was investigated. A hetero-nanostructure that contains nano, ultrafine and micrometric grains was confirmed to be developed whatever the processing window, due to the large temperature difference generated during the SPS process itself. The grain size distribution can be tailored by selecting a combination of sintering temperature …