Search results for "Hard"
showing 10 items of 2294 documents
Development of a 3D CZT detector prototype for Laue Lens telescope
2010
We report on the development of a 3D position sensitive prototype suitable as focal plane detector for Laue lens telescope. The basic sensitive unit is a drift strip detector based on a CZT crystal, (similar to 19x8 mm(2) area, 2.4 mm thick), irradiated transversally to the electric field direction. The anode side is segmented in 64 strips, that divide the crystal in 8 independent sensor (pixel), each composed by one collecting strip and 7 (one in common) adjacent drift strips. The drift strips are biased by a voltage divider, whereas the anode strips are held at ground. Furthermore, the cathode is divided in 4 horizontal strips for the reconstruction of the third interaction position coord…
Spectral function for overoccupied gluodynamics from real-time lattice simulations
2018
We study the spectral properties of a highly occupied non-Abelian non-equilibrium plasma appearing ubiquitously in weak coupling descriptions of QCD matter. The spectral function of this far-from-equilibrium plasma is measured by employing linear response theory in classical-statistical real-time lattice Yang-Mills simulations. We establish the existence of transversely and longitudinally polarized quasiparticles and obtain their dispersion relations, effective mass, plasmon frequency, damping rate and further structures in the spectral and statistical functions. Our new method can be interpreted as a non-perturbative generalization of hard thermal loop (HTL) effective theory. We see indica…
Update on the TowerJazz CMOS DMAPS development for the ATLAS ITk
2019
The upgrade of the ATLAS tracking detector for the High-Luminosity Large Hadron Collider at CERN requires the development of novel radiation hard silicon sensor technologies. For the de- velopment of depleted CMOS sensors for ATLAS we combined small electrodes with minimal capacitance and advanced processing for fully depleted active sensor volume to achieve radiation hard CMOS sensors in line with ATLAS ITk specifications. Based on initial studies on the prototype sensor “TowerJazz Investigator” we have now developed, produced and tested a first full-size depleted CMOS sensor based on the 180nm TowerJazz imag- ing process, the so-called “MALTA” sensor. The sensor combines special low-noise…
Advanced Giant Magnetoresistance (GMR) sensors for Selective-Change Driven (SCD) circuits
2021
Nowadays, bio-inspiration is driving novel sensors designs, beyond vision sensors. By taking advantage of their compatibility with standard CMOS technologies, the integration of giant magneto-resistance (GMR) based magnetic sensors within such event-driven approaches is proposed. With this aim, several topologies of such GMR sensors have been designed, fabricated and characterized. In addition, integrated circuit interfaces of a standard CMOS technology are also proposed. Their suitability for this approach is then demonstrated by means of Cadence IC simulations.
In vitro evaluation of biomimetic chitosan-calcium phosphate scaffolds with potential application in bone tissue engineering.
2013
This work reports on the physicochemical properties and in vitro cytotoxicity assessment of chitosan–calcium phosphate (Cs–CP) scaffolds for bone tissue engineering, which were synthesized by a novel biomimetic co-precipitation method. X-ray diffraction (XRD) along with scanning electron microscopy (SEM) analysis confirmed the porous morphology of the scaffolds and the amorphous nature of the inorganic phase with different crystallite sizes and the formation of various forms of calcium phosphate. Compressive mechanical testing revealed that the Young’s modulus of the biomaterials is in the range of human trabecular bone. In vitro tests were performed on the biomaterials for up to 14 days to…
The TileCal Optical Multiplexer Board 9U
2011
Abstract TileCal is the hadronic calorimeter of the ATLAS experiment at LHC/CERN. The system contains roughly 10,000 channels of read-out electronics, whose signals are gathered and digitized in the front-end electronics and then transmitted to the counting room through two redundant optical links. Then, the data is received in the back-end system by the Optical Multiplexer Board (OMB) 9U which performs a CRC check to the redundant data to avoid Single Event Upsets errors. A real-time decision is taken on the event-to-event basis to transmit single data to the Read-Out Drivers (RODs) for processing. Due to the low dose level expected during the first years of operations in ATLAS it was deci…
Evaluation of Small Vase and Y-trellis Orchard Systems for Peach and Nectarine Production in Mediterranean Regions
2015
Two peach planting systems, Small Vase (SV) and Y-trellis (Y), were evaluated and compared in the Mediterranean settings of Southern Italy. The two orchards were located next to each other on relatively uniform soil and terrain, and the observations included two peach (âRich Mayâ and âSummer Richâ) and two nectarine (âBig Bangâ and âNectarossâ) cultivars. In the SV system, trees were spaced at 4.5 A 2.5 m (888 trees/ha), whereas in the Y system, trees were spaced at 5.5 A 2 m (909 trees/ha) and no canopy gap was left between rows. Yield per tree; fruit size grade; unit price of sold peaches for each size grade; materials, labor and associated costs for cultural management;…
Vegetative and productive responses of ‘Conference’ and ‘Williams’ pear trees planted at different in-row spacings
2006
Abstract The effect of in-row spacing on the vegetative and productive performance of 4-year-old ‘Conference’ (CON) and ‘Williams’ (WIL) pear trees was studied. Analysis of digital images was used to estimate canopy growth and conformation. Fruit quality was determined by measuring fruit weight, flesh firmness, peel color, soluble solid content, and titratable acidity. WIL produced more and more efficiently than CON, especially at closer spacings. WIL canopies were generally bigger than CON canopies, and reduced spacing penalized stem growth and influenced canopy conformation. Root growth and conformation was similar for both cultivars, whereas decreasing in-row spacing reduced root dry wei…
Micrometeorological and sap flow measurement of water vapour exchanges in olive: Scaling up from canopy to orchard
2009
A comparison of water consumption evaluated at tree and orchard level was carried out in a commercial olive orchard located in Sicily using up-scaled sap-flow evapotranspiration estimations and eddy covariance measurements. Sap flow probes were installed on olive trees placed in one of the four plots characterizing a heterogeneous orchard. Trees were chosen, from a preliminary footprint analysis, in correspondence to the peak of the “relative normalized contribution” to flux for the prevailing wind conditions measured by an eddy covariance station localized in the central part of the orchard. Tree-age and planting density as well as main tree and orchard characteristics (Leaf Area per tree,…
Monitoring Yield and Fruit quality parameters in Open-Canopy Tree crops under Water Stress. Implications for ASTER
2007
Work on water stress detection at tree and orchard levels using a high-spatial airborne thermal sensor is presented, showing its connection with yield and some fruit quality indicators in olive and peach commercial orchards under different irrigation regimes. Two airborne campaigns were conducted with the Airborne Hyperspectral Scanner (AHS) over olive and peach orchards located in Córdoba, southern Spain. The AHS sensor was flown at three different times on 25 July 2004 and 16 July 2005, collecting 2 m spatial resolution imagery in 80 spectral bands in the 0.43– 12.5 μm spectral range. Thermal bands were assessed for the retrieval of land surface temperature using the split-window algorith…