Search results for "Guided wave"

Coded excitation speeds up the detection of the fundamental flexural guided wave in coated tubes

2016

The fundamental flexural guided wave (FFGW) permits ultrasonic assessment of the wall thickness of solid waveguides, such as tubes or, e.g., long cortical bones. Recently, an optical non-contact method was proposed for ultrasound excitation and detection with the aim of facilitating the FFGW reception by suppressing the interfering modes from the soft coating. This technique suffers from low SNR and requires iterative physical scanning across the source-receiver distance for 2D-FFT analysis. This means that SNR improvement achieved by temporal averaging becomes time-consuming (several minutes) which reduces the applicability of the technique, especially in time-critical applications such as…

Energy leaks through the optical barrier created by H+ implantation in BaTiO3 and LiNbO3 planar waveguides

1998

Abstract The energy leaks through the index barrier created by the proton implantation process are put in evidence in planar optical waveguides made in BaTiO 3 and LiNbO 3 substrates. The selective detection of the light emerging from the guiding region permits to measure the optical attenuation of the guided wave. The results obtained on mono or twice implanted LiNbO 3 and BaTiO 3 waveguides are presented and discussed. It is shown that the light confinement is better in BaTiO 3 than in LiNbO 3 .

Parametric conversion in micrometer and sub-micrometer structured ferroelectric crystals by surface poling

2012

We report on recent technological improvements concerning nonlinear patterning of lithium niobate and lithium tantalate in the micrometer and submicrometer scales using surface periodic poling for ferroelectric domain inversion. The fabricated samples were employed for frequency doubling via quasiphase-matching both in bulk and guided wave geometries, including forward and backward configurations and wavelength conversion in bands C and L. We also investigated short-period quasiperiodic samples with randomly distributed mark-to-space ratios.

Photo-acoustic excitation and detection of guided ultrasonic waves in bone samples covered by a soft coating layer

2012

Photo-acoustic (PA) excitation was combined with skeletal quantitative ultrasound (QUS) for multi-mode ultrasonic assessment of human long bones. This approach permits tailoring of the ultrasonic excitation and detection so as to efficiently detect the fundamental flexural guided wave (FFGW) through a coating of soft tissue. FFGW is a clinically relevant indicator of cortical thickness. An OPO laser with tunable optical wavelength, was used to excite a photo-acoustic source in the shaft of a porcine femur. Ultrasonic signals were detected by a piezoelectric transducer, scanning along the long axis of the bone, 20-50 mm away from the source. Five femurs were measured without and with a soft …

Guided-wave frequency doubling in surface periodically poled lithium niobate: competing effects

2007

We carried out second-harmonic generation in quasi-phase-matched ? -phase lithium niobate channel waveguides realized by proton exchange and surface periodic poling. Owing to a limited ferroelectric domain depth, we could observe the interplay between second-harmonic generation and self-phase modulation due to cascading and cubic effects, resulting in a nonlinear resonance shift. Data reduction allowed us to evaluate both the quadratic nonlinearity in the near infrared as well as the depth of the uninverted domains. © 2007 Optical

FIBER AND GUIDED WAVE OPTICS | Nonlinear Effects (Basics)

2005

MWP phase shifters integrated in PbS-SU8 waveguides

2015

[EN] We present new kind of microwave phase shifters (MPS) based on dispersion of PbS colloidal quantum dots (QDs) in commercially available photoresist SU8 after a ligand exchange process. Ridge PbS-SU8 waveguides are implemented by integration of the nanocomposite in a silicon platform. When these waveguides are pumped at wavelengths below the band-gap of the PbS QDs, a phase shift in an optically conveyed (at 1550 nm) microwave signal is produced. The strong light confinement produced in the ridge waveguides allows an improvement of the phase shift as compared to the case of planar structures. Moreover, a novel ridge bilayer waveguide composed by a PbS-SU8 nanocomposite and a SU8 passive…

Assessment of the fundamental flexural guided wave in cortical bone by an ultrasonic axial-transmission array transducer

2013

Abstract The fundamental flexural guided wave (FFGW), as modeled, for example, by the A0 Lamb mode, is a clinically useful indicator of cortical bone thickness. In the work described in this article, we tested so-called multiridge-based analysis, based on the crazy climber algorithm and short-time Fourier transform, for assessment of the FFGW component recorded by a clinical array transducer featuring a limited number of elements. Methods included numerical finite-element simulations and experiments in bone phantoms and human radius specimens ( n  = 41). The proposed approach enabled extraction of the FFGW component and determination of its group velocity. This group velocity was in good ag…

Photo-acoustic phase-delayed excitation of guided waves in coated bone phantoms

2013

Photo-acoustic skeletal quantitative ultrasound enables assessment of the fundamental flexural guided wave (FFGW) propagating in bone. This mode, consistent with the F(1,1) tube mode can now be measured through a coating of soft tissue. Interference due to ultrasound propagation in the soft tissue surrounding the bone is reduced by using phase-delayed ultrasound excitation. Photo-acoustic phase-delayed excitation was done on five axisymmetric bone phantoms (1-5 mm wall thickness), coated by a 5 mm thick soft-tissue mimicking layer. A fiber head comprising a linear array of four optical fibers (400 μm diameter), illuminated by pulsed laser diodes (905 nm wavelength) generated ultrasound. Thi…

Ultrasonic Guided Wave Inspection of Bonded Lap Joints: Noncontact Method and Photoelastic Visualization

2001

The main topic of this paper is the nondestructive inspection of adhesively bonded lap joints by using ultrasonic guided (plate) waves. A noncontact, couplant-free method that employs capacitive air-coupled transducers is demonstrated for the inspection of thin aluminum joints with dimensions typical of aircraft fuselage and wing panels. Two types of bond defects, disbonded regions and regions of poorly cured (low-cohesive-strength) adhesive, are successfully detected by measuring the amplitude decrease of selected plate waves leaking from one adherend to the other one through the bondline. It is shown that proper choice of the vibrating mode structure, in terms of cross-sectional displacem…